RainPoint Rain Sensor
- Seoltar inniu! Tá an táirge i stoc inár stóras atá lonnaithe sa Fhionlainn. Seoltar orduithe ar luas lasrach de ghnáth an lá céanna nó an lá gnó dar gcionn. Braitheann an t-am seachadta ar thír an cheann scríbe.
- Seoltar i 4–7 lá Seoltar an táirge ó stóras an soláthraí agus seachadtar é ar dtús chuig ár stóras atá lonnaithe sa Fhionlainn. Gheobhaidh tú nasc rianaithe trí ríomhphost nuair a bheidh do ordú seolta ónár stóras, de ghnáth laistigh de 4–7 lá gnó tar éis do ordaithe.
- As stoc Tá an táirge faoi láthair neamhsholáthraithe. Seol teachtaireacht le do thoil chuig ár seirbhís do chustaiméirí le haghaidh tuilleadh eolais.
Féach le do thoil ar ár Leathanach modhanna agus costais loingseoireachta le haghaidh tuilleadh eolais.
An bhfuil aon cheist agat?
Is fearr linn go seolann tú do theachtaireacht trí ár gcomhrá beo. Trí teagmháil a dhéanamh linn leis an gcomhrá tugann sé deis dúinn an táirge & an leathanach ina bhfuil tú faoi láthair a fheiceáil ionas go mbeidh sé níos tapúla dúinn an táirge atá suim agat a sheiceáil.
Is féidir linn cabhrú leat láithreach má táimid ar fáil, má táimid gnóthach ag pacáil orduithe fillfimid chugat agus teagmháil a dhéanamh leat trí ríomhphost & comhrá beo.
Mura bhfuil am agat is féidir leat do theachtaireacht a fhágáil leis an foirm teagmhála.
Ar mhaith leat ordú mórdhíola níos mó a chur? Nó ar mhaith leat iarratas a dhéanamh ar luachan d’ordú saincheaptha?
Iarratas ar luachan:
- Cuir na míreanna agus na cainníochtaí go léir sa chiseán
- Téigh go dtí an "Leathanach Cart" trí chliceáil ar an nasc seo nó cliceáil ar an gcnaipe "Déan Teagmháil Linn" sa chairt sleamhnáin.
- Ar an "Leathanach Cart" is féidir leat cliceáil ar an gcnaipe "Déan Teagmháil Linn" agus is féidir leat teachtaireacht agus iarratas luachana a sheoladh do na míreanna sa chiseán.
Cur síos
Eolas Táirge
RainPoint Rain Sensor
The RainPoint Rain Sensor is a practical solution for automatic irrigation systems. It works by using a mechanism that detects rainfall and automatically stops watering when it detects more than 3 mm of rainfall. This saves water, avoids overwatering your plants and ensures that the system works only when needed. The product is compatible with most controllers with solenoid valves and fits standard garden installations.
Effective operation based on rainfall
The sensor keeps the circuit closed until it detects a certain level of rainfall. When more than 3 mm of rain hits the sensor's surface, the water-absorbing plate expands, immediately breaking the circuit and stopping watering. Once the sensor dries out, the circuit closes again and the system returns to normal operation. The entire process takes 2 to 5 minutes, ensuring quick response to changing weather conditions.
Simple installation to irrigation controllers
Connecting the RainPoint sensor is intuitive - just plug one wire into the C (common) port and the other into the R (sensor) port on the controller. Thanks to its compatibility with most models of solenoid valves, there is no need for additional adapters or installation modifications.
Adjustable drying time
The sensor is equipped with a vent ring that allows you to adjust the time it takes to turn the system back on after rainfall. The wider-open vents speed up the drying process, which can be useful in sunny and windy locations. Under standard conditions, the sensor returns to operation after about 4 hours, and takes up to 3 days to dry completely.
Quick test without water
The function to test operation does not require contact with water. Just press the protrusion on top of the housing - if the connection is correct, there will be a characteristic "click" of the solenoid valve, and watering will stop. This is a quick way to verify the correctness of the installation.
| Manufacturer | RainPoint |
|---|---|
| Model | RS-Y01 |
| Power supply | 24 VAC (Volts Alternating Current) |
| Contact load capacity | 5 A |
| Cable length | 5 m |
| Conductor cross section | 0.5 mm² |
| Cable type | 2-core, in protective sheath |
| Compatibility | Compatible with most irrigation controllers (normally open and normally closed) |
| Dimensions | 16 × 6 cm |
Warranty: 36 months
RainPoint Rain Sensor
The RainPoint Rain Sensor is a practical solution for automatic irrigation systems. It works by using a mechanism that detects rainfall and automatically stops watering when it detects more than 3 mm of rainfall. This saves water, avoids overwatering your plants and ensures that the system works only when needed. The product is compatible with most controllers with solenoid valves and fits standard garden installations.
Effective operation based on rainfall
The sensor keeps the circuit closed until it detects a certain level of rainfall. When more than 3 mm of rain hits the sensor's surface, the water-absorbing plate expands, immediately breaking the circuit and stopping watering. Once the sensor dries out, the circuit closes again and the system returns to normal operation. The entire process takes 2 to 5 minutes, ensuring quick response to changing weather conditions.
Simple installation to irrigation controllers
Connecting the RainPoint sensor is intuitive - just plug one wire into the C (common) port and the other into the R (sensor) port on the controller. Thanks to its compatibility with most models of solenoid valves, there is no need for additional adapters or installation modifications.
Adjustable drying time
The sensor is equipped with a vent ring that allows you to adjust the time it takes to turn the system back on after rainfall. The wider-open vents speed up the drying process, which can be useful in sunny and windy locations. Under standard conditions, the sensor returns to operation after about 4 hours, and takes up to 3 days to dry completely.
Quick test without water
The function to test operation does not require contact with water. Just press the protrusion on top of the housing - if the connection is correct, there will be a characteristic "click" of the solenoid valve, and watering will stop. This is a quick way to verify the correctness of the installation.
| Manufacturer | RainPoint |
|---|---|
| Model | RS-Y01 |
| Power supply | 24 VAC (Volts Alternating Current) |
| Contact load capacity | 5 A |
| Cable length | 5 m |
| Conductor cross section | 0.5 mm² |
| Cable type | 2-core, in protective sheath |
| Compatibility | Compatible with most irrigation controllers (normally open and normally closed) |
| Dimensions | 16 × 6 cm |
Warranty: 36 months