Ancel BM700 OBD2 diagnostic scanner
- Pošiljka danes! Izdelek je na zalogi v našem skladišču na Finskem. Naročila običajno odpošljemo z bliskovito hitrostjo, ponavadi isti ali naslednji delovni dan. Čas dostave je odvisen od ciljne države.
- Pošiljka v 4–7 dneh Izdelek je poslan iz skladišča dobavitelja in najprej dostavljen v naše skladišče na Finskem. Ko bomo vaš naročilo odposlali iz našega skladišča, boste po e-pošti prejeli povezavo za sledenje, običajno v 4–7 delovnih dneh po naročilu.
- Ni na zalogi Izdelek trenutno ni na voljo. Za več informacij pošljite sporočilo naši službi za pomoč strankam.
Prosimo, oglejte si našo Stran o načinih pošiljanja in stroških za več informacij.
Imate kakšno vprašanje?
Raje imamo, da nam pošljete sporočilo preko našega klepeta v živo. Kontaktiranje preko klepeta nam omogoča, da vidimo izdelek in stran, na kateri ste trenutno, zato nam bo lažje in hitreje preveriti izdelek, ki vas zanima.
Pomagamo vam lahko takoj, če smo na voljo, če pa smo zaposleni s pakiranjem naročil, vam bomo odgovorili in vas kontaktirali preko e-pošte in klepeta v živo.
Če ste v naglici, lahko svoje sporočilo pustite preko kontaktnega obrazca.
Želite oddati večje veleprodajno naročilo? Ali želite zahtevati ponudbo za naročilo po meri?
Zahteva za ponudbo:
- Dodajte vse izdelke in količine v košarico
- Pojdite na "Stran s košarico" s klikom na to povezavo ali kliknite gumb "Kontaktirajte nas" v drsniku košarice.
- Na strani "Košarica" lahko kliknete gumb "Kontaktirajte nas" in pošljete sporočilo ter zahtevo za ponudbo za izdelke v vaši košarici.
Opis
Informacije o izdelku
Ancel BM700 OBD2 diagnostic scanner
With the Ancel BM700 in hand, you can forget about expensive service visits. This multifunctional diagnostic scanner was created with BMW, MINI and Rolls-Royce owners in mind, offering them exactly the same functions that until recently were reserved exclusively for workshops and authorized service centers. Thanks to the powerful OBD2 functionality and advanced diagnostics dedicated to BMW vehicles, you gain full control over the technical condition of your car - quickly, easily and without leaving your garage.
Diagnostics for all BMW systems
The Ancel BM700 combines the functions of a full system scanner and a classic OBD2 tester. This means you can diagnose all the vehicle's systems - from the engine, ABS, SRS, transmission, TPMS, ESP, SAS systems to the immobilizer and battery. The device allows you to read and clear fault codes, monitor vehicle performance in real time, I/M readiness test, fuel evaporation system (EVAP) test and access vehicle information (VIN, calibrations). For BMW, it works reliably with both modern models and older E30, E36 or E34 series vehicles.
Service functions in your garage
The BM700 allows you to do much more than read errors. The device offers an extensive set of service functions, such as resetting CBS inspection indicators, transmission and engine adaptations, throttle reset, fuel pump adjustment and registering a new battery. You can also regenerate the DPF filter, calibrate the steering angle sensor (SAS), reset ABS/DSC systems and code injectors. Importantly, you will perform all operations intuitively, thanks to a clear menu and an easy-to-read LCD screen.
OBD2 compatibility
Although the BM700 was designed with BMW vehicles in mind, the device will also work perfectly as a classic OBD2 scanner for other brands. Thanks to universal protocols, you can read engine faults, analyze data and monitor exhaust emissions on cars from other manufacturers as well - from Ford to Toyota. This makes the BM700 a multi-purpose tool that will work well in any workshop, garage and in the hands of any automotive enthusiast.
| Manufacturer | Ancel |
|---|---|
| Model | BM700 |
| Type of device | Diagnostic OBD2 scanner with full support for BMW systems |
| Compatibility | BMW, MINI, Rolls-Royce, OBD2 vehicles (engine) |
| Supported OBD2 functions | Error code reading, Error code clearing, I/M readiness test, Live data reading, EVAP system test, Vehicle information |
| Special functions for BMW | Engine, transmission, ABS, airbags and ESP diagnostics, Periodic inspection indicator reset, CBS (Condition Based Service) reset and correction, DME/DDE special functions, Battery registration (BMS), Steering angle sensor (SAS) calibration, Parking brake reset (EPB), Transmission adaptations (EGS), Fuel Pump reset, Injector Coding, ECU reset |
| Display | Backlit, graphic |
| Control | Function buttons |
| Power supply | 12V from OBD socket |
| Updates | Free, lifetime |
Warranty: 12 months
Ancel BM700 OBD2 diagnostic scanner
With the Ancel BM700 in hand, you can forget about expensive service visits. This multifunctional diagnostic scanner was created with BMW, MINI and Rolls-Royce owners in mind, offering them exactly the same functions that until recently were reserved exclusively for workshops and authorized service centers. Thanks to the powerful OBD2 functionality and advanced diagnostics dedicated to BMW vehicles, you gain full control over the technical condition of your car - quickly, easily and without leaving your garage.
Diagnostics for all BMW systems
The Ancel BM700 combines the functions of a full system scanner and a classic OBD2 tester. This means you can diagnose all the vehicle's systems - from the engine, ABS, SRS, transmission, TPMS, ESP, SAS systems to the immobilizer and battery. The device allows you to read and clear fault codes, monitor vehicle performance in real time, I/M readiness test, fuel evaporation system (EVAP) test and access vehicle information (VIN, calibrations). For BMW, it works reliably with both modern models and older E30, E36 or E34 series vehicles.
Service functions in your garage
The BM700 allows you to do much more than read errors. The device offers an extensive set of service functions, such as resetting CBS inspection indicators, transmission and engine adaptations, throttle reset, fuel pump adjustment and registering a new battery. You can also regenerate the DPF filter, calibrate the steering angle sensor (SAS), reset ABS/DSC systems and code injectors. Importantly, you will perform all operations intuitively, thanks to a clear menu and an easy-to-read LCD screen.
OBD2 compatibility
Although the BM700 was designed with BMW vehicles in mind, the device will also work perfectly as a classic OBD2 scanner for other brands. Thanks to universal protocols, you can read engine faults, analyze data and monitor exhaust emissions on cars from other manufacturers as well - from Ford to Toyota. This makes the BM700 a multi-purpose tool that will work well in any workshop, garage and in the hands of any automotive enthusiast.
| Manufacturer | Ancel |
|---|---|
| Model | BM700 |
| Type of device | Diagnostic OBD2 scanner with full support for BMW systems |
| Compatibility | BMW, MINI, Rolls-Royce, OBD2 vehicles (engine) |
| Supported OBD2 functions | Error code reading, Error code clearing, I/M readiness test, Live data reading, EVAP system test, Vehicle information |
| Special functions for BMW | Engine, transmission, ABS, airbags and ESP diagnostics, Periodic inspection indicator reset, CBS (Condition Based Service) reset and correction, DME/DDE special functions, Battery registration (BMS), Steering angle sensor (SAS) calibration, Parking brake reset (EPB), Transmission adaptations (EGS), Fuel Pump reset, Injector Coding, ECU reset |
| Display | Backlit, graphic |
| Control | Function buttons |
| Power supply | 12V from OBD socket |
| Updates | Free, lifetime |
Warranty: 12 months