Ancel PB600 circuit tester
- Otprema danas! Proizvod je na skladištu u našem skladištu u Finskoj. Narudžbe se šalju munjevitom brzinom, obično isti ili sljedeći radni dan. Vrijeme dostave ovisi o zemlji odredišta.
- Otprema u roku od 4–7 dana Proizvod se šalje iz skladišta dobavljača i prvo se dostavlja u naše skladište u Finskoj. Dobit ćete poveznicu za praćenje putem e-pošte čim pošaljemo vašu narudžbu iz našeg skladišta, obično unutar 4–7 radnih dana nakon vaše narudžbe.
- Nema na skladištu Proizvod trenutno nije dostupan. Za više informacija pošaljite poruku našoj korisničkoj službi.
Molimo pogledajte našu Stranica s metodama i troškovima dostave za više informacija.
Imate li kakvo pitanje?
Preferiramo da nam pošaljete poruku putem našeg live chata. Kontaktiranjem putem chata omogućuje nam da vidimo proizvod i stranicu na kojoj se trenutno nalazite, što će nam ubrzati provjeru proizvoda za koji ste zainteresirani.
Možemo vam odmah pomoći ako smo dostupni, ako smo zauzeti pakiranjem narudžbi, javit ćemo vam se i kontaktirati vas putem e-pošte i live chata.
Ako ste u žurbi, možete ostaviti svoju poruku putem kontakt obrasca.
Želite li napraviti veću veleprodajnu narudžbu? Ili želite zatražiti ponudu za prilagođenu narudžbu?
Zahtjev za ponudu:
- Dodajte sve artikle i količine u košaricu
- Idite na "Stranicu košarice" klikom na ovaj link ili kliknite na gumb "Kontaktirajte nas" u klizaču košarice.
- Na "stranici košarice" možete kliknuti na gumb "Kontaktirajte nas" i poslati poruku te zahtjev za ponudu za artikle u košarici.
Opis
Informacije o proizvodu
Ancel PB600 circuit tester
The Ancel PB600 is a powerful circuit tester designed for vehicles with 12-24V installations. The device offers 8 diagnostic modes, including AC/DC voltage, frequency, injector, duty cycle, and diode and continuity tests. The 2.4" TFT color screen allows precise parameter tracking and real-time viewing of signal waveforms.
Real-time testing
A major advantage of the Ancel PB600 is its ability to measure battery voltage and probe tip voltage simultaneously. The tester Shows this data on a clear display, and the user can switch between digital and waveform modes, which makes it easier to detect voltage irregularities in the installation. This will help you detect short circuits, interruptions or power supply instabilities faster.
Multiple measurement modes
The Ancel PB600 tester offers measurements of DC voltage (up to 110 V) and AC voltage (up to 200 V), frequency (up to 1 MHz), resistance, diodes, and relay and injector test modes. It supports supply voltages from 6 to 35 volts, allowing universal application in cars, trucks, motorcycles, boats or snowmobiles. The measurement range and functionality are suitable for both quick service tests and more complex diagnostics.
Direct wire testing
The use of a sharp probe tip with LED illumination allows spot testing of wires without the need to remove or cut them. The PB600 can detect broken wires, weak ground, short circuits and discontinuities in a circuit. This significantly reduces work time in locating faults. Component activation and lighting trailer test functions further expand the device's capabilities.
Signal simulation and analysis
The device generates AC voltage signals, which allows you to test the response of consumer circuits under near-real conditions. You can observe voltage, frequency and duty cycle graphs on the screen in real time. This makes it easier to assess whether an electrical component is operating within the correct parameters.
Robust equipment and easy operation
The tester comes with a full set of test leads, probe tips, relay test leads and a transport box. The unit is operated via an ergonomic panel with directional buttons. The menu is available in English, and software updates are free and for life.
Included:
- Circuit tester
- Extension cable with test needle
- Test probe extender
- Cable with battery clip
- Test needle
- Relay test cable
- Relay test cable
- Short probe tip
- Long probe tip
- Carrying case
- User manual
| Manufacturer | Ancel |
|---|---|
| Model | PB600 |
| Display | 2.4 inch TFT (320×240 DPI) |
| DC voltage measurement | -110 V to +110 V |
| AC voltage measurement | up to ±200 V |
| Power supply | DC 8 V TO 35 V |
| Injector test | Voltage 0-180 V, time 0-25 ms |
| Frequency measurement | yes (range 0-1 MHz) |
| Supported languages | English |
| Updates | lifetime, free of charge |
Warranty: 12 months
Ancel PB600 circuit tester
The Ancel PB600 is a powerful circuit tester designed for vehicles with 12-24V installations. The device offers 8 diagnostic modes, including AC/DC voltage, frequency, injector, duty cycle, and diode and continuity tests. The 2.4" TFT color screen allows precise parameter tracking and real-time viewing of signal waveforms.
Real-time testing
A major advantage of the Ancel PB600 is its ability to measure battery voltage and probe tip voltage simultaneously. The tester Shows this data on a clear display, and the user can switch between digital and waveform modes, which makes it easier to detect voltage irregularities in the installation. This will help you detect short circuits, interruptions or power supply instabilities faster.
Multiple measurement modes
The Ancel PB600 tester offers measurements of DC voltage (up to 110 V) and AC voltage (up to 200 V), frequency (up to 1 MHz), resistance, diodes, and relay and injector test modes. It supports supply voltages from 6 to 35 volts, allowing universal application in cars, trucks, motorcycles, boats or snowmobiles. The measurement range and functionality are suitable for both quick service tests and more complex diagnostics.
Direct wire testing
The use of a sharp probe tip with LED illumination allows spot testing of wires without the need to remove or cut them. The PB600 can detect broken wires, weak ground, short circuits and discontinuities in a circuit. This significantly reduces work time in locating faults. Component activation and lighting trailer test functions further expand the device's capabilities.
Signal simulation and analysis
The device generates AC voltage signals, which allows you to test the response of consumer circuits under near-real conditions. You can observe voltage, frequency and duty cycle graphs on the screen in real time. This makes it easier to assess whether an electrical component is operating within the correct parameters.
Robust equipment and easy operation
The tester comes with a full set of test leads, probe tips, relay test leads and a transport box. The unit is operated via an ergonomic panel with directional buttons. The menu is available in English, and software updates are free and for life.
Included:
- Circuit tester
- Extension cable with test needle
- Test probe extender
- Cable with battery clip
- Test needle
- Relay test cable
- Relay test cable
- Short probe tip
- Long probe tip
- Carrying case
- User manual
| Manufacturer | Ancel |
|---|---|
| Model | PB600 |
| Display | 2.4 inch TFT (320×240 DPI) |
| DC voltage measurement | -110 V to +110 V |
| AC voltage measurement | up to ±200 V |
| Power supply | DC 8 V TO 35 V |
| Injector test | Voltage 0-180 V, time 0-25 ms |
| Frequency measurement | yes (range 0-1 MHz) |
| Supported languages | English |
| Updates | lifetime, free of charge |
Warranty: 12 months