RainPoint Rain Sensor
- Doručujeme dnes! Produkt je skladom v našom sklade vo Fínsku. Objednávky sú odosielané bleskovou rýchlosťou, zvyčajne v ten istý alebo nasledujúci pracovný deň. Doba doručenia závisí od cieľovej krajiny.
- Odosielame do 4–7 dní Produkt je odoslaný z dodávateľského skladu a najskôr doručený do nášho skladu vo Fínsku. Po odoslaní objednávky z nášho skladu vám e-mailom zašleme sledovací odkaz, zvyčajne do 4–7 pracovných dní od zadania objednávky.
- Momentálne nedostupné Produkt je momentálne nedostupný. Pre viac informácií pošlite správu nášmu zákazníckemu servisu.
Prosím, pozrite si náš Stránka s metódami a nákladmi na dopravu pre viac informácií.
Máte nejakú otázku?
Uprednostňujeme, aby ste nám poslali správu cez náš live chat. Kontaktovanie nás cez chat nám umožňuje vidieť produkt a stránku, na ktorej sa práve nachádzate, takže pre nás bude rýchlejšie skontrolovať produkt, o ktorý máte záujem.
Môžeme vám okamžite pomôcť, ak sme k dispozícii, ak sme zaneprázdnení balením objednávok, ozveme sa vám a kontaktujeme vás e-mailom a live chatom.
Ak sa ponáhľate, môžete nám zanechať správu cez kontaktný formulár.
Chceli by ste uskutočniť väčšiu veľkoobchodnú objednávku? Alebo by ste chceli požiadať o cenovú ponuku na zákazkovú objednávku?
Žiadosť o cenovú ponuku:
- Pridajte všetky položky a množstvá do košíka
- Prejdite na "Stránku košíka" kliknutím na tento odkaz alebo kliknite na tlačidlo "Kontaktujte nás" v posuvníku košíka.
- Na stránke "Košík" môžete kliknúť na tlačidlo "Kontaktujte nás" a odoslať správu a žiadosť o cenovú ponuku pre položky vo vašom košíku.
Popis
Informácie o produkte
RainPoint Rain Sensor
The RainPoint Rain Sensor is a practical solution for automatic irrigation systems. It works by using a mechanism that detects rainfall and automatically stops watering when it detects more than 3 mm of rainfall. This saves water, avoids overwatering your plants and ensures that the system works only when needed. The product is compatible with most controllers with solenoid valves and fits standard garden installations.
Effective operation based on rainfall
The sensor keeps the circuit closed until it detects a certain level of rainfall. When more than 3 mm of rain hits the sensor's surface, the water-absorbing plate expands, immediately breaking the circuit and stopping watering. Once the sensor dries out, the circuit closes again and the system returns to normal operation. The entire process takes 2 to 5 minutes, ensuring quick response to changing weather conditions.
Simple installation to irrigation controllers
Connecting the RainPoint sensor is intuitive - just plug one wire into the C (common) port and the other into the R (sensor) port on the controller. Thanks to its compatibility with most models of solenoid valves, there is no need for additional adapters or installation modifications.
Adjustable drying time
The sensor is equipped with a vent ring that allows you to adjust the time it takes to turn the system back on after rainfall. The wider-open vents speed up the drying process, which can be useful in sunny and windy locations. Under standard conditions, the sensor returns to operation after about 4 hours, and takes up to 3 days to dry completely.
Quick test without water
The function to test operation does not require contact with water. Just press the protrusion on top of the housing - if the connection is correct, there will be a characteristic "click" of the solenoid valve, and watering will stop. This is a quick way to verify the correctness of the installation.
| Manufacturer | RainPoint |
|---|---|
| Model | RS-Y01 |
| Power supply | 24 VAC (Volts Alternating Current) |
| Contact load capacity | 5 A |
| Cable length | 5 m |
| Conductor cross section | 0.5 mm² |
| Cable type | 2-core, in protective sheath |
| Compatibility | Compatible with most irrigation controllers (normally open and normally closed) |
| Dimensions | 16 × 6 cm |
Warranty: 36 months
RainPoint Rain Sensor
The RainPoint Rain Sensor is a practical solution for automatic irrigation systems. It works by using a mechanism that detects rainfall and automatically stops watering when it detects more than 3 mm of rainfall. This saves water, avoids overwatering your plants and ensures that the system works only when needed. The product is compatible with most controllers with solenoid valves and fits standard garden installations.
Effective operation based on rainfall
The sensor keeps the circuit closed until it detects a certain level of rainfall. When more than 3 mm of rain hits the sensor's surface, the water-absorbing plate expands, immediately breaking the circuit and stopping watering. Once the sensor dries out, the circuit closes again and the system returns to normal operation. The entire process takes 2 to 5 minutes, ensuring quick response to changing weather conditions.
Simple installation to irrigation controllers
Connecting the RainPoint sensor is intuitive - just plug one wire into the C (common) port and the other into the R (sensor) port on the controller. Thanks to its compatibility with most models of solenoid valves, there is no need for additional adapters or installation modifications.
Adjustable drying time
The sensor is equipped with a vent ring that allows you to adjust the time it takes to turn the system back on after rainfall. The wider-open vents speed up the drying process, which can be useful in sunny and windy locations. Under standard conditions, the sensor returns to operation after about 4 hours, and takes up to 3 days to dry completely.
Quick test without water
The function to test operation does not require contact with water. Just press the protrusion on top of the housing - if the connection is correct, there will be a characteristic "click" of the solenoid valve, and watering will stop. This is a quick way to verify the correctness of the installation.
| Manufacturer | RainPoint |
|---|---|
| Model | RS-Y01 |
| Power supply | 24 VAC (Volts Alternating Current) |
| Contact load capacity | 5 A |
| Cable length | 5 m |
| Conductor cross section | 0.5 mm² |
| Cable type | 2-core, in protective sheath |
| Compatibility | Compatible with most irrigation controllers (normally open and normally closed) |
| Dimensions | 16 × 6 cm |
Warranty: 36 months