FNIRSI index humidity meter WMT-10 hygrometer
- Ma szállítjuk! A termék raktáron van a finnországi raktárunkban. A rendeléseket villámgyorsan, általában még aznap vagy a következő munkanapon szállítjuk ki. A szállítási idő a célországtól függ.
- Szállítás 4–7 napon belül A terméket a beszállító raktárából szállítjuk, és először a finnországi raktárunkba érkezik. A rendelésünk kiszállítása után, általában 4–7 munkanapon belül, e-mailben kap egy nyomkövetési linket.
- Raktáron nincs A termék jelenleg nem elérhető. Kérjük, küldjön üzenetet ügyfélszolgálatunknak további információkért.
Kérjük, tekintse meg Szállítási módok és költségek oldala további információkért.
Van kérdése?
Jobban szeretjük, ha üzenetét élő csevegésünkön keresztül küldi el. A csevegésen keresztüli kapcsolatfelvétel lehetővé teszi számunkra, hogy lássuk az adott terméket és oldalt, ahol éppen tartózkodik, így gyorsabban tudjuk ellenőrizni az Ön által érdeklődött terméket.
Azonnal segíthetünk, ha elérhetőek vagyunk, ha éppen megrendeléseket csomagolunk, visszajelzünk és e-mailben vagy élő csevegésen keresztül felvesszük Önnel a kapcsolatot.
Ha siet, üzenetét a kapcsolati űrlapon keresztül is elküldheti.
Szeretne nagyobb nagykereskedelmi rendelést leadni? Vagy egyedi rendeléshez szeretne árajánlatot kérni?
Árajánlatkérés:
- Adja hozzá az összes terméket és mennyiséget a kosárhoz
- Lépjen a "Kosár oldalra" erre a linkre kattintva vagy kattintson a "Kapcsolat" gombra a csúszka kosárban.
- A "Kosár oldalán" kattintson a "Kapcsolat" gombra, és üzenetet, valamint árajánlatkérést küldhet a kosárban lévő termékekre.
Leírás
Termékinformáció
FNIRSI WMT-10 indicative moisture meter hygrometer
The FNIRSI WMT-10 is an advanced, non-invasive moisture meter that provides fast and accurate readings without puncturing surfaces. Thanks to its induction technology and four measurement modes, it will work well with wood, as well as for testing walls, floors or building materials. High resolution (0.1%) and a wide measurement range of up to 75% allow precise results in just seconds. The large 2.4" TFT color screen ensures readability even in dark rooms, and the built-in flashlight further supports work in difficult conditions.
Measurement on any surface - 4 modes of operation
The WMT-10 offers four dedicated modes, including Softwood Mode for softwood (beech, spruce, birch, cherry, etc.), Hardwood Mode for hardwood (teak, walnut, ash, oak, etc.), Masonry Mode for masonry surfaces (brick, stone, compacted ground), and Powdered Wall Mode for plaster and concrete (lime walls, ceilings, floors). Each mode has been programmed with a corresponding measurement range - up to 75% moisture at a measurement depth of 17 mm.
Advanced measurement functions
The meter features a highly sensitive electromagnetic wave sensor and an extra-wide 40.5 × 40.5 cm measuring panel. The device offers light and audible alarms when the limits are exceeded, a HOLD function to stop the reading, and memory for up to 30 measurements. This allows you to easily compare results and return to previous readings at any time.
Durable design and convenient operation
The FNIRSI WMT-10 is not only about functionality, but also about refined ergonomics. The case with a non-slip finish and silicone coating fits well in the hand, and the soft plastic buttons make it easy to operate. The built-in 1,000 mAh battery with USB-C charging ensures long use and can be set to automatically turn off after 5, 10 or 15 minutes. The compact size makes the meter easy to fit in a tool bag.
Versatile applications
The FNIRSI WMT-10 will prove useful for measuring the moisture content of wood, paper, plaster, cement, plaster, concrete or brick. It is an indispensable tool for professionals in the construction, renovation, carpentry and finishing trades - anywhere where accuracy of measurement and not disturbing the surface under test are crucial.
The set includes
- moisture meter
- Type-C cable
- user manual
| Manufacturer | FNIRSI |
|---|---|
| Model | WMT-10 |
| Display | 2.4-inch color TFT screen |
| Screen resolution | 0.1% |
| Maximum detection depth | 17 mm |
| Sensor dimensions | 40.5 x 40.5 mm |
| Working temperature | 0~40°C |
| Measurement range | Gypsum wall: 0-25%, brick wall: 0-43%, soft wood: 0-75%, hard wood: 0-75% |
| Maximum measurement range | 0-75% |
| Error range | ±1.5% |
| Power source | Lithium rechargeable battery with 1000 mAh capacity |
Warranty: 24 months
FNIRSI WMT-10 indicative moisture meter hygrometer
The FNIRSI WMT-10 is an advanced, non-invasive moisture meter that provides fast and accurate readings without puncturing surfaces. Thanks to its induction technology and four measurement modes, it will work well with wood, as well as for testing walls, floors or building materials. High resolution (0.1%) and a wide measurement range of up to 75% allow precise results in just seconds. The large 2.4" TFT color screen ensures readability even in dark rooms, and the built-in flashlight further supports work in difficult conditions.
Measurement on any surface - 4 modes of operation
The WMT-10 offers four dedicated modes, including Softwood Mode for softwood (beech, spruce, birch, cherry, etc.), Hardwood Mode for hardwood (teak, walnut, ash, oak, etc.), Masonry Mode for masonry surfaces (brick, stone, compacted ground), and Powdered Wall Mode for plaster and concrete (lime walls, ceilings, floors). Each mode has been programmed with a corresponding measurement range - up to 75% moisture at a measurement depth of 17 mm.
Advanced measurement functions
The meter features a highly sensitive electromagnetic wave sensor and an extra-wide 40.5 × 40.5 cm measuring panel. The device offers light and audible alarms when the limits are exceeded, a HOLD function to stop the reading, and memory for up to 30 measurements. This allows you to easily compare results and return to previous readings at any time.
Durable design and convenient operation
The FNIRSI WMT-10 is not only about functionality, but also about refined ergonomics. The case with a non-slip finish and silicone coating fits well in the hand, and the soft plastic buttons make it easy to operate. The built-in 1,000 mAh battery with USB-C charging ensures long use and can be set to automatically turn off after 5, 10 or 15 minutes. The compact size makes the meter easy to fit in a tool bag.
Versatile applications
The FNIRSI WMT-10 will prove useful for measuring the moisture content of wood, paper, plaster, cement, plaster, concrete or brick. It is an indispensable tool for professionals in the construction, renovation, carpentry and finishing trades - anywhere where accuracy of measurement and not disturbing the surface under test are crucial.
The set includes
- moisture meter
- Type-C cable
- user manual
| Manufacturer | FNIRSI |
|---|---|
| Model | WMT-10 |
| Display | 2.4-inch color TFT screen |
| Screen resolution | 0.1% |
| Maximum detection depth | 17 mm |
| Sensor dimensions | 40.5 x 40.5 mm |
| Working temperature | 0~40°C |
| Measurement range | Gypsum wall: 0-25%, brick wall: 0-43%, soft wood: 0-75%, hard wood: 0-75% |
| Maximum measurement range | 0-75% |
| Error range | ±1.5% |
| Power source | Lithium rechargeable battery with 1000 mAh capacity |
Warranty: 24 months