Habotest HT609PRO Gas Leak Detector
- Pošiljka danes! Izdelek je na zalogi v našem skladišču na Finskem. Naročila običajno odpošljemo z bliskovito hitrostjo, ponavadi isti ali naslednji delovni dan. Čas dostave je odvisen od ciljne države.
- Pošiljka v 4–7 dneh Izdelek je poslan iz skladišča dobavitelja in najprej dostavljen v naše skladišče na Finskem. Ko bomo vaš naročilo odposlali iz našega skladišča, boste po e-pošti prejeli povezavo za sledenje, običajno v 4–7 delovnih dneh po naročilu.
- Ni na zalogi Izdelek trenutno ni na voljo. Za več informacij pošljite sporočilo naši službi za pomoč strankam.
Prosimo, oglejte si našo Stran o načinih pošiljanja in stroških za več informacij.
Imate kakšno vprašanje?
Raje imamo, da nam pošljete sporočilo preko našega klepeta v živo. Kontaktiranje preko klepeta nam omogoča, da vidimo izdelek in stran, na kateri ste trenutno, zato nam bo lažje in hitreje preveriti izdelek, ki vas zanima.
Pomagamo vam lahko takoj, če smo na voljo, če pa smo zaposleni s pakiranjem naročil, vam bomo odgovorili in vas kontaktirali preko e-pošte in klepeta v živo.
Če ste v naglici, lahko svoje sporočilo pustite preko kontaktnega obrazca.
Želite oddati večje veleprodajno naročilo? Ali želite zahtevati ponudbo za naročilo po meri?
Zahteva za ponudbo:
- Dodajte vse izdelke in količine v košarico
- Pojdite na "Stran s košarico" s klikom na to povezavo ali kliknite gumb "Kontaktirajte nas" v drsniku košarice.
- Na strani "Košarica" lahko kliknete gumb "Kontaktirajte nas" in pošljete sporočilo ter zahtevo za ponudbo za izdelke v vaši košarici.
Opis
Informacije o izdelku
Habotest HT609PRO Gas Leak Detector
The Habotest HT609PRO sensor will provide you with fast and accurate leak detection. Among other things, the device recognizes methane, propane, butane, carbon monoxide, ammonia, acetylene, acetone, benzene, hydrogen, ethanol, kerosene, solvent and many others, allowing you to effectively monitor safety at home, work, workshop or laboratory. It also allows accurate measurement of gas concentration in PPM units. A color LCD display with an intuitive bar graph, a 1.5-meter telescopic probe and a dual alarm system (sound and light) make operation easy.
Precise detection
The device detects all LEL (Lower Explosive Limit) gases, i.e. substances that can become explosive when they exceed a certain concentration in the air. Thanks to its wide detection range (50-1000 PPM) and fast response time (2-5 seconds), the Habotest HT609PRO sensor allows immediate detection of danger.
Telescopic probe
Thanks to its flexible 1.5-meter-long probe, the sensor allows you to check hard-to-reach areas without using a ladder or dismantling the installation. The Habotest HT609PRO is ideal for inspecting gas installations in buildings and LPG systems in vehicles, ensuring convenience and safety of use.
Sensitivity adjustment
The detector offers a three-stage sensitivity adjustment, so you can adapt its performance to your environment. The high sensitivity mode detects already minimal amounts of gas, while the low sensitivity mode eliminates interference in environments with higher gas concentrations. An audible alarm sounds depending on the sensitivity setting - from the second to the eighth bar of the chart.
Safety and convenience
The Habotest HT609PRO warns of gas detection with an audible and light signal. The color LCD screen displays measurements in an easy-to-read graphical form, allowing easy interpretation of the results. A low battery indicator reminds you to replace the battery. You'll power the device with 3 AAA batteries, which are included in the package.
Durable design
Thanks to its compact and ergonomic design, the sensor fits perfectly in your hand. It is made of durable materials to ensure resistance to damage and wear. The automatic shut-off function after 5 minutes of inactivity extends the device's working time.
