RainPoint Rain Sensor
- Spedito oggi! Il prodotto è disponibile nel nostro magazzino situato in Finlandia. Gli ordini vengono spediti a velocità fulminea, di solito lo stesso giorno o il giorno lavorativo successivo. Il tempo di consegna dipende dal paese di destinazione.
- Spedito in 4–7 giorni Il prodotto viene spedito dal magazzino del fornitore e consegnato prima al nostro magazzino situato in Finlandia. Riceverai un link per il tracciamento via email non appena avremo spedito il tuo ordine dal nostro magazzino, di solito entro 4–7 giorni lavorativi dopo il tuo ordine.
- Esaurito Il prodotto non è attualmente disponibile. Per maggiori informazioni, invia un messaggio al nostro servizio clienti.
Dai un'occhiata al nostro Pagina metodi di spedizione e costi per maggiori informazioni.
Hai qualche domanda?
Preferiamo che tu invii il tuo messaggio tramite la nostra chat dal vivo. Contattarci tramite la chat ci permette di vedere il prodotto e la pagina in cui ti trovi in quel momento, così sarà più veloce per noi controllare il prodotto che ti interessa.
Possiamo aiutarti immediatamente se siamo disponibili, se siamo occupati a preparare gli ordini ti risponderemo e ti contatteremo via email e chat dal vivo.
Se sei di fretta puoi lasciare il tuo messaggio con il modulo di contatto.
Vuoi effettuare un ordine all'ingrosso più grande? Oppure desideri richiedere un preventivo per un ordine personalizzato?
Richiesta di preventivo:
- Aggiungi tutti gli articoli e le quantità nel carrello
- Vai alla "pagina Carrello" cliccando questo link o clicca sul pulsante "Contattaci" nel carrello a comparsa.
- Nella "pagina del carrello" puoi cliccare sul pulsante "Contattaci" e inviare un messaggio e una richiesta di preventivo per gli articoli nel tuo carrello.
Descrizione
Informazioni sul prodotto
RainPoint Rain Sensor
The RainPoint Rain Sensor is a practical solution for automatic irrigation systems. It works by using a mechanism that detects rainfall and automatically stops watering when it detects more than 3 mm of rainfall. This saves water, avoids overwatering your plants and ensures that the system works only when needed. The product is compatible with most controllers with solenoid valves and fits standard garden installations.
Effective operation based on rainfall
The sensor keeps the circuit closed until it detects a certain level of rainfall. When more than 3 mm of rain hits the sensor's surface, the water-absorbing plate expands, immediately breaking the circuit and stopping watering. Once the sensor dries out, the circuit closes again and the system returns to normal operation. The entire process takes 2 to 5 minutes, ensuring quick response to changing weather conditions.
Simple installation to irrigation controllers
Connecting the RainPoint sensor is intuitive - just plug one wire into the C (common) port and the other into the R (sensor) port on the controller. Thanks to its compatibility with most models of solenoid valves, there is no need for additional adapters or installation modifications.
Adjustable drying time
The sensor is equipped with a vent ring that allows you to adjust the time it takes to turn the system back on after rainfall. The wider-open vents speed up the drying process, which can be useful in sunny and windy locations. Under standard conditions, the sensor returns to operation after about 4 hours, and takes up to 3 days to dry completely.
Quick test without water
The function to test operation does not require contact with water. Just press the protrusion on top of the housing - if the connection is correct, there will be a characteristic "click" of the solenoid valve, and watering will stop. This is a quick way to verify the correctness of the installation.
| Manufacturer | RainPoint |
|---|---|
| Model | RS-Y01 |
| Power supply | 24 VAC (Volts Alternating Current) |
| Contact load capacity | 5 A |
| Cable length | 5 m |
| Conductor cross section | 0.5 mm² |
| Cable type | 2-core, in protective sheath |
| Compatibility | Compatible with most irrigation controllers (normally open and normally closed) |
| Dimensions | 16 × 6 cm |
Warranty: 36 months
RainPoint Rain Sensor
The RainPoint Rain Sensor is a practical solution for automatic irrigation systems. It works by using a mechanism that detects rainfall and automatically stops watering when it detects more than 3 mm of rainfall. This saves water, avoids overwatering your plants and ensures that the system works only when needed. The product is compatible with most controllers with solenoid valves and fits standard garden installations.
Effective operation based on rainfall
The sensor keeps the circuit closed until it detects a certain level of rainfall. When more than 3 mm of rain hits the sensor's surface, the water-absorbing plate expands, immediately breaking the circuit and stopping watering. Once the sensor dries out, the circuit closes again and the system returns to normal operation. The entire process takes 2 to 5 minutes, ensuring quick response to changing weather conditions.
Simple installation to irrigation controllers
Connecting the RainPoint sensor is intuitive - just plug one wire into the C (common) port and the other into the R (sensor) port on the controller. Thanks to its compatibility with most models of solenoid valves, there is no need for additional adapters or installation modifications.
Adjustable drying time
The sensor is equipped with a vent ring that allows you to adjust the time it takes to turn the system back on after rainfall. The wider-open vents speed up the drying process, which can be useful in sunny and windy locations. Under standard conditions, the sensor returns to operation after about 4 hours, and takes up to 3 days to dry completely.
Quick test without water
The function to test operation does not require contact with water. Just press the protrusion on top of the housing - if the connection is correct, there will be a characteristic "click" of the solenoid valve, and watering will stop. This is a quick way to verify the correctness of the installation.
| Manufacturer | RainPoint |
|---|---|
| Model | RS-Y01 |
| Power supply | 24 VAC (Volts Alternating Current) |
| Contact load capacity | 5 A |
| Cable length | 5 m |
| Conductor cross section | 0.5 mm² |
| Cable type | 2-core, in protective sheath |
| Compatibility | Compatible with most irrigation controllers (normally open and normally closed) |
| Dimensions | 16 × 6 cm |
Warranty: 36 months