RainPoint Rain Sensor
- Vandaag verzonden! Het product is op voorraad in ons magazijn in Finland. Bestellingen worden meestal dezelfde of de volgende werkdag razendsnel verzonden. De levertijd hangt af van het bestemmingsland.
- Verzending binnen 4–7 dagen Het product wordt verzonden vanuit het magazijn van de leverancier en eerst geleverd aan ons magazijn in Finland. U ontvangt een trackinglink per e-mail zodra we uw bestelling vanuit ons magazijn hebben verzonden, meestal binnen 4–7 werkdagen na uw bestelling.
- Niet op voorraad Het product is momenteel niet beschikbaar. Stuur een bericht naar onze klantenservice voor meer informatie.
Bekijk alstublieft onze Pagina met verzendmethoden en kosten voor meer informatie.
Heeft u een vraag?
We geven er de voorkeur aan dat u uw bericht via onze livechat verstuurt. Contact met ons opnemen via de chat stelt ons in staat om het product en de pagina te zien waar u zich op dat moment bevindt, waardoor het voor ons sneller is om het product waarin u geïnteresseerd bent te controleren.
We kunnen u direct helpen als we beschikbaar zijn, als we bezig zijn met het inpakken van bestellingen nemen we contact met u op via e-mail en livechat.
Als u haast heeft, kunt u uw bericht achterlaten via het contactformulier.
Wilt u een grotere groothandelsbestelling plaatsen? Of wilt u een offerte aanvragen voor een aangepaste bestelling?
Aanvraag voor offerte:
- Voeg alle artikelen en hoeveelheden toe aan de winkelwagen
- Ga naar de "Winkelwagenpagina" door op deze link te klikken of klik op de knop "Contacteer ons" in de schuifwagen.
- Op de "Winkelwagenpagina" kunt u op de knop "Contact opnemen" klikken en een bericht en offerteaanvraag voor uw winkelwagenitems verzenden.
Beschrijving
Productinformatie
RainPoint Rain Sensor
The RainPoint Rain Sensor is a practical solution for automatic irrigation systems. It works by using a mechanism that detects rainfall and automatically stops watering when it detects more than 3 mm of rainfall. This saves water, avoids overwatering your plants and ensures that the system works only when needed. The product is compatible with most controllers with solenoid valves and fits standard garden installations.
Effective operation based on rainfall
The sensor keeps the circuit closed until it detects a certain level of rainfall. When more than 3 mm of rain hits the sensor's surface, the water-absorbing plate expands, immediately breaking the circuit and stopping watering. Once the sensor dries out, the circuit closes again and the system returns to normal operation. The entire process takes 2 to 5 minutes, ensuring quick response to changing weather conditions.
Simple installation to irrigation controllers
Connecting the RainPoint sensor is intuitive - just plug one wire into the C (common) port and the other into the R (sensor) port on the controller. Thanks to its compatibility with most models of solenoid valves, there is no need for additional adapters or installation modifications.
Adjustable drying time
The sensor is equipped with a vent ring that allows you to adjust the time it takes to turn the system back on after rainfall. The wider-open vents speed up the drying process, which can be useful in sunny and windy locations. Under standard conditions, the sensor returns to operation after about 4 hours, and takes up to 3 days to dry completely.
Quick test without water
The function to test operation does not require contact with water. Just press the protrusion on top of the housing - if the connection is correct, there will be a characteristic "click" of the solenoid valve, and watering will stop. This is a quick way to verify the correctness of the installation.
| Manufacturer | RainPoint |
|---|---|
| Model | RS-Y01 |
| Power supply | 24 VAC (Volts Alternating Current) |
| Contact load capacity | 5 A |
| Cable length | 5 m |
| Conductor cross section | 0.5 mm² |
| Cable type | 2-core, in protective sheath |
| Compatibility | Compatible with most irrigation controllers (normally open and normally closed) |
| Dimensions | 16 × 6 cm |
Warranty: 36 months
RainPoint Rain Sensor
The RainPoint Rain Sensor is a practical solution for automatic irrigation systems. It works by using a mechanism that detects rainfall and automatically stops watering when it detects more than 3 mm of rainfall. This saves water, avoids overwatering your plants and ensures that the system works only when needed. The product is compatible with most controllers with solenoid valves and fits standard garden installations.
Effective operation based on rainfall
The sensor keeps the circuit closed until it detects a certain level of rainfall. When more than 3 mm of rain hits the sensor's surface, the water-absorbing plate expands, immediately breaking the circuit and stopping watering. Once the sensor dries out, the circuit closes again and the system returns to normal operation. The entire process takes 2 to 5 minutes, ensuring quick response to changing weather conditions.
Simple installation to irrigation controllers
Connecting the RainPoint sensor is intuitive - just plug one wire into the C (common) port and the other into the R (sensor) port on the controller. Thanks to its compatibility with most models of solenoid valves, there is no need for additional adapters or installation modifications.
Adjustable drying time
The sensor is equipped with a vent ring that allows you to adjust the time it takes to turn the system back on after rainfall. The wider-open vents speed up the drying process, which can be useful in sunny and windy locations. Under standard conditions, the sensor returns to operation after about 4 hours, and takes up to 3 days to dry completely.
Quick test without water
The function to test operation does not require contact with water. Just press the protrusion on top of the housing - if the connection is correct, there will be a characteristic "click" of the solenoid valve, and watering will stop. This is a quick way to verify the correctness of the installation.
| Manufacturer | RainPoint |
|---|---|
| Model | RS-Y01 |
| Power supply | 24 VAC (Volts Alternating Current) |
| Contact load capacity | 5 A |
| Cable length | 5 m |
| Conductor cross section | 0.5 mm² |
| Cable type | 2-core, in protective sheath |
| Compatibility | Compatible with most irrigation controllers (normally open and normally closed) |
| Dimensions | 16 × 6 cm |
Warranty: 36 months