Included:
- Habotest HT609PRO gas leak detector
- Protective bag for storage
- AAA battery x3
- User manual
| Manufacturer | Habotest |
|---|---|
| Manufacturer code | HT609PRO |
| Range | approximately 50 ~ 1000ppm (methane) |
| Sensitivity | > 50 PPM (methane) |
| Extendable probe | Yes, 1.5m |
| Test gases (partial list) | Acetone, acetylene, alcohol, ammonia, benzene, butane, ethanol, oxirane, gasoline, hexane, hydrogen, methane, gasoline, kerosene, natural gas, paint thinners, propane, solvents, etc. |
| Start-up time | approximately 30 seconds |
| Response time | <= 500ppm: approx. 5s; >500ppm: approx. 2s |
| Alarm mode | Audible and light |
| Automatic power off | yes |
| Power supply | 3 x 1.5V AAA battery |
| Working temperature | 0 to 50°C |
| Working humidity | 20 to 80% |
| Storage temperature | -10 to 60°C |
| Storage humidity | 20 to 80% |
Warranty: 12 months
Habotest HT609PRO Gas Leak Detector
The Habotest HT609PRO sensor will provide you with fast and accurate leak detection. Among other things, the device recognizes methane, propane, butane, carbon monoxide, ammonia, acetylene, acetone, benzene, hydrogen, ethanol, kerosene, solvent and many others, allowing you to effectively monitor safety at home, work, workshop or laboratory. It also allows accurate measurement of gas concentration in PPM units. A color LCD display with an intuitive bar graph, a 1.5-meter telescopic probe and a dual alarm system (sound and light) make operation easy.
Precise detection
The device detects all LEL (Lower Explosive Limit) gases, i.e. substances that can become explosive when they exceed a certain concentration in the air. Thanks to its wide detection range (50-1000 PPM) and fast response time (2-5 seconds), the Habotest HT609PRO sensor allows immediate detection of danger.
Telescopic probe
Thanks to its flexible 1.5-meter-long probe, the sensor allows you to check hard-to-reach areas without using a ladder or dismantling the installation. The Habotest HT609PRO is ideal for inspecting gas installations in buildings and LPG systems in vehicles, ensuring convenience and safety of use.
Sensitivity adjustment
The detector offers a three-stage sensitivity adjustment, so you can adapt its performance to your environment. The high sensitivity mode detects already minimal amounts of gas, while the low sensitivity mode eliminates interference in environments with higher gas concentrations. An audible alarm sounds depending on the sensitivity setting - from the second to the eighth bar of the chart.
Safety and convenience
The Habotest HT609PRO warns of gas detection with an audible and light signal. The color LCD screen displays measurements in an easy-to-read graphical form, allowing easy interpretation of the results. A low battery indicator reminds you to replace the battery. You'll power the device with 3 AAA batteries, which are included in the package.
Durable design
Thanks to its compact and ergonomic design, the sensor fits perfectly in your hand. It is made of durable materials to ensure resistance to damage and wear. The automatic shut-off function after 5 minutes of inactivity extends the device's working time.
Included:
- Habotest HT609PRO gas leak detector
- Protective bag for storage
- AAA battery x3
- User manual
| Manufacturer | Habotest |
|---|---|
| Manufacturer code | HT609PRO |
| Range | approximately 50 ~ 1000ppm (methane) |
| Sensitivity | > 50 PPM (methane) |
| Extendable probe | Yes, 1.5m |
| Test gases (partial list) | Acetone, acetylene, alcohol, ammonia, benzene, butane, ethanol, oxirane, gasoline, hexane, hydrogen, methane, gasoline, kerosene, natural gas, paint thinners, propane, solvents, etc. |
| Start-up time | approximately 30 seconds |
| Response time | <= 500ppm: approx. 5s; >500ppm: approx. 2s |
| Alarm mode | Audible and light |
| Automatic power off | yes |
| Power supply | 3 x 1.5V AAA battery |
| Working temperature | 0 to 50°C |
| Working humidity | 20 to 80% |
| Storage temperature | -10 to 60°C |
| Storage humidity | 20 to 80% |
Warranty: 12 months