ELEGOO PLA+ Filament (Orange)
- Seoltar inniu! Tá an táirge i stoc inár stóras atá lonnaithe sa Fhionlainn. Seoltar orduithe ar luas lasrach de ghnáth an lá céanna nó an lá gnó dar gcionn. Braitheann an t-am seachadta ar thír an cheann scríbe.
- Seoltar i 4–7 lá Seoltar an táirge ó stóras an soláthraí agus seachadtar é ar dtús chuig ár stóras atá lonnaithe sa Fhionlainn. Gheobhaidh tú nasc rianaithe trí ríomhphost nuair a bheidh do ordú seolta ónár stóras, de ghnáth laistigh de 4–7 lá gnó tar éis do ordaithe.
- As stoc Tá an táirge faoi láthair neamhsholáthraithe. Seol teachtaireacht le do thoil chuig ár seirbhís do chustaiméirí le haghaidh tuilleadh eolais.
Féach le do thoil ar ár Leathanach modhanna agus costais loingseoireachta le haghaidh tuilleadh eolais.
An bhfuil aon cheist agat?
Is fearr linn go seolann tú do theachtaireacht trí ár gcomhrá beo. Trí teagmháil a dhéanamh linn leis an gcomhrá tugann sé deis dúinn an táirge & an leathanach ina bhfuil tú faoi láthair a fheiceáil ionas go mbeidh sé níos tapúla dúinn an táirge atá suim agat a sheiceáil.
Is féidir linn cabhrú leat láithreach má táimid ar fáil, má táimid gnóthach ag pacáil orduithe fillfimid chugat agus teagmháil a dhéanamh leat trí ríomhphost & comhrá beo.
Mura bhfuil am agat is féidir leat do theachtaireacht a fhágáil leis an foirm teagmhála.
Ar mhaith leat ordú mórdhíola níos mó a chur? Nó ar mhaith leat iarratas a dhéanamh ar luachan d’ordú saincheaptha?
Iarratas ar luachan:
- Cuir na míreanna agus na cainníochtaí go léir sa chiseán
- Téigh go dtí an "Leathanach Cart" trí chliceáil ar an nasc seo nó cliceáil ar an gcnaipe "Déan Teagmháil Linn" sa chairt sleamhnáin.
- Ar an "Leathanach Cart" is féidir leat cliceáil ar an gcnaipe "Déan Teagmháil Linn" agus is féidir leat teachtaireacht agus iarratas luachana a sheoladh do na míreanna sa chiseán.
Cur síos
Eolas Táirge
ELEGOO PLA+ Filament (orange)
ELEGOO filament in orange is a great option for those looking for intense, well-saturated colors. The material has a smooth surface and provides high print detail, which works well for both prototypes and decorations. It is based on PLA+ (polylactide plus - a biodegradable material of plant origin, enriched with additives to increase durability). The spool contains 1 kg of filament.
Durability and precision
With increased resistance to cracking and better layer consistency, PLA+ is more durable than standard PLA, yet just as easy to print. A consistent diameter of 1.75 mm and dimensional precision of ± 0.02 mm guarantee smooth material feeding and less risk of blockages. Smooth surface and good heat conduction make even more complex models come out cleanly and without deformation.
Convenience and compatibility
The material is wound evenly and checked by hand, reducing the risk of tangles. The whole thing is vacuum-packed with a moisture absorber, so once opened you can start printing right away. The product fits most FDM (Fused Deposition Modeling - a 3D printing technology in which material is melted and applied in layers) printers that support 1.75mm filament.
General
| Manufacturer | ELEGOO |
|---|---|
| Model | 50.203.0073 |
| Color | Orange |
| Weight | 1 kg |
Recommended print settings
| Drying settings before printing | 55 ± 5°C |
|---|---|
| Ambient temperature and humidity | ≤ 50°C, ≤ 20% relative humidity (store with moisture absorber) |
| Nozzle temperature | 200 - 230°C |
| Table temperature (depending on printer and surface) | 35 - 65°C |
| Type of working surface | Textured PEI (polyetherimide - a durable material that holds prints well) or other compatible plates |
| Printing speed | Less than 280 mm/sec |
Physical properties
| Density | 1.30 g/cm³ |
|---|---|
| Melting point | 161°C |
| Deflection temperature under load | 56°C |
| Softening temperature (Vicat test) | 63°C |
Mechanical properties
| Tensile strength (XY - measurement made in the horizontal plane of the print, where the material is strongest) | 38 ± 2 MPa |
|---|---|
| Elongation at break (XY) | 7,9% ± 1,6% |
| Bending strength (XY) | 74 ± 4 MPa |
| Bending modulus (XY) | 2979 ± 156 MPa |
| Impact strength (XY) | 65.5 ± 3.6 kJ/m² |
Warranty: 12 months
ELEGOO PLA+ Filament (orange)
ELEGOO filament in orange is a great option for those looking for intense, well-saturated colors. The material has a smooth surface and provides high print detail, which works well for both prototypes and decorations. It is based on PLA+ (polylactide plus - a biodegradable material of plant origin, enriched with additives to increase durability). The spool contains 1 kg of filament.
Durability and precision
With increased resistance to cracking and better layer consistency, PLA+ is more durable than standard PLA, yet just as easy to print. A consistent diameter of 1.75 mm and dimensional precision of ± 0.02 mm guarantee smooth material feeding and less risk of blockages. Smooth surface and good heat conduction make even more complex models come out cleanly and without deformation.
Convenience and compatibility
The material is wound evenly and checked by hand, reducing the risk of tangles. The whole thing is vacuum-packed with a moisture absorber, so once opened you can start printing right away. The product fits most FDM (Fused Deposition Modeling - a 3D printing technology in which material is melted and applied in layers) printers that support 1.75mm filament.
General
| Manufacturer | ELEGOO |
|---|---|
| Model | 50.203.0073 |
| Color | Orange |
| Weight | 1 kg |
Recommended print settings
| Drying settings before printing | 55 ± 5°C |
|---|---|
| Ambient temperature and humidity | ≤ 50°C, ≤ 20% relative humidity (store with moisture absorber) |
| Nozzle temperature | 200 - 230°C |
| Table temperature (depending on printer and surface) | 35 - 65°C |
| Type of working surface | Textured PEI (polyetherimide - a durable material that holds prints well) or other compatible plates |
| Printing speed | Less than 280 mm/sec |
Physical properties
| Density | 1.30 g/cm³ |
|---|---|
| Melting point | 161°C |
| Deflection temperature under load | 56°C |
| Softening temperature (Vicat test) | 63°C |
Mechanical properties
| Tensile strength (XY - measurement made in the horizontal plane of the print, where the material is strongest) | 38 ± 2 MPa |
|---|---|
| Elongation at break (XY) | 7,9% ± 1,6% |
| Bending strength (XY) | 74 ± 4 MPa |
| Bending modulus (XY) | 2979 ± 156 MPa |
| Impact strength (XY) | 65.5 ± 3.6 kJ/m² |
Warranty: 12 months