Anycubic High Speed PLA Filament 1 KG (black)
- Ma szállítjuk! A termék raktáron van a finnországi raktárunkban. A rendeléseket villámgyorsan, általában még aznap vagy a következő munkanapon szállítjuk ki. A szállítási idő a célországtól függ.
- Szállítás 4–7 napon belül A terméket a beszállító raktárából szállítjuk, és először a finnországi raktárunkba érkezik. A rendelésünk kiszállítása után, általában 4–7 munkanapon belül, e-mailben kap egy nyomkövetési linket.
- Raktáron nincs A termék jelenleg nem elérhető. Kérjük, küldjön üzenetet ügyfélszolgálatunknak további információkért.
Kérjük, tekintse meg Szállítási módok és költségek oldala további információkért.
Van kérdése?
Jobban szeretjük, ha üzenetét élő csevegésünkön keresztül küldi el. A csevegésen keresztüli kapcsolatfelvétel lehetővé teszi számunkra, hogy lássuk az adott terméket és oldalt, ahol éppen tartózkodik, így gyorsabban tudjuk ellenőrizni az Ön által érdeklődött terméket.
Azonnal segíthetünk, ha elérhetőek vagyunk, ha éppen megrendeléseket csomagolunk, visszajelzünk és e-mailben vagy élő csevegésen keresztül felvesszük Önnel a kapcsolatot.
Ha siet, üzenetét a kapcsolati űrlapon keresztül is elküldheti.
Szeretne nagyobb nagykereskedelmi rendelést leadni? Vagy egyedi rendeléshez szeretne árajánlatot kérni?
Árajánlatkérés:
- Adja hozzá az összes terméket és mennyiséget a kosárhoz
- Lépjen a "Kosár oldalra" erre a linkre kattintva vagy kattintson a "Kapcsolat" gombra a csúszka kosárban.
- A "Kosár oldalán" kattintson a "Kapcsolat" gombra, és üzenetet, valamint árajánlatkérést küldhet a kosárban lévő termékekre.
Leírás
Termékinformáció
Anycubic High Speed PLA Filament 1 KG (Black).
Meet High Speed PLA filament from Anycubic, designed for lightning-fast 3D printing. Thanks to an innovative core optimized for high speeds, the material allows you to print at speeds of up to 500 mm/s, which, when combined with a compatible printer, can give you up to ten times the speed of standard designs. Don't sacrifice quality - finished models maintain precise edges and crisp details, even with the most elaborate structures.
Smoothness and precision of each layer
The secret to flawless prints is the optimized composition of PLA (polylactide, is one of the most popular materials used for 3D printing), which ensures exceptional smoothness of the filament feed and instant cooling of each applied layer. The filament flows evenly through the nozzle, and rapid solidification prevents deformation. In addition, Anycubic filament guarantees printing precision of ±0.02mm. The result is perfectly smoothed surfaces and sharply rendered parts, even for complex details or shapes.
Seamless print run
When working with Anycubic filament, you don't have to worry about downtime or blockages. The fiber's constant diameter and stable structure guarantee the continuity of the material, eliminating the risk of shortages or clustering inside the print head. This ensures that every print runs smoothly - from the first layer to the last.
Versatile compatibility
Whether you're using a modern, high-speed printer or a classic model, Anycubic filament will fit your needs. The uniform, seamless structure with controlled diameter tolerance makes the material completely tangle-resistant and ready to work in any device on the market.
Safe use
To maintain consistent quality and avoid possible blockages, remember to heat the printer head to at least 230 °C before installing the filament. This will ensure that the material will flow without hindrance, giving you peace of mind and smoothness during any, even the most intensive printing.
General
| Manufacturer | Anycubic |
|---|---|
| Model | IPHHSBW-106 |
| Color | Black |
| Material | PLA |
| Dimensions | 1.75 mm |
| Weight | 1 kg |
| Volume | 1.26 g/cm³ |
| Elongation at break | 12% |
| Melting point of the filament | 165℃ |
| Heat distortion temperature | 56℃ |
| Accuracy | ±0.02mm |
| Length | 330 m |
| Tensile strength | 54MPa |
| Bending strength | 74MPa |
| Izod impact strength | 46J/m |
| Melting index | 4-69/10min |
| Storage environment | Dry and ventilated |
Recommended printer parameters
| Nozzle temperature | 190-210°C (50-150mm/s) | 210-230°C (150-300mm/s) | 230-260°C (300-600mm/s) |
|---|---|
| Printer platform material | Fine magnetic sticker |
| Surface treatment of the printing platform | Not required |
| Printer platform temperature | 50-60°C |
| Cooling fan | 100% |
| Printing speed | 40-250mm/sec |
| Pull-in speed | 50mm/sec |
| Recommended material | PVA |
| Drying temperature | 50°C |
Warranty: 24 months
Anycubic High Speed PLA Filament 1 KG (Black).
Meet High Speed PLA filament from Anycubic, designed for lightning-fast 3D printing. Thanks to an innovative core optimized for high speeds, the material allows you to print at speeds of up to 500 mm/s, which, when combined with a compatible printer, can give you up to ten times the speed of standard designs. Don't sacrifice quality - finished models maintain precise edges and crisp details, even with the most elaborate structures.
Smoothness and precision of each layer
The secret to flawless prints is the optimized composition of PLA (polylactide, is one of the most popular materials used for 3D printing), which ensures exceptional smoothness of the filament feed and instant cooling of each applied layer. The filament flows evenly through the nozzle, and rapid solidification prevents deformation. In addition, Anycubic filament guarantees printing precision of ±0.02mm. The result is perfectly smoothed surfaces and sharply rendered parts, even for complex details or shapes.
Seamless print run
When working with Anycubic filament, you don't have to worry about downtime or blockages. The fiber's constant diameter and stable structure guarantee the continuity of the material, eliminating the risk of shortages or clustering inside the print head. This ensures that every print runs smoothly - from the first layer to the last.
Versatile compatibility
Whether you're using a modern, high-speed printer or a classic model, Anycubic filament will fit your needs. The uniform, seamless structure with controlled diameter tolerance makes the material completely tangle-resistant and ready to work in any device on the market.
Safe use
To maintain consistent quality and avoid possible blockages, remember to heat the printer head to at least 230 °C before installing the filament. This will ensure that the material will flow without hindrance, giving you peace of mind and smoothness during any, even the most intensive printing.
General
| Manufacturer | Anycubic |
|---|---|
| Model | IPHHSBW-106 |
| Color | Black |
| Material | PLA |
| Dimensions | 1.75 mm |
| Weight | 1 kg |
| Volume | 1.26 g/cm³ |
| Elongation at break | 12% |
| Melting point of the filament | 165℃ |
| Heat distortion temperature | 56℃ |
| Accuracy | ±0.02mm |
| Length | 330 m |
| Tensile strength | 54MPa |
| Bending strength | 74MPa |
| Izod impact strength | 46J/m |
| Melting index | 4-69/10min |
| Storage environment | Dry and ventilated |
Recommended printer parameters
| Nozzle temperature | 190-210°C (50-150mm/s) | 210-230°C (150-300mm/s) | 230-260°C (300-600mm/s) |
|---|---|
| Printer platform material | Fine magnetic sticker |
| Surface treatment of the printing platform | Not required |
| Printer platform temperature | 50-60°C |
| Cooling fan | 100% |
| Printing speed | 40-250mm/sec |
| Pull-in speed | 50mm/sec |
| Recommended material | PVA |
| Drying temperature | 50°C |
Warranty: 24 months