Filament PLA Bronze ELEGOO
- Pristatoma šiandien! Produktas yra mūsų sandėlyje Suomijoje. Užsakymai paprastai išsiunčiami žaibišku greičiu tą pačią arba kitą darbo dieną. Pristatymo laikas priklauso nuo paskirties šalies.
- Pristatymas per 4–7 dienas Produktas išsiunčiamas iš tiekėjo sandėlio ir pirmiausia pristatomas į mūsų sandėlį Suomijoje. Gavę užsakymą iš mūsų sandėlio, el. paštu gausite siuntos sekimo nuorodą, paprastai per 4–7 darbo dienas nuo užsakymo pateikimo.
- Neturime sandėlyje Produktas šiuo metu neprieinamas. Dėl daugiau informacijos prašome siųsti žinutę mūsų klientų aptarnavimui.
Prašome peržiūrėti mūsų Pristatymo būdų ir kainų puslapis daugiau informacijos.
Ar turite kokių nors klausimų?
Mes teikiame pirmenybę, kad žinutę siųstumėte per mūsų tiesioginį pokalbį. Susisiekimas su mumis per pokalbį leidžia mums matyti produktą ir puslapį, kuriame šiuo metu esate, todėl mums bus greičiau patikrinti jus dominančią prekę.
Galime jums padėti iš karto, jei esame laisvi, jei užsiimame užsakymų pakavimu, susisieksime su jumis el. paštu ir tiesioginiu pokalbiu.
Jei skubate, galite palikti savo žinutę kontaktų formoje.
Ar norėtumėte pateikti didesnį didmeninės prekybos užsakymą? Ar norėtumėte pateikti užklausą dėl individualaus užsakymo?
Užklausa dėl kainos:
- Įdėkite visas prekes ir kiekius į krepšelį
- Eikite į "Krepšelio puslapį" spustelėdami šią nuorodą arba spustelėkite mygtuką "Susisiekite su mumis" slankiklio krepšelyje.
- Puslapyje "Krepšelis" galite spustelėti mygtuką "Susisiekite su mumis" ir išsiųsti žinutę bei užklausą dėl savo krepšelio prekių.
Aprašymas
Produkto informacija
PLA Bronze Filament from ELEGOO
Bronze-colored filament from ELEGOO with a subtle metallic sheen allows you to create models that look elegant and stylish. This effect works great for figures, props, costume details and decorations where visual depth and a classic finish are important. The material is based on PLA (polylactide - a plant-based biodegradable plastic), so it is environmentally friendly. There is 1 kg of filament on the spool, which is enough for many medium and large prints.
Stable and clean printing
The product has a diameter of 1.75 mm and a very precise dimensional tolerance (± 0.02 mm), which ensures even feeding into the printer without jamming. It adheres well to the work table and does not create bubbles or excessive threads (known as stringing), which minimizes material waste and saves time. The result is smooth, durable models with a uniform appearance.
Practical and eco-friendly spools
Filament spools are made of cardboard, making it easy to recycle and reducing the product's environmental impact. In addition, each spool is precisely wound by machine and controlled by hand to prevent tangling. Three holes in the spool make it easy to see how much material is left.
General
| Manufacturer | ELEGOO |
|---|---|
| Model | 50.203.0465 |
| Color | Brown |
| Weight | 1 kg |
Recommended print settings
| Drying settings before printing | 55 ± 5°C |
|---|---|
| Ambient temperature and humidity | ≤ 50°C, ≤ 20% relative humidity (store with moisture absorber) |
| Nozzle temperature | 190 - 230°C |
| Table temperature (depending on printer and surface) | 35 - 65°C |
| Type of working surface | Textured PEI (polyetherimide - a durable, adherent material used as a base for 3D printing) or other compatible surface |
| Printing speed | Less than 300 mm/s |
Physical properties
| Density | 1.26 g/cm³ |
|---|---|
| Melting point | 158°C |
| Deflection temperature under load | 57°C |
| Softening temperature (Vicat test) | 62°C |
Mechanical properties
| Tensile strength (XY-measurement made in the horizontal plane of the print, where the material is strongest) | 38 ± 3 MPa |
|---|---|
| Elongation at break (XY) | 10,5% ± 2,1% |
| Bending strength (XY) | 72 ± 5 MPa |
| Bending modulus (XY) | 2993 ± 182 MPa |
| Impact strength (XY) | 66.2 ± 3.9 kJ/m² |
Warranty: 12 months
PLA Bronze Filament from ELEGOO
Bronze-colored filament from ELEGOO with a subtle metallic sheen allows you to create models that look elegant and stylish. This effect works great for figures, props, costume details and decorations where visual depth and a classic finish are important. The material is based on PLA (polylactide - a plant-based biodegradable plastic), so it is environmentally friendly. There is 1 kg of filament on the spool, which is enough for many medium and large prints.
Stable and clean printing
The product has a diameter of 1.75 mm and a very precise dimensional tolerance (± 0.02 mm), which ensures even feeding into the printer without jamming. It adheres well to the work table and does not create bubbles or excessive threads (known as stringing), which minimizes material waste and saves time. The result is smooth, durable models with a uniform appearance.
Practical and eco-friendly spools
Filament spools are made of cardboard, making it easy to recycle and reducing the product's environmental impact. In addition, each spool is precisely wound by machine and controlled by hand to prevent tangling. Three holes in the spool make it easy to see how much material is left.
General
| Manufacturer | ELEGOO |
|---|---|
| Model | 50.203.0465 |
| Color | Brown |
| Weight | 1 kg |
Recommended print settings
| Drying settings before printing | 55 ± 5°C |
|---|---|
| Ambient temperature and humidity | ≤ 50°C, ≤ 20% relative humidity (store with moisture absorber) |
| Nozzle temperature | 190 - 230°C |
| Table temperature (depending on printer and surface) | 35 - 65°C |
| Type of working surface | Textured PEI (polyetherimide - a durable, adherent material used as a base for 3D printing) or other compatible surface |
| Printing speed | Less than 300 mm/s |
Physical properties
| Density | 1.26 g/cm³ |
|---|---|
| Melting point | 158°C |
| Deflection temperature under load | 57°C |
| Softening temperature (Vicat test) | 62°C |
Mechanical properties
| Tensile strength (XY-measurement made in the horizontal plane of the print, where the material is strongest) | 38 ± 3 MPa |
|---|---|
| Elongation at break (XY) | 10,5% ± 2,1% |
| Bending strength (XY) | 72 ± 5 MPa |
| Bending modulus (XY) | 2993 ± 182 MPa |
| Impact strength (XY) | 66.2 ± 3.9 kJ/m² |
Warranty: 12 months