AUTOMATIC INSULATION STRIPPER WITH CUTTER AND CRIMPER + PRESSURE FORCE REGULATOR AND LIMITER

• AUTOMATIC INSULATION STRIPPER – This practical tool will allow you to quickly and precisely remove insulation from single-core or multi-core cables. To remove the insulation, insert the cable into the jaws so that it adheres evenly to the tool - then squeeze the handle.

• CABLE CUTTER - Another useful function of a wire stripper is cutting wires. The 11 mm long blade is located between the tool handles. To cut a wire of similar or smaller width, simply place it between the blades and squeeze it tightly.

• CONNECTOR TERMINAL CRIMPER - Using the device, we can also crimp insulated and uninsulated connector terminals on wires with a cross-section of 1.5 mm2 to 6 mm2. To perform this operation, you must insert a wire with a stripped tip and insert it into the connector terminal, then place it in the place intended for crimping (INSUL CRIMPER) and tighten the handle tightly.

• FORCE ADJUSTMENT + LIMITER - the device has a small knob located under the jaws. Using it, you can adjust the pressure on the insulation, so you don't have to worry about damaging the wire while working. Additionally, the cuff has an adjustable length limiter.

• SPECIFICATIONS - color: yellow-black; material: zinc alloy, others: PP + TPR + steel; anti-slip overlay: YES; mechanism: front, automatic; stripping insulation from cables with a diameter of: 0.2 - 6 mm 2 (10 - 24 AWG); crimping insulated connector terminals: 0.5 - 6 mm 2 (22-10 AWG) and non-insulated: 4 - 6 mm2 (12-10 AWG), 1.5 - 2.5 mm2 (16-14 AWG), 05 - 1mm2 (22-18 AWG); dimensions (length/width/height): 20/10/3 cm; weight: 0.35 kg; weight in package: 0.4 kg.

SPECIFICATION

• color: yellow-black;
• functions: stripping, crimping, cutting, adjustment knob, adjustable length stop;
• material: zinc alloy, others: PP + TPR + steel
• anti-slip overlay: YES;
• mechanism: front, automatic;
• stripping insulation from cables with a diameter of: 0.2 - 6 mm 2 (10 - 24 AWG); crimping insulated connector terminals: 0.5 - 6 mm 2 (22-10 AWG) and non-insulated: 4 - 6 mm2 (12-10 AWG), 1.5 - 2.5 mm2 (16-14 AWG), 05 - 1mm2 (22-18 AWG);
• dimensions (length/width/height): 20/10/3 cm;
• weight: 0.35 kg;
• weight in package: 0.4 kg.