Jack Puluz tie microphone with clip PU426 1.5m 3.5mm Lightning
- Seoltar inniu! Tá an táirge i stoc inár stóras atá lonnaithe sa Fhionlainn. Seoltar orduithe ar luas lasrach de ghnáth an lá céanna nó an lá gnó dar gcionn. Braitheann an t-am seachadta ar thír an cheann scríbe.
- Seoltar i 4–7 lá Seoltar an táirge ó stóras an soláthraí agus seachadtar é ar dtús chuig ár stóras atá lonnaithe sa Fhionlainn. Gheobhaidh tú nasc rianaithe trí ríomhphost nuair a bheidh do ordú seolta ónár stóras, de ghnáth laistigh de 4–7 lá gnó tar éis do ordaithe.
- As stoc Tá an táirge faoi láthair neamhsholáthraithe. Seol teachtaireacht le do thoil chuig ár seirbhís do chustaiméirí le haghaidh tuilleadh eolais.
Féach le do thoil ar ár Leathanach modhanna agus costais loingseoireachta le haghaidh tuilleadh eolais.
An bhfuil aon cheist agat?
Is fearr linn go seolann tú do theachtaireacht trí ár gcomhrá beo. Trí teagmháil a dhéanamh linn leis an gcomhrá tugann sé deis dúinn an táirge & an leathanach ina bhfuil tú faoi láthair a fheiceáil ionas go mbeidh sé níos tapúla dúinn an táirge atá suim agat a sheiceáil.
Is féidir linn cabhrú leat láithreach má táimid ar fáil, má táimid gnóthach ag pacáil orduithe fillfimid chugat agus teagmháil a dhéanamh leat trí ríomhphost & comhrá beo.
Mura bhfuil am agat is féidir leat do theachtaireacht a fhágáil leis an foirm teagmhála.
Ar mhaith leat ordú mórdhíola níos mó a chur? Nó ar mhaith leat iarratas a dhéanamh ar luachan d’ordú saincheaptha?
Iarratas ar luachan:
- Cuir na míreanna agus na cainníochtaí go léir sa chiseán
- Téigh go dtí an "Leathanach Cart" trí chliceáil ar an nasc seo nó cliceáil ar an gcnaipe "Déan Teagmháil Linn" sa chairt sleamhnáin.
- Ar an "Leathanach Cart" is féidir leat cliceáil ar an gcnaipe "Déan Teagmháil Linn" agus is féidir leat teachtaireacht agus iarratas luachana a sheoladh do na míreanna sa chiseán.
Cur síos
Eolas Táirge
Puluz tie microphone with clip PU426 1.5m 3.5mm Lightning
Puluz PU426 is a compact tie microphone with Lightning connector, which is great for recording interviews, podcasts, videos or online lessons. Thanks to the length of the 1.5-meter cable, you can operate the device freely, and the practical clip allows you to attach the microphone directly to your clothes. It's a versatile tool that works without additional batteries and works with iPhones and other devices with a Lightning port.
Clear sound and effective noise reduction
The PU426 uses active sound recording technology and a capacitive transducer to provide clear and natural sound. The built-in noise cancellation module minimizes ambient noise, making your voice sound clear even in less favorable conditions. The microphone captures audio at 360° and works best at a distance of up to 20 cm from the source - ideal, for example, for close-up recordings such as vlogs and interviews.
Durable construction and a set of accessories
The PU426 is made of durable materials - the PVC used and the shielded enamel cable provide resistance to damage and interference. In the set you will find a set of necessary accessories: two clips, two sponge covers and one deadcat wind shield, so that the microphone can also cope in the field. The whole set is packed in a handy carrying case, making it easy to transport and store the equipment.
Included
- Puluz PU426 microphone × 1
- Deadcat wind shield × 1
- Sponge cover × 2
- Attachment clip × 2
- Storage case × 1
| Manufacturer | Puluz |
|---|---|
| Manufacturer code | PU426 |
| Microphone type | Electret condenser microphone |
| Transducer size | 6.0 × 2.7 mm |
| Directional characteristics | Omnidirectional (dual capacitance) |
| Sensitivity | -34 dB ± 3 dB (0 dB = 1 Pa) |
| Frequency range | 20 Hz - 16,000 Hz |
| Signal-to-noise ratio | >60 dB SPL |
| Impedance | <2.2 kΩ |
| Cable length | 1,5 m |
| Connector type | Lightning (8 Pin) |
| Cable material | PVC, shielded enamel cable |
Warranty: 12 months
Puluz tie microphone with clip PU426 1.5m 3.5mm Lightning
Puluz PU426 is a compact tie microphone with Lightning connector, which is great for recording interviews, podcasts, videos or online lessons. Thanks to the length of the 1.5-meter cable, you can operate the device freely, and the practical clip allows you to attach the microphone directly to your clothes. It's a versatile tool that works without additional batteries and works with iPhones and other devices with a Lightning port.
Clear sound and effective noise reduction
The PU426 uses active sound recording technology and a capacitive transducer to provide clear and natural sound. The built-in noise cancellation module minimizes ambient noise, making your voice sound clear even in less favorable conditions. The microphone captures audio at 360° and works best at a distance of up to 20 cm from the source - ideal, for example, for close-up recordings such as vlogs and interviews.
Durable construction and a set of accessories
The PU426 is made of durable materials - the PVC used and the shielded enamel cable provide resistance to damage and interference. In the set you will find a set of necessary accessories: two clips, two sponge covers and one deadcat wind shield, so that the microphone can also cope in the field. The whole set is packed in a handy carrying case, making it easy to transport and store the equipment.
Included
- Puluz PU426 microphone × 1
- Deadcat wind shield × 1
- Sponge cover × 2
- Attachment clip × 2
- Storage case × 1
| Manufacturer | Puluz |
|---|---|
| Manufacturer code | PU426 |
| Microphone type | Electret condenser microphone |
| Transducer size | 6.0 × 2.7 mm |
| Directional characteristics | Omnidirectional (dual capacitance) |
| Sensitivity | -34 dB ± 3 dB (0 dB = 1 Pa) |
| Frequency range | 20 Hz - 16,000 Hz |
| Signal-to-noise ratio | >60 dB SPL |
| Impedance | <2.2 kΩ |
| Cable length | 1,5 m |
| Connector type | Lightning (8 Pin) |
| Cable material | PVC, shielded enamel cable |
Warranty: 12 months