ELEGOO PLA-CF Filament (Black)
- Gëtt haut verschéckt! D'Produkt ass op Lager an eisem Lager a Finnland. Bestellunge ginn blëtzarteg séier verschéckt, normalerweis de selwechten oder den nächsten Aarbechtsdag. D'Liwwerzäit hänkt vum Destinatiounsland of.
- Liwwerung bannent 4–7 Deeg. D'Produkt gëtt vum Liwwerlager verschéckt an als éischt an eist Lager a Finnland geliwwert. Dir kritt e Tracking-Link per E-Mail, soubal mir Är Bestellung vun eisem Lager verschéckt hunn, normalerweis bannent 4–7 Aarbechtsdeeg no Ärer Bestellung.
- Net op Lager Dëst Produkt ass de Moment net verfügbar. Schéckt w.e.g. eng Noriicht un eise Clientsservice fir méi Informatiounen.
Kuckt Iech w.e.g. eis un Säit mat Versandmethoden a Käschten fir méi Informatiounen.
Hutt Dir eng Fro?
Mir léiwer, wann Dir Är Noriicht iwwer eise Live-Chat schéckt. Wann Dir eis iwwer de Chat kontaktéiert, kënne mir de Produit an d'Säit gesinn, wou Dir Iech am Moment befënnt, sou datt mir méi séier de Produit iwwerpréife kënnen, deen Iech interesséiert.
Mir kënnen Iech direkt hëllefen, wa mir verfügbar sinn. Wa mir beschäftegt sinn, Bestellunge ze packen, mellen mir eis bei Iech zréck a kontaktéiere Iech per E-Mail a Live-Chat.
Wann Dir presséiert sidd, kënnt Dir Är Noriicht iwwer de Kontaktformular hannerloossen.
Wëllt Dir eng méi grouss Grousshandelsbestellung maachen? Oder wëllt Dir eng Offer fir eng personaliséiert Bestellung ufroen?
Ufro fir eng Offer:
- Füügt all Artikelen a Quantitéiten an de Wuerekuerf bäi
- Gitt op d' "Wuerekaafssäit" andeems Dir op dëse Link klickt oder klickt op de Knäppchen "Kontaktéiert eis" am Slider-Wuerekaaf.
- Op der "Wuerfkuerfsäit" kënnt Dir op de Knäppchen "Kontaktéiert eis" klicken an Dir kënnt eng Noriicht schécken an eng Offer fir Är Artikelen am Wuerekuerf ufroen.
Beschreiwung
Produktinformatiounen
ELEGOO PLA-CF Filament (black)
ELEGOO PLA-CF (polylactide doped with carbon fiber) filament combines the ease of printing typical of PLA (polylactide - a plant-derived, biodegradable plastic) with higher mechanical strength. The addition of carbon fiber increases the stiffness of the material and reduces its shrinkage during cooling, resulting in greater dimensional precision. This type of material works well in technical components, housings and prototypes that need to be durable but lightweight.
Accurate and aesthetically pleasing models
The addition of carbon fiber reduces shrinkage and deformation of the material, resulting in precise, well-fitted parts. Printed models have a matte surface and faintly visible layer lines, giving a professional effect without additional processing. The material fits most FDM 3D printers (Fused Deposition Modeling - a technology that applies molten plastic layer by layer).
Printing without problems
The filament has a diameter of 1.75 mm and a dimensional tolerance of ± 0.02 mm, which facilitates even feeding without jams. It is vacuum-packed with a moisture absorber to protect against bubbles and a clogged nozzle. It can be used alone or combined with classic PLA, maintaining high quality prints.
General
| Manufacturer | ELEGOO |
|---|---|
| Model | 50.203.0464 |
| Color | Black |
| Weight | 1 kg |
Recommended print settings
| Drying settings before printing | 55 ± 5°C |
|---|---|
| Ambient temperature and humidity | ≤ 50°C, ≤ 20% relative humidity (store with moisture absorber) |
| Nozzle temperature | 210 - 240°C |
| Table temperature (depending on printer and surface) | 35 - 65°C |
| Type of working surface | Textured PEI (polyetherimide - a durable, adherent material used as a base for 3D printing) or other compatible surface |
| Printing speed | Less than 300 mm/s |
Physical properties
| Density | 1.24 g/cm³ |
|---|---|
| Melting point | 165°C |
| Deflection temperature under load | 56°C |
| Softening temperature (Vicat test) | 64°C |
Mechanical properties
| Tensile strength (XY - measured in the horizontal plane of the print, where the material is strongest) | 39 ± 3 MPa |
|---|---|
| Elongation at break (XY) | 7,5% ± 1,3% |
| Bending strength (XY) | 78 ± 2 MPa |
| Bending modulus (XY) | 3341 ± 172 MPa |
| Impact strength (XY) | 24.7 ± 1.5 kJ/m² |
Warranty: 12 months
ELEGOO PLA-CF Filament (black)
ELEGOO PLA-CF (polylactide doped with carbon fiber) filament combines the ease of printing typical of PLA (polylactide - a plant-derived, biodegradable plastic) with higher mechanical strength. The addition of carbon fiber increases the stiffness of the material and reduces its shrinkage during cooling, resulting in greater dimensional precision. This type of material works well in technical components, housings and prototypes that need to be durable but lightweight.
Accurate and aesthetically pleasing models
The addition of carbon fiber reduces shrinkage and deformation of the material, resulting in precise, well-fitted parts. Printed models have a matte surface and faintly visible layer lines, giving a professional effect without additional processing. The material fits most FDM 3D printers (Fused Deposition Modeling - a technology that applies molten plastic layer by layer).
Printing without problems
The filament has a diameter of 1.75 mm and a dimensional tolerance of ± 0.02 mm, which facilitates even feeding without jams. It is vacuum-packed with a moisture absorber to protect against bubbles and a clogged nozzle. It can be used alone or combined with classic PLA, maintaining high quality prints.
General
| Manufacturer | ELEGOO |
|---|---|
| Model | 50.203.0464 |
| Color | Black |
| Weight | 1 kg |
Recommended print settings
| Drying settings before printing | 55 ± 5°C |
|---|---|
| Ambient temperature and humidity | ≤ 50°C, ≤ 20% relative humidity (store with moisture absorber) |
| Nozzle temperature | 210 - 240°C |
| Table temperature (depending on printer and surface) | 35 - 65°C |
| Type of working surface | Textured PEI (polyetherimide - a durable, adherent material used as a base for 3D printing) or other compatible surface |
| Printing speed | Less than 300 mm/s |
Physical properties
| Density | 1.24 g/cm³ |
|---|---|
| Melting point | 165°C |
| Deflection temperature under load | 56°C |
| Softening temperature (Vicat test) | 64°C |
Mechanical properties
| Tensile strength (XY - measured in the horizontal plane of the print, where the material is strongest) | 39 ± 3 MPa |
|---|---|
| Elongation at break (XY) | 7,5% ± 1,3% |
| Bending strength (XY) | 78 ± 2 MPa |
| Bending modulus (XY) | 3341 ± 172 MPa |
| Impact strength (XY) | 24.7 ± 1.5 kJ/m² |
Warranty: 12 months