xTool SafetyPro™ AP2 smoke canister
- Nosūtīšana šodien! Produkts ir pieejams mūsu noliktavā Somijā. Pasūtījumi tiek nosūtīti zibens ātrumā, parasti tajā pašā vai nākamajā darba dienā. Piegādes laiks ir atkarīgs no galamērķa valsts.
- Nosūtīšana 4–7 dienu laikā Produkts tiek nosūtīts no piegādātāja noliktavas un vispirms piegādāts mūsu noliktavai Somijā. Jūs saņemsiet izsekošanas saiti pa e-pastu, tiklīdz būsim nosūtījuši jūsu pasūtījumu no mūsu noliktavas, parasti 4–7 darba dienu laikā pēc pasūtījuma veikšanas.
- Nav noliktavā Produkts pašlaik nav pieejams. Lai iegūtu vairāk informācijas, lūdzu, nosūtiet ziņu mūsu klientu apkalpošanas dienestam.
Lūdzu, apskatiet mūsu Piegādes metožu un izmaksu lapa lai iegūtu vairāk informācijas.
Vai jums ir kādi jautājumi?
Mēs dodam priekšroku, lai jūs nosūtītu savu ziņu, izmantojot mūsu tiešraides tērzēšanu. Sazināšanās ar mums caur tērzēšanu ļauj mums redzēt produktu un lapu, kurā jūs pašlaik atrodaties, tāpēc mums būs ātrāk pārbaudīt produktu, kas jūs interesē.
Mēs varam jums palīdzēt nekavējoties, ja esam pieejami, ja esam aizņemti ar pasūtījumu komplektēšanu, mēs atgriezīsimies pie jums un sazināsimies ar jums pa e-pastu un tiešraides tērzēšanu.
Ja jums ir steidzami, varat atstāt savu ziņu ar kontakta formu.
Vai vēlaties veikt lielāku vairumtirdzniecības pasūtījumu? Vai vēlaties pieprasīt cenu piedāvājumu pielāgotam pasūtījumam?
Pieprasījums pēc piedāvājuma:
- Pievienojiet visus priekšmetus un daudzumus grozam
- Dodieties uz "Groza lapu" noklikšķinot uz šīs saites vai noklikšķiniet uz pogas "Sazinieties ar mums" slīdņa grozā.
- Lapas "Grozs" sadaļā varat noklikšķināt uz pogas "Sazināties ar mums" un nosūtīt ziņojumu un cenu pieprasījumu par groza precēm.
Apraksts
Produktu informācija
xTool SafetyPro™ AP2 Smoke Absorber
The xTool SafetyPro™ AP2 is a powerful smoke absorber that provides optimal air quality when working with laser engravers. With an advanced filtration system, it effectively removes harmful particles and odors, creating a safe and comfortable working environment. Whether you're using the xTool Laserbox, xTool M1, or xTool D1/D1 Pro with an enclosure, the AP2 works perfectly with any of these devices to guarantee the best results.
Powerful, three-stage filtration
The xTool SafetyPro™ AP2 is equipped with an advanced filtration system consisting of three layers. The pre-filter captures larger particulates, the middle filter removes up to 99.97% of microscopic particles as small as 0.03 μm, and the main filter effectively absorbs harmful gases and odors. In this way, the air remains clean and the risk of inhaling harmful substances is minimized.
Quiet operation for complete focus
With low noise emissions, the xTool SafetyPro™ AP2 allows you to work in a quiet environment without unnecessary distractions. The unit's quiet operation promotes concentration and keeps you comfortable, no matter how long the engraving process takes.
Sealed design and easy operation
The AP2's airtight housing prevents contaminants from escaping to the outside, ensuring that fresh air is kept in the room. In addition, replacing the filter is quick and easy - simply remove the cover, remove the used filter and insert a new filter set. This solution minimizes downtime and ensures that the device is always ready to work.
Mobility and compatibility
The xTool SafetyPro™ AP2 is compact and easy to carry, so you can easily place it where you need it most. The device is fully compatible with xTool's laser engravers, such as the Laserbox, M1 and D1/D1 Pro with case accessory. This makes the AP2 a versatile and practical addition to any workshop.
