Description
Wybot A1 wireless pool cleaning robot
Wybot A1 is a state-of-the-art pool robot that provides effective and convenient cleaning of the pool bottom without manual intervention. Thanks to its dual drive, improved filtration system and intensive edge cleaning function, it can handle all kinds of debris - from sand to leaves and hair. It's the perfect solution for people who want to enjoy crystal-clear water without too much effort.
Efficient operation and fast charging
The Wybot A1 offers 120 minutes of continuous operation, which allows it to clean an area of up to 100 square meters regardless of its shape - it performs well in rectangular, round, kidney-shaped and other irregularly shaped pools. Once the cycle is complete, it takes only 2.5 hours to charge, making the device ready for another cleaning session in no time.
Intelligent edge cleaning
The robot is equipped with WINS Edge Cleaning, which makes it stop for a few seconds after touching the pool wall to clean the edges more thoroughly. This eliminates dirt from areas that are often overlooked by standard cleaners.
Improved filtration system
The Wybot A1 uses a two-layer filtration system that effectively catches all dirt, including sand, small leaves, pebbles, small twigs, hair and dust. The 180 µm filter captures even the smallest dirt particles, ensuring crystal clear water. For best results, it is recommended to clean the filter every 30 minutes in heavily soiled pools.
Simple operation and LED indicators
The robot is designed for maximum ease of use. Intuitive one-button controls allow for quick start-up, and built-in LED indicators show the operating status, battery level and selected cleaning mode.
Lightweight design and easy removal
Thanks to its compact design, the Wybot A1 is easy to handle and carry. It can be easily taken out of the water, making it a convenient solution for both above-ground and built-in pool owners. The robot works well in pools up to 3 meters deep.
Versatility and eco-friendly solution
Wybot A1 is designed for cleaning flat pool surfaces, regardless of the material - it performs well on vinyl, ceramic, mosaic, fiberglass, polyethylene and cement. Its performance not only saves time and energy, but also helps reduce the use of chemicals, making it an eco-friendly choice for any pool owner.
Included
- Robot x1
- Lever x1
- Filter (cotton foam +180μm)
- Hook x1
- User manual x1
- Quick guide x1
- Charger x1
- Screw x1
| Manufacturer |
Wybot |
| Model |
A1 |
| Pool dimensions |
80m2~100m2 |
| Working depth |
Max.3m and Min.60cm |
| Dimensions |
345*315*170mm |
| Weight |
3.5kg |
| Operating time |
2h |
| Charging time |
2.5 h |
| Voltage |
22.2V |
| Power |
33W |
| Charger input |
100-240V, 50-60Hz |
| Charger output |
25.2V/1A |
| Battery capacity |
2600mAh |
| Filter |
Two-level filtration |
| Flow rate |
8.1 m3/H |
| Movement speed |
16m/min |
| Water resistance |
IPX8 |
