Filament PLA Marble ELEGOO
- Nosūtīšana šodien! Produkts ir pieejams mūsu noliktavā Somijā. Pasūtījumi tiek nosūtīti zibens ātrumā, parasti tajā pašā vai nākamajā darba dienā. Piegādes laiks ir atkarīgs no galamērķa valsts.
- Nosūtīšana 4–7 dienu laikā Produkts tiek nosūtīts no piegādātāja noliktavas un vispirms piegādāts mūsu noliktavai Somijā. Jūs saņemsiet izsekošanas saiti pa e-pastu, tiklīdz būsim nosūtījuši jūsu pasūtījumu no mūsu noliktavas, parasti 4–7 darba dienu laikā pēc pasūtījuma veikšanas.
- Nav noliktavā Produkts pašlaik nav pieejams. Lai iegūtu vairāk informācijas, lūdzu, nosūtiet ziņu mūsu klientu apkalpošanas dienestam.
Lūdzu, apskatiet mūsu Piegādes metožu un izmaksu lapa lai iegūtu vairāk informācijas.
Vai jums ir kādi jautājumi?
Mēs dodam priekšroku, lai jūs nosūtītu savu ziņu, izmantojot mūsu tiešraides tērzēšanu. Sazināšanās ar mums caur tērzēšanu ļauj mums redzēt produktu un lapu, kurā jūs pašlaik atrodaties, tāpēc mums būs ātrāk pārbaudīt produktu, kas jūs interesē.
Mēs varam jums palīdzēt nekavējoties, ja esam pieejami, ja esam aizņemti ar pasūtījumu komplektēšanu, mēs atgriezīsimies pie jums un sazināsimies ar jums pa e-pastu un tiešraides tērzēšanu.
Ja jums ir steidzami, varat atstāt savu ziņu ar kontakta formu.
Vai vēlaties veikt lielāku vairumtirdzniecības pasūtījumu? Vai vēlaties pieprasīt cenu piedāvājumu pielāgotam pasūtījumam?
Pieprasījums pēc piedāvājuma:
- Pievienojiet visus priekšmetus un daudzumus grozam
- Dodieties uz "Groza lapu" noklikšķinot uz šīs saites vai noklikšķiniet uz pogas "Sazinieties ar mums" slīdņa grozā.
- Lapas "Grozs" sadaļā varat noklikšķināt uz pogas "Sazināties ar mums" un nosūtīt ziņojumu un cenu pieprasījumu par groza precēm.
Apraksts
Produktu informācija
PLA Marble Filament by ELEGOO
Marble-colored filament from ELEGOO allows you to create unique models with a realistic stone finish. Thanks to additives that give the surface the characteristic marble effect, the prints gain an aesthetic that is ideal for decorations, figurines or architectural mock-ups. The material is based on PLA (polylactide - a plant-based biodegradable plastic), so it is environmentally friendly. There is 1 kg of filament on the spool, which is enough for many medium and large prints.
Stable and clean printing
The product has a diameter of 1.75 mm and a very precise dimensional tolerance (± 0.02 mm), which ensures even feeding into the printer without jams. It adheres well to the work table and does not create bubbles or excessive threads (known as stringing), which minimizes material waste and saves time. The result is smooth, durable models with a uniform appearance.
Practical and eco-friendly spools
Filament spools are made of cardboard, making it easy to recycle and reducing the product's environmental impact. In addition, each spool is precisely wound by machine and controlled by hand to prevent tangling. Three holes in the spool make it easy to see how much material is left.
General
| Manufacturer | ELEGOO |
|---|---|
| Model | 50.203.0113 |
| Color | Marble |
| Weight | 1 kg |
Recommended print settings
| Drying settings before printing | 55 ± 5°C |
|---|---|
| Ambient temperature and humidity | ≤ 50°C, ≤ 20% relative humidity (store with moisture absorber) |
| Nozzle temperature | 190 - 230°C |
| Table temperature (depending on printer and surface) | 35 - 65°C |
| Type of working surface | Textured PEI (polyetherimide - a durable, adherent material used as a base for 3D printing) or other compatible surface |
| Printing speed | Less than 300 mm/s |
Physical properties
| Density | 1.26 g/cm³ |
|---|---|
| Melting point | 158°C |
| Deflection temperature under load | 57°C |
| Softening temperature (Vicat test) | 62°C |
Mechanical properties
| Tensile strength (XY-measurement made in the horizontal plane of the print, where the material is strongest) | 38 ± 3 MPa |
|---|---|
| Elongation at break (XY) | 10,5% ± 2,1% |
| Bending strength (XY) | 72 ± 5 MPa |
| Bending modulus (XY) | 2993 ± 182 MPa |
| Impact strength (XY) | 66.2 ± 3.9 kJ/m² |
Warranty: 12 months
PLA Marble Filament by ELEGOO
Marble-colored filament from ELEGOO allows you to create unique models with a realistic stone finish. Thanks to additives that give the surface the characteristic marble effect, the prints gain an aesthetic that is ideal for decorations, figurines or architectural mock-ups. The material is based on PLA (polylactide - a plant-based biodegradable plastic), so it is environmentally friendly. There is 1 kg of filament on the spool, which is enough for many medium and large prints.
Stable and clean printing
The product has a diameter of 1.75 mm and a very precise dimensional tolerance (± 0.02 mm), which ensures even feeding into the printer without jams. It adheres well to the work table and does not create bubbles or excessive threads (known as stringing), which minimizes material waste and saves time. The result is smooth, durable models with a uniform appearance.
Practical and eco-friendly spools
Filament spools are made of cardboard, making it easy to recycle and reducing the product's environmental impact. In addition, each spool is precisely wound by machine and controlled by hand to prevent tangling. Three holes in the spool make it easy to see how much material is left.
General
| Manufacturer | ELEGOO |
|---|---|
| Model | 50.203.0113 |
| Color | Marble |
| Weight | 1 kg |
Recommended print settings
| Drying settings before printing | 55 ± 5°C |
|---|---|
| Ambient temperature and humidity | ≤ 50°C, ≤ 20% relative humidity (store with moisture absorber) |
| Nozzle temperature | 190 - 230°C |
| Table temperature (depending on printer and surface) | 35 - 65°C |
| Type of working surface | Textured PEI (polyetherimide - a durable, adherent material used as a base for 3D printing) or other compatible surface |
| Printing speed | Less than 300 mm/s |
Physical properties
| Density | 1.26 g/cm³ |
|---|---|
| Melting point | 158°C |
| Deflection temperature under load | 57°C |
| Softening temperature (Vicat test) | 62°C |
Mechanical properties
| Tensile strength (XY-measurement made in the horizontal plane of the print, where the material is strongest) | 38 ± 3 MPa |
|---|---|
| Elongation at break (XY) | 10,5% ± 2,1% |
| Bending strength (XY) | 72 ± 5 MPa |
| Bending modulus (XY) | 2993 ± 182 MPa |
| Impact strength (XY) | 66.2 ± 3.9 kJ/m² |
Warranty: 12 months