RainPoint Rain Sensor
- Expédié aujourd'hui ! Le produit est en stock dans notre entrepôt situé en Finlande. Les commandes sont expédiées à une vitesse éclair, généralement le jour même ou le jour ouvrable suivant. Le délai de livraison dépend du pays de destination.
- Expédié sous 4 à 7 jours Le produit est expédié depuis l'entrepôt du fournisseur et livré d'abord à notre entrepôt situé en Finlande. Vous recevrez un lien de suivi par e-mail une fois que nous aurons expédié votre commande depuis notre entrepôt, généralement sous 4 à 7 jours ouvrables après votre commande.
- Rupture de stock Le produit est actuellement indisponible. Veuillez envoyer un message à notre service client pour plus d'informations.
Veuillez consulter notre Page des méthodes et coûts de livraison pour plus d'informations.
Avez-vous une question ?
Nous préférons que vous envoyiez votre message via notre chat en direct. Nous contacter par chat nous permet de voir le produit et la page où vous vous trouvez actuellement, ce qui nous permet de vérifier plus rapidement le produit qui vous intéresse.
Nous pouvons vous aider immédiatement si nous sommes disponibles, si nous sommes occupés à préparer des commandes, nous vous répondrons et vous contacterons par e-mail et chat en direct.
Si vous êtes pressé, vous pouvez laisser votre message avec le formulaire de contact.
Souhaitez-vous passer une commande en gros plus importante ? Ou souhaitez-vous demander un devis pour une commande personnalisée ?
Demande de devis :
- Ajoutez tous les articles et quantités dans le panier
- Allez à la "page du panier" en cliquant sur ce lien ou cliquez sur le bouton "Contactez-nous" dans le panier du slider.
- Sur la "page du panier", vous pouvez cliquer sur le bouton "Contactez-nous" et envoyer un message ainsi qu'une demande de devis pour les articles de votre panier.
Description
Informations sur le produit
RainPoint Rain Sensor
The RainPoint Rain Sensor is a practical solution for automatic irrigation systems. It works by using a mechanism that detects rainfall and automatically stops watering when it detects more than 3 mm of rainfall. This saves water, avoids overwatering your plants and ensures that the system works only when needed. The product is compatible with most controllers with solenoid valves and fits standard garden installations.
Effective operation based on rainfall
The sensor keeps the circuit closed until it detects a certain level of rainfall. When more than 3 mm of rain hits the sensor's surface, the water-absorbing plate expands, immediately breaking the circuit and stopping watering. Once the sensor dries out, the circuit closes again and the system returns to normal operation. The entire process takes 2 to 5 minutes, ensuring quick response to changing weather conditions.
Simple installation to irrigation controllers
Connecting the RainPoint sensor is intuitive - just plug one wire into the C (common) port and the other into the R (sensor) port on the controller. Thanks to its compatibility with most models of solenoid valves, there is no need for additional adapters or installation modifications.
Adjustable drying time
The sensor is equipped with a vent ring that allows you to adjust the time it takes to turn the system back on after rainfall. The wider-open vents speed up the drying process, which can be useful in sunny and windy locations. Under standard conditions, the sensor returns to operation after about 4 hours, and takes up to 3 days to dry completely.
Quick test without water
The function to test operation does not require contact with water. Just press the protrusion on top of the housing - if the connection is correct, there will be a characteristic "click" of the solenoid valve, and watering will stop. This is a quick way to verify the correctness of the installation.
| Manufacturer | RainPoint |
|---|---|
| Model | RS-Y01 |
| Power supply | 24 VAC (Volts Alternating Current) |
| Contact load capacity | 5 A |
| Cable length | 5 m |
| Conductor cross section | 0.5 mm² |
| Cable type | 2-core, in protective sheath |
| Compatibility | Compatible with most irrigation controllers (normally open and normally closed) |
| Dimensions | 16 × 6 cm |
Warranty: 36 months
RainPoint Rain Sensor
The RainPoint Rain Sensor is a practical solution for automatic irrigation systems. It works by using a mechanism that detects rainfall and automatically stops watering when it detects more than 3 mm of rainfall. This saves water, avoids overwatering your plants and ensures that the system works only when needed. The product is compatible with most controllers with solenoid valves and fits standard garden installations.
Effective operation based on rainfall
The sensor keeps the circuit closed until it detects a certain level of rainfall. When more than 3 mm of rain hits the sensor's surface, the water-absorbing plate expands, immediately breaking the circuit and stopping watering. Once the sensor dries out, the circuit closes again and the system returns to normal operation. The entire process takes 2 to 5 minutes, ensuring quick response to changing weather conditions.
Simple installation to irrigation controllers
Connecting the RainPoint sensor is intuitive - just plug one wire into the C (common) port and the other into the R (sensor) port on the controller. Thanks to its compatibility with most models of solenoid valves, there is no need for additional adapters or installation modifications.
Adjustable drying time
The sensor is equipped with a vent ring that allows you to adjust the time it takes to turn the system back on after rainfall. The wider-open vents speed up the drying process, which can be useful in sunny and windy locations. Under standard conditions, the sensor returns to operation after about 4 hours, and takes up to 3 days to dry completely.
Quick test without water
The function to test operation does not require contact with water. Just press the protrusion on top of the housing - if the connection is correct, there will be a characteristic "click" of the solenoid valve, and watering will stop. This is a quick way to verify the correctness of the installation.
| Manufacturer | RainPoint |
|---|---|
| Model | RS-Y01 |
| Power supply | 24 VAC (Volts Alternating Current) |
| Contact load capacity | 5 A |
| Cable length | 5 m |
| Conductor cross section | 0.5 mm² |
| Cable type | 2-core, in protective sheath |
| Compatibility | Compatible with most irrigation controllers (normally open and normally closed) |
| Dimensions | 16 × 6 cm |
Warranty: 36 months