FNIRSI 1013D 7" portable tablet oscilloscope
- Nosūtīšana šodien! Produkts ir pieejams mūsu noliktavā Somijā. Pasūtījumi tiek nosūtīti zibens ātrumā, parasti tajā pašā vai nākamajā darba dienā. Piegādes laiks ir atkarīgs no galamērķa valsts.
- Nosūtīšana 4–7 dienu laikā Produkts tiek nosūtīts no piegādātāja noliktavas un vispirms piegādāts mūsu noliktavai Somijā. Jūs saņemsiet izsekošanas saiti pa e-pastu, tiklīdz būsim nosūtījuši jūsu pasūtījumu no mūsu noliktavas, parasti 4–7 darba dienu laikā pēc pasūtījuma veikšanas.
- Nav noliktavā Produkts pašlaik nav pieejams. Lai iegūtu vairāk informācijas, lūdzu, nosūtiet ziņu mūsu klientu apkalpošanas dienestam.
Lūdzu, apskatiet mūsu Piegādes metožu un izmaksu lapa lai iegūtu vairāk informācijas.
Vai jums ir kādi jautājumi?
Mēs dodam priekšroku, lai jūs nosūtītu savu ziņu, izmantojot mūsu tiešraides tērzēšanu. Sazināšanās ar mums caur tērzēšanu ļauj mums redzēt produktu un lapu, kurā jūs pašlaik atrodaties, tāpēc mums būs ātrāk pārbaudīt produktu, kas jūs interesē.
Mēs varam jums palīdzēt nekavējoties, ja esam pieejami, ja esam aizņemti ar pasūtījumu komplektēšanu, mēs atgriezīsimies pie jums un sazināsimies ar jums pa e-pastu un tiešraides tērzēšanu.
Ja jums ir steidzami, varat atstāt savu ziņu ar kontakta formu.
Vai vēlaties veikt lielāku vairumtirdzniecības pasūtījumu? Vai vēlaties pieprasīt cenu piedāvājumu pielāgotam pasūtījumam?
Pieprasījums pēc piedāvājuma:
- Pievienojiet visus priekšmetus un daudzumus grozam
- Dodieties uz "Groza lapu" noklikšķinot uz šīs saites vai noklikšķiniet uz pogas "Sazinieties ar mums" slīdņa grozā.
- Lapas "Grozs" sadaļā varat noklikšķināt uz pogas "Sazināties ar mums" un nosūtīt ziņojumu un cenu pieprasījumu par groza precēm.
Apraksts
Produktu informācija
FNIRSI 1013D 7" portable tablet oscilloscope
The FNIRSI 1013D portable oscilloscope with a 7" touch screen, 2 measurement channels, 100 MHz bandwidth and 1 GSa/s sampling rate allows precise signal analysis in service, workshop and electronic device design. The device is equipped with an easy-to-read 800x480 TFT screen, automatic one-button signal adjustment, and waveform recording function, allowing convenient and fast measurements anywhere. Support for analog and digital signal analysis makes it suitable for equipment service and DIY applications. The built-in 6,000 mAh lithium battery allows the device to operate for about 4 hours.
Clear touchscreen
The FNIRSI 1013D features a 7-inch TFT LCD screen with 800x480 resolution, providing high brightness, contrast and accurate waveform reproduction. Touch operation of the screen allows quick zooming, panning and changing of measurement parameters, speeding up work without the need for physical buttons. The screen is made with capacitive technology, known from modern smartphones, which ensures smooth operation and no delays when changing settings. The cursor measurement function allows accurate reading of signal amplitude, period and frequency without the need to convert units from the screen's grid, which is especially useful with distorted signals or rectangular waveforms with noise.
Two measurement channels
The device is equipped with two measurement channels with an input impedance of 1 MΩ, which allow the analysis of two signals simultaneously, making it easier to compare the input and output of amplifier circuits, converters or PWM signal analysis. This makes the range of applications much wider than with single-channel models. You can also perform Lissajous pattern analysis in XY mode, which allows you to determine the frequency, amplitude and phase shift between two groups of signals.
Automatic signal adjustment
The one-button automatic adjustment function allows you to instantly adjust signal measurement parameters without manual calibration. As a result, the FNIRSI 1013D can adjust the settings for a 1 Vpp signal within 1 second, saving time and increasing work efficiency. The built-in fuzzy logic algorithm ensures high accuracy and automatically places the signal in the center of the screen, making analysis much easier.
Protection against damage
The oscilloscope uses built-in surge protection modules up to 400 V to prevent accidental damage to the device when measuring high-voltage signals, even if the probe is not set to 10X mode. This allows you to safely test power and high-voltage circuits.
Data storage and export
The FNIRSI 1013D offers an internal memory of 1 GB, which allows you to store up to 1,000 images and 1,000 waveform sets. This allows you to quickly save one-touch measurement results and export them via USB to a computer for further analysis. The waveform manager function allows you to view thumbnails of stored waveforms, zoom in, delete and analyze them with a cursor directly on the device - similar to a smartphone gallery, adding to the convenience of data management.
Advanced triggering functions
The oscilloscope offers a full set of trigger modes - Auto, Single and Normal. This arrangement allows you to test sudden pulsed ignition signals, IR remote control signals or sine wave signals depending on the selected mode, making the device a versatile diagnostic tool. You can also set the trigger edge (rising/falling) and trigger channel, allowing you to precisely capture the signal fragments of interest.
