Jack Puluz tie microphone with clip PU426 1.5m 3.5mm Lightning
- Doručujeme dnes! Produkt je skladom v našom sklade vo Fínsku. Objednávky sú odosielané bleskovou rýchlosťou, zvyčajne v ten istý alebo nasledujúci pracovný deň. Doba doručenia závisí od cieľovej krajiny.
- Odosielame do 4–7 dní Produkt je odoslaný z dodávateľského skladu a najskôr doručený do nášho skladu vo Fínsku. Po odoslaní objednávky z nášho skladu vám e-mailom zašleme sledovací odkaz, zvyčajne do 4–7 pracovných dní od zadania objednávky.
- Momentálne nedostupné Produkt je momentálne nedostupný. Pre viac informácií pošlite správu nášmu zákazníckemu servisu.
Prosím, pozrite si náš Stránka s metódami a nákladmi na dopravu pre viac informácií.
Máte nejakú otázku?
Uprednostňujeme, aby ste nám poslali správu cez náš live chat. Kontaktovanie nás cez chat nám umožňuje vidieť produkt a stránku, na ktorej sa práve nachádzate, takže pre nás bude rýchlejšie skontrolovať produkt, o ktorý máte záujem.
Môžeme vám okamžite pomôcť, ak sme k dispozícii, ak sme zaneprázdnení balením objednávok, ozveme sa vám a kontaktujeme vás e-mailom a live chatom.
Ak sa ponáhľate, môžete nám zanechať správu cez kontaktný formulár.
Chceli by ste uskutočniť väčšiu veľkoobchodnú objednávku? Alebo by ste chceli požiadať o cenovú ponuku na zákazkovú objednávku?
Žiadosť o cenovú ponuku:
- Pridajte všetky položky a množstvá do košíka
- Prejdite na "Stránku košíka" kliknutím na tento odkaz alebo kliknite na tlačidlo "Kontaktujte nás" v posuvníku košíka.
- Na stránke "Košík" môžete kliknúť na tlačidlo "Kontaktujte nás" a odoslať správu a žiadosť o cenovú ponuku pre položky vo vašom košíku.
Popis
Informácie o produkte
Puluz tie microphone with clip PU426 1.5m 3.5mm Lightning
Puluz PU426 is a compact tie microphone with Lightning connector, which is great for recording interviews, podcasts, videos or online lessons. Thanks to the length of the 1.5-meter cable, you can operate the device freely, and the practical clip allows you to attach the microphone directly to your clothes. It's a versatile tool that works without additional batteries and works with iPhones and other devices with a Lightning port.
Clear sound and effective noise reduction
The PU426 uses active sound recording technology and a capacitive transducer to provide clear and natural sound. The built-in noise cancellation module minimizes ambient noise, making your voice sound clear even in less favorable conditions. The microphone captures audio at 360° and works best at a distance of up to 20 cm from the source - ideal, for example, for close-up recordings such as vlogs and interviews.
Durable construction and a set of accessories
The PU426 is made of durable materials - the PVC used and the shielded enamel cable provide resistance to damage and interference. In the set you will find a set of necessary accessories: two clips, two sponge covers and one deadcat wind shield, so that the microphone can also cope in the field. The whole set is packed in a handy carrying case, making it easy to transport and store the equipment.
Included
- Puluz PU426 microphone × 1
- Deadcat wind shield × 1
- Sponge cover × 2
- Attachment clip × 2
- Storage case × 1
| Manufacturer | Puluz |
|---|---|
| Manufacturer code | PU426 |
| Microphone type | Electret condenser microphone |
| Transducer size | 6.0 × 2.7 mm |
| Directional characteristics | Omnidirectional (dual capacitance) |
| Sensitivity | -34 dB ± 3 dB (0 dB = 1 Pa) |
| Frequency range | 20 Hz - 16,000 Hz |
| Signal-to-noise ratio | >60 dB SPL |
| Impedance | <2.2 kΩ |
| Cable length | 1,5 m |
| Connector type | Lightning (8 Pin) |
| Cable material | PVC, shielded enamel cable |
Warranty: 12 months
Puluz tie microphone with clip PU426 1.5m 3.5mm Lightning
Puluz PU426 is a compact tie microphone with Lightning connector, which is great for recording interviews, podcasts, videos or online lessons. Thanks to the length of the 1.5-meter cable, you can operate the device freely, and the practical clip allows you to attach the microphone directly to your clothes. It's a versatile tool that works without additional batteries and works with iPhones and other devices with a Lightning port.
Clear sound and effective noise reduction
The PU426 uses active sound recording technology and a capacitive transducer to provide clear and natural sound. The built-in noise cancellation module minimizes ambient noise, making your voice sound clear even in less favorable conditions. The microphone captures audio at 360° and works best at a distance of up to 20 cm from the source - ideal, for example, for close-up recordings such as vlogs and interviews.
Durable construction and a set of accessories
The PU426 is made of durable materials - the PVC used and the shielded enamel cable provide resistance to damage and interference. In the set you will find a set of necessary accessories: two clips, two sponge covers and one deadcat wind shield, so that the microphone can also cope in the field. The whole set is packed in a handy carrying case, making it easy to transport and store the equipment.
Included
- Puluz PU426 microphone × 1
- Deadcat wind shield × 1
- Sponge cover × 2
- Attachment clip × 2
- Storage case × 1
| Manufacturer | Puluz |
|---|---|
| Manufacturer code | PU426 |
| Microphone type | Electret condenser microphone |
| Transducer size | 6.0 × 2.7 mm |
| Directional characteristics | Omnidirectional (dual capacitance) |
| Sensitivity | -34 dB ± 3 dB (0 dB = 1 Pa) |
| Frequency range | 20 Hz - 16,000 Hz |
| Signal-to-noise ratio | >60 dB SPL |
| Impedance | <2.2 kΩ |
| Cable length | 1,5 m |
| Connector type | Lightning (8 Pin) |
| Cable material | PVC, shielded enamel cable |
Warranty: 12 months