ELEGOO PLA+ Filament (Blue)
- Nosūtīšana šodien! Produkts ir pieejams mūsu noliktavā Somijā. Pasūtījumi tiek nosūtīti zibens ātrumā, parasti tajā pašā vai nākamajā darba dienā. Piegādes laiks ir atkarīgs no galamērķa valsts.
- Nosūtīšana 4–7 dienu laikā Produkts tiek nosūtīts no piegādātāja noliktavas un vispirms piegādāts mūsu noliktavai Somijā. Jūs saņemsiet izsekošanas saiti pa e-pastu, tiklīdz būsim nosūtījuši jūsu pasūtījumu no mūsu noliktavas, parasti 4–7 darba dienu laikā pēc pasūtījuma veikšanas.
- Nav noliktavā Produkts pašlaik nav pieejams. Lai iegūtu vairāk informācijas, lūdzu, nosūtiet ziņu mūsu klientu apkalpošanas dienestam.
Lūdzu, apskatiet mūsu Piegādes metožu un izmaksu lapa lai iegūtu vairāk informācijas.
Vai jums ir kādi jautājumi?
Mēs dodam priekšroku, lai jūs nosūtītu savu ziņu, izmantojot mūsu tiešraides tērzēšanu. Sazināšanās ar mums caur tērzēšanu ļauj mums redzēt produktu un lapu, kurā jūs pašlaik atrodaties, tāpēc mums būs ātrāk pārbaudīt produktu, kas jūs interesē.
Mēs varam jums palīdzēt nekavējoties, ja esam pieejami, ja esam aizņemti ar pasūtījumu komplektēšanu, mēs atgriezīsimies pie jums un sazināsimies ar jums pa e-pastu un tiešraides tērzēšanu.
Ja jums ir steidzami, varat atstāt savu ziņu ar kontakta formu.
Vai vēlaties veikt lielāku vairumtirdzniecības pasūtījumu? Vai vēlaties pieprasīt cenu piedāvājumu pielāgotam pasūtījumam?
Pieprasījums pēc piedāvājuma:
- Pievienojiet visus priekšmetus un daudzumus grozam
- Dodieties uz "Groza lapu" noklikšķinot uz šīs saites vai noklikšķiniet uz pogas "Sazinieties ar mums" slīdņa grozā.
- Lapas "Grozs" sadaļā varat noklikšķināt uz pogas "Sazināties ar mums" un nosūtīt ziņojumu un cenu pieprasījumu par groza precēm.
Apraksts
Produktu informācija
ELEGOO PLA+ Filament (blue)
ELEGOO filament in blue is a good choice if you want a light, clean shade that looks good on larger surfaces and in details. The material has a uniform color and smooth texture, so prints look aesthetically pleasing and are well reproduced. It is based on PLA+ (polylactide plus - a biodegradable material of plant origin, enriched with additives to increase durability). The spool contains 1 kg of filament.
Durability and precision
With increased resistance to breakage and better layer consistency, PLA+ is more durable than standard PLA, yet just as easy to print. A consistent diameter of 1.75 mm and dimensional precision of ± 0.02 mm guarantee smooth material feeding and less risk of blockages. Smooth surface and good heat conduction make even more complex models come out cleanly and without deformation.
Convenience and compatibility
The material is wound evenly and checked by hand, reducing the risk of tangles. The whole thing is vacuum-packed with a moisture absorber, so once opened you can start printing right away. The product fits most FDM (Fused Deposition Modeling - a 3D printing technology in which material is melted and applied in layers) printers that support 1.75mm filament.
General
| Manufacturer | ELEGOO |
|---|---|
| Model | 50.203.0161 |
| Color | Blue |
| Weight | 1 kg |
Recommended print settings
| Drying settings before printing | 55 ± 5°C |
|---|---|
| Ambient temperature and humidity | ≤ 50°C, ≤ 20% relative humidity (store with moisture absorber) |
| Nozzle temperature | 200 - 230°C |
| Table temperature (depending on printer and surface) | 35 - 65°C |
| Type of working surface | Textured PEI (polyetherimide - a durable material that holds prints well) or other compatible plates |
| Printing speed | Less than 280 mm/sec |
Physical properties
| Density | 1.30 g/cm³ |
|---|---|
| Melting point | 161°C |
| Deflection temperature under load | 56°C |
| Softening temperature (Vicat test) | 63°C |
Mechanical properties
| Tensile strength (XY - measurement made in the horizontal plane of the print, where the material is strongest) | 38 ± 2 MPa |
|---|---|
| Elongation at break (XY) | 7,9% ± 1,6% |
| Bending strength (XY) | 74 ± 4 MPa |
| Bending modulus (XY) | 2979 ± 156 MPa |
| Impact strength (XY) | 65.5 ± 3.6 kJ/m² |
Warranty: 12 months
ELEGOO PLA+ Filament (blue)
ELEGOO filament in blue is a good choice if you want a light, clean shade that looks good on larger surfaces and in details. The material has a uniform color and smooth texture, so prints look aesthetically pleasing and are well reproduced. It is based on PLA+ (polylactide plus - a biodegradable material of plant origin, enriched with additives to increase durability). The spool contains 1 kg of filament.
Durability and precision
With increased resistance to breakage and better layer consistency, PLA+ is more durable than standard PLA, yet just as easy to print. A consistent diameter of 1.75 mm and dimensional precision of ± 0.02 mm guarantee smooth material feeding and less risk of blockages. Smooth surface and good heat conduction make even more complex models come out cleanly and without deformation.
Convenience and compatibility
The material is wound evenly and checked by hand, reducing the risk of tangles. The whole thing is vacuum-packed with a moisture absorber, so once opened you can start printing right away. The product fits most FDM (Fused Deposition Modeling - a 3D printing technology in which material is melted and applied in layers) printers that support 1.75mm filament.
General
| Manufacturer | ELEGOO |
|---|---|
| Model | 50.203.0161 |
| Color | Blue |
| Weight | 1 kg |
Recommended print settings
| Drying settings before printing | 55 ± 5°C |
|---|---|
| Ambient temperature and humidity | ≤ 50°C, ≤ 20% relative humidity (store with moisture absorber) |
| Nozzle temperature | 200 - 230°C |
| Table temperature (depending on printer and surface) | 35 - 65°C |
| Type of working surface | Textured PEI (polyetherimide - a durable material that holds prints well) or other compatible plates |
| Printing speed | Less than 280 mm/sec |
Physical properties
| Density | 1.30 g/cm³ |
|---|---|
| Melting point | 161°C |
| Deflection temperature under load | 56°C |
| Softening temperature (Vicat test) | 63°C |
Mechanical properties
| Tensile strength (XY - measurement made in the horizontal plane of the print, where the material is strongest) | 38 ± 2 MPa |
|---|---|
| Elongation at break (XY) | 7,9% ± 1,6% |
| Bending strength (XY) | 74 ± 4 MPa |
| Bending modulus (XY) | 2979 ± 156 MPa |
| Impact strength (XY) | 65.5 ± 3.6 kJ/m² |
Warranty: 12 months