FNIRSI CTG-20 paint thickness meter
- Pošiljka danes! Izdelek je na zalogi v našem skladišču na Finskem. Naročila običajno odpošljemo z bliskovito hitrostjo, ponavadi isti ali naslednji delovni dan. Čas dostave je odvisen od ciljne države.
- Pošiljka v 4–7 dneh Izdelek je poslan iz skladišča dobavitelja in najprej dostavljen v naše skladišče na Finskem. Ko bomo vaš naročilo odposlali iz našega skladišča, boste po e-pošti prejeli povezavo za sledenje, običajno v 4–7 delovnih dneh po naročilu.
- Ni na zalogi Izdelek trenutno ni na voljo. Za več informacij pošljite sporočilo naši službi za pomoč strankam.
Prosimo, oglejte si našo Stran o načinih pošiljanja in stroških za več informacij.
Imate kakšno vprašanje?
Raje imamo, da nam pošljete sporočilo preko našega klepeta v živo. Kontaktiranje preko klepeta nam omogoča, da vidimo izdelek in stran, na kateri ste trenutno, zato nam bo lažje in hitreje preveriti izdelek, ki vas zanima.
Pomagamo vam lahko takoj, če smo na voljo, če pa smo zaposleni s pakiranjem naročil, vam bomo odgovorili in vas kontaktirali preko e-pošte in klepeta v živo.
Če ste v naglici, lahko svoje sporočilo pustite preko kontaktnega obrazca.
Želite oddati večje veleprodajno naročilo? Ali želite zahtevati ponudbo za naročilo po meri?
Zahteva za ponudbo:
- Dodajte vse izdelke in količine v košarico
- Pojdite na "Stran s košarico" s klikom na to povezavo ali kliknite gumb "Kontaktirajte nas" v drsniku košarice.
- Na strani "Košarica" lahko kliknete gumb "Kontaktirajte nas" in pošljete sporočilo ter zahtevo za ponudbo za izdelke v vaši košarici.
Opis
Informacije o izdelku
FNIRSI CTG-20 paint thickness meter
FNIRSI CTG-20 is an advanced paint thickness meter that combines high sensitivity, precision and convenient operation. With the ability to automatically recognize the substrate (Fe / NFe / Fe+Zn), the device provides reliable results under all conditions. With a compact design weighing just 85 grams, it fits in your pocket and is always ready to go - just one touch to get an accurate measurement in seconds.
Multitasking and accuracy
The CTG-20 offers full support for three types of materials - iron, aluminum and zinc. Equipped with a highly sensitive probe with a resolution of 0.1 µm and a measurement range of up to 1,400 µm, the meter automatically identifies the substrate and uses electromagnetic induction and eddy currents to precisely measure coating thickness. With two measurement modes (single and continuous), you can adapt the way you work to your specific situation, and the results (current, maximum, minimum and average) are clearly displayed on the screen.
Metallic putty detection
The CTG-20 is an innovation in detecting hidden sheet metal repairs. The device can detect not only metal or primer, but also modern iron filing putty, which is designed to fool traditional gauges. With this feature, you gain confidence that the car was not masked with hard-to-detect repair layers.
Convenient operation and quick calibration
The device was designed with ease of use in mind. The quick calibration function allows you to zero the measurement with a single button, simply apply the probe to the supplied standard and press "ZERO." Intuitive operation also allows you to quickly switch measurement units (µm / mil), and automatic screen rotation makes it adapt to your position.
Compact design, long operating time
The CTG-20 meter is distinguished by its lightweight design (only 115 mm long) and ergonomic handle for one-handed operation. The built-in 600 mAh lithium battery charged via USB-C connector provides up to 8 hours of operation on a single charge. An auto shut-off function after 5 minutes of inactivity extends battery life and saves power.
Included
- paint thickness gauge
- charging cable
- user manual
| Manufacturer | FNIRSI |
|---|---|
| Model | CTG-20 |
| Dimensions | 48 x 18 x 115 mm |
| Measuring range | 0-1400um |
| Accuracy | ±3%+2um |
| Resolution factor | 0.1um |
| Calibration | Zero point calibration, multi-point calibration |
| Supported units | Um, mil |
| Minimum radius of convex curvature | 5 mm |
| Minimum radius of concave curvature | 25 mm |
| Minimum diameter of the measuring area | 20 mm |
| Working environment | Avoid strong magnetic fields, temperature from -10 ℃ to -50 ℃, humidity from 20% to 90% RH |
| Rechargeable battery | 600 mAh |
| Size | 115 x 48 x 18 mm |
| Weight | 83 g |
Warranty: 24 months
FNIRSI CTG-20 paint thickness meter
FNIRSI CTG-20 is an advanced paint thickness meter that combines high sensitivity, precision and convenient operation. With the ability to automatically recognize the substrate (Fe / NFe / Fe+Zn), the device provides reliable results under all conditions. With a compact design weighing just 85 grams, it fits in your pocket and is always ready to go - just one touch to get an accurate measurement in seconds.
Multitasking and accuracy
The CTG-20 offers full support for three types of materials - iron, aluminum and zinc. Equipped with a highly sensitive probe with a resolution of 0.1 µm and a measurement range of up to 1,400 µm, the meter automatically identifies the substrate and uses electromagnetic induction and eddy currents to precisely measure coating thickness. With two measurement modes (single and continuous), you can adapt the way you work to your specific situation, and the results (current, maximum, minimum and average) are clearly displayed on the screen.
Metallic putty detection
The CTG-20 is an innovation in detecting hidden sheet metal repairs. The device can detect not only metal or primer, but also modern iron filing putty, which is designed to fool traditional gauges. With this feature, you gain confidence that the car was not masked with hard-to-detect repair layers.
Convenient operation and quick calibration
The device was designed with ease of use in mind. The quick calibration function allows you to zero the measurement with a single button, simply apply the probe to the supplied standard and press "ZERO." Intuitive operation also allows you to quickly switch measurement units (µm / mil), and automatic screen rotation makes it adapt to your position.
Compact design, long operating time
The CTG-20 meter is distinguished by its lightweight design (only 115 mm long) and ergonomic handle for one-handed operation. The built-in 600 mAh lithium battery charged via USB-C connector provides up to 8 hours of operation on a single charge. An auto shut-off function after 5 minutes of inactivity extends battery life and saves power.
Included
- paint thickness gauge
- charging cable
- user manual
| Manufacturer | FNIRSI |
|---|---|
| Model | CTG-20 |
| Dimensions | 48 x 18 x 115 mm |
| Measuring range | 0-1400um |
| Accuracy | ±3%+2um |
| Resolution factor | 0.1um |
| Calibration | Zero point calibration, multi-point calibration |
| Supported units | Um, mil |
| Minimum radius of convex curvature | 5 mm |
| Minimum radius of concave curvature | 25 mm |
| Minimum diameter of the measuring area | 20 mm |
| Working environment | Avoid strong magnetic fields, temperature from -10 ℃ to -50 ℃, humidity from 20% to 90% RH |
| Rechargeable battery | 600 mAh |
| Size | 115 x 48 x 18 mm |
| Weight | 83 g |
Warranty: 24 months