Included:
- FNIRSI 1013D portable touchscreen oscilloscope
- Probe (100 MHz) x2
- USB charger
- User manual
| Manufacturer | FNIRSI |
|---|---|
| Model | 1013D |
| Number of channels | 2 |
| LCD screen size | 7 inches |
| LCD resolution | 800 x 480 |
| Display technology | TFT |
| Bandwidth | 100 MHz |
| Sampling frequency | 1 GSa/s |
| Highest test voltage | 1X: 40V 10X: 400V |
| Cursor | XY position Trigger Y |
| Roll mode | Supported |
| Automatic one-button setting | Supported |
| Waveform storage | 1000 images + 1000 waveforms |
| Waveform manager | Supported |
| Voltage accuracy | ± 2% |
| Rise time | < 3 ns |
| Memory depth | 240 Kbit |
| Input resistance | 1 MΩ |
| Sensitivity | 50 mV ~ 500 V |
| Time base | 50 s ~ 10 ns |
| Trigger mode | Single / Normal / Auto |
| Trigger edge | Ascending / Descending |
| Coupling | AC / DC |
| Frequency accuracy | ±0,01% |
| Parameters | 12 types in total |
| Battery | Lithium with a capacity of 6000 mAh |
| Operating time | 4 hours |
| Expansion | USB export |
| Charging | USB-C 5V 2A/3A/4A |
| Dimensions | 184 x 124 x 50 mm |
Warranty: 24 months
FNIRSI 1013D 7" portable tablet oscilloscope
The FNIRSI 1013D portable oscilloscope with a 7" touch screen, 2 measurement channels, 100 MHz bandwidth and 1 GSa/s sampling rate allows precise signal analysis in service, workshop and electronic device design. The device is equipped with an easy-to-read 800x480 TFT screen, automatic one-button signal adjustment, and waveform recording function, allowing convenient and fast measurements anywhere. Support for analog and digital signal analysis makes it suitable for equipment service and DIY applications. The built-in 6,000 mAh lithium battery allows the device to operate for about 4 hours.
Clear touchscreen
The FNIRSI 1013D features a 7-inch TFT LCD screen with 800x480 resolution, providing high brightness, contrast and accurate waveform reproduction. Touch operation of the screen allows quick zooming, panning and changing of measurement parameters, speeding up work without the need for physical buttons. The screen is made with capacitive technology, known from modern smartphones, which ensures smooth operation and no delays when changing settings. The cursor measurement function allows accurate reading of signal amplitude, period and frequency without the need to convert units from the screen's grid, which is especially useful with distorted signals or rectangular waveforms with noise.
Two measurement channels
The device is equipped with two measurement channels with an input impedance of 1 MΩ, which allow the analysis of two signals simultaneously, making it easier to compare the input and output of amplifier circuits, converters or PWM signal analysis. This makes the range of applications much wider than with single-channel models. You can also perform Lissajous pattern analysis in XY mode, which allows you to determine the frequency, amplitude and phase shift between two groups of signals.
Automatic signal adjustment
The one-button automatic adjustment function allows you to instantly adjust signal measurement parameters without manual calibration. As a result, the FNIRSI 1013D can adjust the settings for a 1 Vpp signal within 1 second, saving time and increasing work efficiency. The built-in fuzzy logic algorithm ensures high accuracy and automatically places the signal in the center of the screen, making analysis much easier.
Protection against damage
The oscilloscope uses built-in surge protection modules up to 400 V to prevent accidental damage to the device when measuring high-voltage signals, even if the probe is not set to 10X mode. This allows you to safely test power and high-voltage circuits.
Data storage and export
The FNIRSI 1013D offers an internal memory of 1 GB, which allows you to store up to 1,000 images and 1,000 waveform sets. This allows you to quickly save one-touch measurement results and export them via USB to a computer for further analysis. The waveform manager function allows you to view thumbnails of stored waveforms, zoom in, delete and analyze them with a cursor directly on the device - similar to a smartphone gallery, adding to the convenience of data management.
Advanced triggering functions
The oscilloscope offers a full set of trigger modes - Auto, Single and Normal. This arrangement allows you to test sudden pulsed ignition signals, IR remote control signals or sine wave signals depending on the selected mode, making the device a versatile diagnostic tool. You can also set the trigger edge (rising/falling) and trigger channel, allowing you to precisely capture the signal fragments of interest.
Included:
- FNIRSI 1013D portable touchscreen oscilloscope
- Probe (100 MHz) x2
- USB charger
- User manual
| Manufacturer | FNIRSI |
|---|---|
| Model | 1013D |
| Number of channels | 2 |
| LCD screen size | 7 inches |
| LCD resolution | 800 x 480 |
| Display technology | TFT |
| Bandwidth | 100 MHz |
| Sampling frequency | 1 GSa/s |
| Highest test voltage | 1X: 40V 10X: 400V |
| Cursor | XY position Trigger Y |
| Roll mode | Supported |
| Automatic one-button setting | Supported |
| Waveform storage | 1000 images + 1000 waveforms |
| Waveform manager | Supported |
| Voltage accuracy | ± 2% |
| Rise time | < 3 ns |
| Memory depth | 240 Kbit |
| Input resistance | 1 MΩ |
| Sensitivity | 50 mV ~ 500 V |
| Time base | 50 s ~ 10 ns |
| Trigger mode | Single / Normal / Auto |
| Trigger edge | Ascending / Descending |
| Coupling | AC / DC |
| Frequency accuracy | ±0,01% |
| Parameters | 12 types in total |
| Battery | Lithium with a capacity of 6000 mAh |
| Operating time | 4 hours |
| Expansion | USB export |
| Charging | USB-C 5V 2A/3A/4A |
| Dimensions | 184 x 124 x 50 mm |
Warranty: 24 months