RainPoint Rain Sensor
- Gëtt haut verschéckt! D'Produkt ass op Lager an eisem Lager a Finnland. Bestellunge ginn blëtzarteg séier verschéckt, normalerweis de selwechten oder den nächsten Aarbechtsdag. D'Liwwerzäit hänkt vum Destinatiounsland of.
- Liwwerung bannent 4–7 Deeg. D'Produkt gëtt vum Liwwerlager verschéckt an als éischt an eist Lager a Finnland geliwwert. Dir kritt e Tracking-Link per E-Mail, soubal mir Är Bestellung vun eisem Lager verschéckt hunn, normalerweis bannent 4–7 Aarbechtsdeeg no Ärer Bestellung.
- Net op Lager Dëst Produkt ass de Moment net verfügbar. Schéckt w.e.g. eng Noriicht un eise Clientsservice fir méi Informatiounen.
Kuckt Iech w.e.g. eis un Säit mat Versandmethoden a Käschten fir méi Informatiounen.
Hutt Dir eng Fro?
Mir léiwer, wann Dir Är Noriicht iwwer eise Live-Chat schéckt. Wann Dir eis iwwer de Chat kontaktéiert, kënne mir de Produit an d'Säit gesinn, wou Dir Iech am Moment befënnt, sou datt mir méi séier de Produit iwwerpréife kënnen, deen Iech interesséiert.
Mir kënnen Iech direkt hëllefen, wa mir verfügbar sinn. Wa mir beschäftegt sinn, Bestellunge ze packen, mellen mir eis bei Iech zréck a kontaktéiere Iech per E-Mail a Live-Chat.
Wann Dir presséiert sidd, kënnt Dir Är Noriicht iwwer de Kontaktformular hannerloossen.
Wëllt Dir eng méi grouss Grousshandelsbestellung maachen? Oder wëllt Dir eng Offer fir eng personaliséiert Bestellung ufroen?
Ufro fir eng Offer:
- Füügt all Artikelen a Quantitéiten an de Wuerekuerf bäi
- Gitt op d' "Wuerekaafssäit" andeems Dir op dëse Link klickt oder klickt op de Knäppchen "Kontaktéiert eis" am Slider-Wuerekaaf.
- Op der "Wuerfkuerfsäit" kënnt Dir op de Knäppchen "Kontaktéiert eis" klicken an Dir kënnt eng Noriicht schécken an eng Offer fir Är Artikelen am Wuerekuerf ufroen.
Beschreiwung
Produktinformatiounen
RainPoint Rain Sensor
The RainPoint Rain Sensor is a practical solution for automatic irrigation systems. It works by using a mechanism that detects rainfall and automatically stops watering when it detects more than 3 mm of rainfall. This saves water, avoids overwatering your plants and ensures that the system works only when needed. The product is compatible with most controllers with solenoid valves and fits standard garden installations.
Effective operation based on rainfall
The sensor keeps the circuit closed until it detects a certain level of rainfall. When more than 3 mm of rain hits the sensor's surface, the water-absorbing plate expands, immediately breaking the circuit and stopping watering. Once the sensor dries out, the circuit closes again and the system returns to normal operation. The entire process takes 2 to 5 minutes, ensuring quick response to changing weather conditions.
Simple installation to irrigation controllers
Connecting the RainPoint sensor is intuitive - just plug one wire into the C (common) port and the other into the R (sensor) port on the controller. Thanks to its compatibility with most models of solenoid valves, there is no need for additional adapters or installation modifications.
Adjustable drying time
The sensor is equipped with a vent ring that allows you to adjust the time it takes to turn the system back on after rainfall. The wider-open vents speed up the drying process, which can be useful in sunny and windy locations. Under standard conditions, the sensor returns to operation after about 4 hours, and takes up to 3 days to dry completely.
Quick test without water
The function to test operation does not require contact with water. Just press the protrusion on top of the housing - if the connection is correct, there will be a characteristic "click" of the solenoid valve, and watering will stop. This is a quick way to verify the correctness of the installation.
| Manufacturer | RainPoint |
|---|---|
| Model | RS-Y01 |
| Power supply | 24 VAC (Volts Alternating Current) |
| Contact load capacity | 5 A |
| Cable length | 5 m |
| Conductor cross section | 0.5 mm² |
| Cable type | 2-core, in protective sheath |
| Compatibility | Compatible with most irrigation controllers (normally open and normally closed) |
| Dimensions | 16 × 6 cm |
Warranty: 36 months
RainPoint Rain Sensor
The RainPoint Rain Sensor is a practical solution for automatic irrigation systems. It works by using a mechanism that detects rainfall and automatically stops watering when it detects more than 3 mm of rainfall. This saves water, avoids overwatering your plants and ensures that the system works only when needed. The product is compatible with most controllers with solenoid valves and fits standard garden installations.
Effective operation based on rainfall
The sensor keeps the circuit closed until it detects a certain level of rainfall. When more than 3 mm of rain hits the sensor's surface, the water-absorbing plate expands, immediately breaking the circuit and stopping watering. Once the sensor dries out, the circuit closes again and the system returns to normal operation. The entire process takes 2 to 5 minutes, ensuring quick response to changing weather conditions.
Simple installation to irrigation controllers
Connecting the RainPoint sensor is intuitive - just plug one wire into the C (common) port and the other into the R (sensor) port on the controller. Thanks to its compatibility with most models of solenoid valves, there is no need for additional adapters or installation modifications.
Adjustable drying time
The sensor is equipped with a vent ring that allows you to adjust the time it takes to turn the system back on after rainfall. The wider-open vents speed up the drying process, which can be useful in sunny and windy locations. Under standard conditions, the sensor returns to operation after about 4 hours, and takes up to 3 days to dry completely.
Quick test without water
The function to test operation does not require contact with water. Just press the protrusion on top of the housing - if the connection is correct, there will be a characteristic "click" of the solenoid valve, and watering will stop. This is a quick way to verify the correctness of the installation.
| Manufacturer | RainPoint |
|---|---|
| Model | RS-Y01 |
| Power supply | 24 VAC (Volts Alternating Current) |
| Contact load capacity | 5 A |
| Cable length | 5 m |
| Conductor cross section | 0.5 mm² |
| Cable type | 2-core, in protective sheath |
| Compatibility | Compatible with most irrigation controllers (normally open and normally closed) |
| Dimensions | 16 × 6 cm |
Warranty: 36 months