FNIRSI index humidity meter WMT-10 hygrometer
- Pošiljka danes! Izdelek je na zalogi v našem skladišču na Finskem. Naročila običajno odpošljemo z bliskovito hitrostjo, ponavadi isti ali naslednji delovni dan. Čas dostave je odvisen od ciljne države.
- Pošiljka v 4–7 dneh Izdelek je poslan iz skladišča dobavitelja in najprej dostavljen v naše skladišče na Finskem. Ko bomo vaš naročilo odposlali iz našega skladišča, boste po e-pošti prejeli povezavo za sledenje, običajno v 4–7 delovnih dneh po naročilu.
- Ni na zalogi Izdelek trenutno ni na voljo. Za več informacij pošljite sporočilo naši službi za pomoč strankam.
Prosimo, oglejte si našo Stran o načinih pošiljanja in stroških za več informacij.
Imate kakšno vprašanje?
Raje imamo, da nam pošljete sporočilo preko našega klepeta v živo. Kontaktiranje preko klepeta nam omogoča, da vidimo izdelek in stran, na kateri ste trenutno, zato nam bo lažje in hitreje preveriti izdelek, ki vas zanima.
Pomagamo vam lahko takoj, če smo na voljo, če pa smo zaposleni s pakiranjem naročil, vam bomo odgovorili in vas kontaktirali preko e-pošte in klepeta v živo.
Če ste v naglici, lahko svoje sporočilo pustite preko kontaktnega obrazca.
Želite oddati večje veleprodajno naročilo? Ali želite zahtevati ponudbo za naročilo po meri?
Zahteva za ponudbo:
- Dodajte vse izdelke in količine v košarico
- Pojdite na "Stran s košarico" s klikom na to povezavo ali kliknite gumb "Kontaktirajte nas" v drsniku košarice.
- Na strani "Košarica" lahko kliknete gumb "Kontaktirajte nas" in pošljete sporočilo ter zahtevo za ponudbo za izdelke v vaši košarici.
Opis
Informacije o izdelku
FNIRSI WMT-10 indicative moisture meter hygrometer
The FNIRSI WMT-10 is an advanced, non-invasive moisture meter that provides fast and accurate readings without puncturing surfaces. Thanks to its induction technology and four measurement modes, it will work well with wood, as well as for testing walls, floors or building materials. High resolution (0.1%) and a wide measurement range of up to 75% allow precise results in just seconds. The large 2.4" TFT color screen ensures readability even in dark rooms, and the built-in flashlight further supports work in difficult conditions.
Measurement on any surface - 4 modes of operation
The WMT-10 offers four dedicated modes, including Softwood Mode for softwood (beech, spruce, birch, cherry, etc.), Hardwood Mode for hardwood (teak, walnut, ash, oak, etc.), Masonry Mode for masonry surfaces (brick, stone, compacted ground), and Powdered Wall Mode for plaster and concrete (lime walls, ceilings, floors). Each mode has been programmed with a corresponding measurement range - up to 75% moisture at a measurement depth of 17 mm.
Advanced measurement functions
The meter features a highly sensitive electromagnetic wave sensor and an extra-wide 40.5 × 40.5 cm measuring panel. The device offers light and audible alarms when the limits are exceeded, a HOLD function to stop the reading, and memory for up to 30 measurements. This allows you to easily compare results and return to previous readings at any time.
Durable design and convenient operation
The FNIRSI WMT-10 is not only about functionality, but also about refined ergonomics. The case with a non-slip finish and silicone coating fits well in the hand, and the soft plastic buttons make it easy to operate. The built-in 1,000 mAh battery with USB-C charging ensures long use and can be set to automatically turn off after 5, 10 or 15 minutes. The compact size makes the meter easy to fit in a tool bag.
Versatile applications
The FNIRSI WMT-10 will prove useful for measuring the moisture content of wood, paper, plaster, cement, plaster, concrete or brick. It is an indispensable tool for professionals in the construction, renovation, carpentry and finishing trades - anywhere where accuracy of measurement and not disturbing the surface under test are crucial.
The set includes
- moisture meter
- Type-C cable
- user manual
| Manufacturer | FNIRSI |
|---|---|
| Model | WMT-10 |
| Display | 2.4-inch color TFT screen |
| Screen resolution | 0.1% |
| Maximum detection depth | 17 mm |
| Sensor dimensions | 40.5 x 40.5 mm |
| Working temperature | 0~40°C |
| Measurement range | Gypsum wall: 0-25%, brick wall: 0-43%, soft wood: 0-75%, hard wood: 0-75% |
| Maximum measurement range | 0-75% |
| Error range | ±1.5% |
| Power source | Lithium rechargeable battery with 1000 mAh capacity |
Warranty: 24 months
FNIRSI WMT-10 indicative moisture meter hygrometer
The FNIRSI WMT-10 is an advanced, non-invasive moisture meter that provides fast and accurate readings without puncturing surfaces. Thanks to its induction technology and four measurement modes, it will work well with wood, as well as for testing walls, floors or building materials. High resolution (0.1%) and a wide measurement range of up to 75% allow precise results in just seconds. The large 2.4" TFT color screen ensures readability even in dark rooms, and the built-in flashlight further supports work in difficult conditions.
Measurement on any surface - 4 modes of operation
The WMT-10 offers four dedicated modes, including Softwood Mode for softwood (beech, spruce, birch, cherry, etc.), Hardwood Mode for hardwood (teak, walnut, ash, oak, etc.), Masonry Mode for masonry surfaces (brick, stone, compacted ground), and Powdered Wall Mode for plaster and concrete (lime walls, ceilings, floors). Each mode has been programmed with a corresponding measurement range - up to 75% moisture at a measurement depth of 17 mm.
Advanced measurement functions
The meter features a highly sensitive electromagnetic wave sensor and an extra-wide 40.5 × 40.5 cm measuring panel. The device offers light and audible alarms when the limits are exceeded, a HOLD function to stop the reading, and memory for up to 30 measurements. This allows you to easily compare results and return to previous readings at any time.
Durable design and convenient operation
The FNIRSI WMT-10 is not only about functionality, but also about refined ergonomics. The case with a non-slip finish and silicone coating fits well in the hand, and the soft plastic buttons make it easy to operate. The built-in 1,000 mAh battery with USB-C charging ensures long use and can be set to automatically turn off after 5, 10 or 15 minutes. The compact size makes the meter easy to fit in a tool bag.
Versatile applications
The FNIRSI WMT-10 will prove useful for measuring the moisture content of wood, paper, plaster, cement, plaster, concrete or brick. It is an indispensable tool for professionals in the construction, renovation, carpentry and finishing trades - anywhere where accuracy of measurement and not disturbing the surface under test are crucial.
The set includes
- moisture meter
- Type-C cable
- user manual
| Manufacturer | FNIRSI |
|---|---|
| Model | WMT-10 |
| Display | 2.4-inch color TFT screen |
| Screen resolution | 0.1% |
| Maximum detection depth | 17 mm |
| Sensor dimensions | 40.5 x 40.5 mm |
| Working temperature | 0~40°C |
| Measurement range | Gypsum wall: 0-25%, brick wall: 0-43%, soft wood: 0-75%, hard wood: 0-75% |
| Maximum measurement range | 0-75% |
| Error range | ±1.5% |
| Power source | Lithium rechargeable battery with 1000 mAh capacity |
Warranty: 24 months