Ancel BM700 OBD2 diagnostic scanner
- Laevad täna! Toode on laos meie Soomes asuvas laos. Tellimused saadetakse tavaliselt sama või järgmise tööpäeva jooksul väga kiiresti. Tarneaeg sõltub sihtriigist.
- Laevad 4–7 päeva jooksul Toode saadetakse tarnija laost ja toimetatakse esmalt meie Soomes asuvasse lattu. Saate jälgimislingi e-posti teel, kui oleme teie tellimuse meie laost välja saatnud, tavaliselt 4–7 tööpäeva jooksul pärast tellimuse esitamist.
- Laost otsas Toode ei ole hetkel saadaval. Lisateabe saamiseks saatke palun sõnum meie klienditeenindusele.
Palun vaadake meie Saatmisviiside ja kulude leht lisateabe saamiseks.
Kas teil on küsimusi?
Eelistame, et saadaksite oma sõnumi meie reaalajas vestluse kaudu. Meiega vestluse kaudu ühendust võttes näeme toodet ja lehte, kus te hetkel olete, mis võimaldab meil kiiremini kontrollida toodet, mis teid huvitab.
Saame teid kohe aidata, kui oleme saadaval; kui oleme tellimusi pakkimas, võtame teiega ühendust e-posti ja reaalajas vestluse kaudu.
Kui teil on kiire, võite jätta oma sõnumi kontaktvormi kaudu.
Kas soovite esitada suurema hulgimüügikorralduse? Või soovite esitada hinnapäringu eritellimuse jaoks?
Päring hinnapakkumise saamiseks:
- Lisage kõik esemed ja kogused ostukorvi
- Mine ostukorvi lehele, klõpsates sellel lingil või klõpsa liuguri ostukorvis nupul "Võta meiega ühendust".
- Ostukorvi lehel saate klõpsata nupul "Võta meiega ühendust" ja saata sõnumi ning hinnapäringu oma ostukorvi toodete kohta.
Kirjeldus
Tooteinfo
Ancel BM700 OBD2 diagnostic scanner
With the Ancel BM700 in hand, you can forget about expensive service visits. This multifunctional diagnostic scanner was created with BMW, MINI and Rolls-Royce owners in mind, offering them exactly the same functions that until recently were reserved exclusively for workshops and authorized service centers. Thanks to the powerful OBD2 functionality and advanced diagnostics dedicated to BMW vehicles, you gain full control over the technical condition of your car - quickly, easily and without leaving your garage.
Diagnostics for all BMW systems
The Ancel BM700 combines the functions of a full system scanner and a classic OBD2 tester. This means you can diagnose all the vehicle's systems - from the engine, ABS, SRS, transmission, TPMS, ESP, SAS systems to the immobilizer and battery. The device allows you to read and clear fault codes, monitor vehicle performance in real time, I/M readiness test, fuel evaporation system (EVAP) test and access vehicle information (VIN, calibrations). For BMW, it works reliably with both modern models and older E30, E36 or E34 series vehicles.
Service functions in your garage
The BM700 allows you to do much more than read errors. The device offers an extensive set of service functions, such as resetting CBS inspection indicators, transmission and engine adaptations, throttle reset, fuel pump adjustment and registering a new battery. You can also regenerate the DPF filter, calibrate the steering angle sensor (SAS), reset ABS/DSC systems and code injectors. Importantly, you will perform all operations intuitively, thanks to a clear menu and an easy-to-read LCD screen.
OBD2 compatibility
Although the BM700 was designed with BMW vehicles in mind, the device will also work perfectly as a classic OBD2 scanner for other brands. Thanks to universal protocols, you can read engine faults, analyze data and monitor exhaust emissions on cars from other manufacturers as well - from Ford to Toyota. This makes the BM700 a multi-purpose tool that will work well in any workshop, garage and in the hands of any automotive enthusiast.
| Manufacturer | Ancel |
|---|---|
| Model | BM700 |
| Type of device | Diagnostic OBD2 scanner with full support for BMW systems |
| Compatibility | BMW, MINI, Rolls-Royce, OBD2 vehicles (engine) |
| Supported OBD2 functions | Error code reading, Error code clearing, I/M readiness test, Live data reading, EVAP system test, Vehicle information |
| Special functions for BMW | Engine, transmission, ABS, airbags and ESP diagnostics, Periodic inspection indicator reset, CBS (Condition Based Service) reset and correction, DME/DDE special functions, Battery registration (BMS), Steering angle sensor (SAS) calibration, Parking brake reset (EPB), Transmission adaptations (EGS), Fuel Pump reset, Injector Coding, ECU reset |
| Display | Backlit, graphic |
| Control | Function buttons |
| Power supply | 12V from OBD socket |
| Updates | Free, lifetime |
Warranty: 12 months
Ancel BM700 OBD2 diagnostic scanner
With the Ancel BM700 in hand, you can forget about expensive service visits. This multifunctional diagnostic scanner was created with BMW, MINI and Rolls-Royce owners in mind, offering them exactly the same functions that until recently were reserved exclusively for workshops and authorized service centers. Thanks to the powerful OBD2 functionality and advanced diagnostics dedicated to BMW vehicles, you gain full control over the technical condition of your car - quickly, easily and without leaving your garage.
Diagnostics for all BMW systems
The Ancel BM700 combines the functions of a full system scanner and a classic OBD2 tester. This means you can diagnose all the vehicle's systems - from the engine, ABS, SRS, transmission, TPMS, ESP, SAS systems to the immobilizer and battery. The device allows you to read and clear fault codes, monitor vehicle performance in real time, I/M readiness test, fuel evaporation system (EVAP) test and access vehicle information (VIN, calibrations). For BMW, it works reliably with both modern models and older E30, E36 or E34 series vehicles.
Service functions in your garage
The BM700 allows you to do much more than read errors. The device offers an extensive set of service functions, such as resetting CBS inspection indicators, transmission and engine adaptations, throttle reset, fuel pump adjustment and registering a new battery. You can also regenerate the DPF filter, calibrate the steering angle sensor (SAS), reset ABS/DSC systems and code injectors. Importantly, you will perform all operations intuitively, thanks to a clear menu and an easy-to-read LCD screen.
OBD2 compatibility
Although the BM700 was designed with BMW vehicles in mind, the device will also work perfectly as a classic OBD2 scanner for other brands. Thanks to universal protocols, you can read engine faults, analyze data and monitor exhaust emissions on cars from other manufacturers as well - from Ford to Toyota. This makes the BM700 a multi-purpose tool that will work well in any workshop, garage and in the hands of any automotive enthusiast.
| Manufacturer | Ancel |
|---|---|
| Model | BM700 |
| Type of device | Diagnostic OBD2 scanner with full support for BMW systems |
| Compatibility | BMW, MINI, Rolls-Royce, OBD2 vehicles (engine) |
| Supported OBD2 functions | Error code reading, Error code clearing, I/M readiness test, Live data reading, EVAP system test, Vehicle information |
| Special functions for BMW | Engine, transmission, ABS, airbags and ESP diagnostics, Periodic inspection indicator reset, CBS (Condition Based Service) reset and correction, DME/DDE special functions, Battery registration (BMS), Steering angle sensor (SAS) calibration, Parking brake reset (EPB), Transmission adaptations (EGS), Fuel Pump reset, Injector Coding, ECU reset |
| Display | Backlit, graphic |
| Control | Function buttons |
| Power supply | 12V from OBD socket |
| Updates | Free, lifetime |
Warranty: 12 months