Create in a healthy environment
With the xTool SafetyPro™ AP2 canister, you can work without worrying about air quality. The device eliminates smoke and unpleasant odors, which significantly increases the comfort of your work and takes care of your health. No matter what type of material you are working with, the AP2 allows you to enjoy clean air and better efficiency.
Included
- P5010391 x1
- Filter set x1
- Pipe clamp x3
- Smoke exhaust pipe x1
- Screw set x1
- Power cable x1
- Pipe connector x2
- Wall connector x1
- Screwdrivers (Phillips and flathead) x2
- User manual x1
| Manufacturer | xTool |
|---|---|
| Model | P5010391 |
| Adapted machine | P2S, P2, S1, M1 Ultra, F1 Ultra, D1, M1, F1 |
| Product size | 290*491*542mm |
| Product weight | 20.7 kg |
| Control mode | Touch button, four adjustable gears |
| Pre-filtration system | Cyclone separation |
| Rated power | 220W |
| Filter layers | SuperCyclone filter, pre-filter, medium efficiency filter, activated carbon layer, extra dense carbon mesh, high efficiency filter |
| Noise | 55dB |
Warranty: 24 months
xTool SafetyPro™ AP2 Smoke Absorber
The xTool SafetyPro™ AP2 is a powerful smoke absorber that provides optimal air quality when working with laser engravers. With an advanced filtration system, it effectively removes harmful particles and odors, creating a safe and comfortable working environment. Whether you're using the xTool Laserbox, xTool M1, or xTool D1/D1 Pro with an enclosure, the AP2 works perfectly with any of these devices to guarantee the best results.
Powerful, three-stage filtration
The xTool SafetyPro™ AP2 is equipped with an advanced filtration system consisting of three layers. The pre-filter captures larger particulates, the middle filter removes up to 99.97% of microscopic particles as small as 0.03 μm, and the main filter effectively absorbs harmful gases and odors. In this way, the air remains clean and the risk of inhaling harmful substances is minimized.
Quiet operation for complete focus
With low noise emissions, the xTool SafetyPro™ AP2 allows you to work in a quiet environment without unnecessary distractions. The unit's quiet operation promotes concentration and keeps you comfortable, no matter how long the engraving process takes.
Sealed design and easy operation
The AP2's airtight housing prevents contaminants from escaping to the outside, ensuring that fresh air is kept in the room. In addition, replacing the filter is quick and easy - simply remove the cover, remove the used filter and insert a new filter set. This solution minimizes downtime and ensures that the device is always ready to work.
Mobility and compatibility
The xTool SafetyPro™ AP2 is compact and easy to carry, so you can easily place it where you need it most. The device is fully compatible with xTool's laser engravers, such as the Laserbox, M1 and D1/D1 Pro with case accessory. This makes the AP2 a versatile and practical addition to any workshop.
Create in a healthy environment
With the xTool SafetyPro™ AP2 canister, you can work without worrying about air quality. The device eliminates smoke and unpleasant odors, which significantly increases the comfort of your work and takes care of your health. No matter what type of material you are working with, the AP2 allows you to enjoy clean air and better efficiency.
Included
- P5010391 x1
- Filter set x1
- Pipe clamp x3
- Smoke exhaust pipe x1
- Screw set x1
- Power cable x1
- Pipe connector x2
- Wall connector x1
- Screwdrivers (Phillips and flathead) x2
- User manual x1
| Manufacturer | xTool |
|---|---|
| Model | P5010391 |
| Adapted machine | P2S, P2, S1, M1 Ultra, F1 Ultra, D1, M1, F1 |
| Product size | 290*491*542mm |
| Product weight | 20.7 kg |
| Control mode | Touch button, four adjustable gears |
| Pre-filtration system | Cyclone separation |
| Rated power | 220W |
| Filter layers | SuperCyclone filter, pre-filter, medium efficiency filter, activated carbon layer, extra dense carbon mesh, high efficiency filter |
| Noise | 55dB |
Warranty: 24 months