HiFiMAN GA-10 headphone amplifier
- Pošiljka danes! Izdelek je na zalogi v našem skladišču na Finskem. Naročila običajno odpošljemo z bliskovito hitrostjo, ponavadi isti ali naslednji delovni dan. Čas dostave je odvisen od ciljne države.
- Pošiljka v 4–7 dneh Izdelek je poslan iz skladišča dobavitelja in najprej dostavljen v naše skladišče na Finskem. Ko bomo vaš naročilo odposlali iz našega skladišča, boste po e-pošti prejeli povezavo za sledenje, običajno v 4–7 delovnih dneh po naročilu.
- Ni na zalogi Izdelek trenutno ni na voljo. Za več informacij pošljite sporočilo naši službi za pomoč strankam.
Prosimo, oglejte si našo Stran o načinih pošiljanja in stroških za več informacij.
Imate kakšno vprašanje?
Raje imamo, da nam pošljete sporočilo preko našega klepeta v živo. Kontaktiranje preko klepeta nam omogoča, da vidimo izdelek in stran, na kateri ste trenutno, zato nam bo lažje in hitreje preveriti izdelek, ki vas zanima.
Pomagamo vam lahko takoj, če smo na voljo, če pa smo zaposleni s pakiranjem naročil, vam bomo odgovorili in vas kontaktirali preko e-pošte in klepeta v živo.
Če ste v naglici, lahko svoje sporočilo pustite preko kontaktnega obrazca.
Želite oddati večje veleprodajno naročilo? Ali želite zahtevati ponudbo za naročilo po meri?
Zahteva za ponudbo:
- Dodajte vse izdelke in količine v košarico
- Pojdite na "Stran s košarico" s klikom na to povezavo ali kliknite gumb "Kontaktirajte nas" v drsniku košarice.
- Na strani "Košarica" lahko kliknete gumb "Kontaktirajte nas" in pošljete sporočilo ter zahtevo za ponudbo za izdelke v vaši košarici.
Opis
Informacije o izdelku
HiFiMAN GA-10 headphone amplifier
HiFiMAN GA-10 is an anniversary headphone amplifier, designed for lovers of the highest quality sound. It uses carefully selected ECC83 and EL84 vacuum tubes, which provide exceptional clarity and warmth of sound. The device is distinguished by its advanced design and excellent acoustic performance, meeting the expectations of the most demanding audiophiles.
Advanced SEPP architecture
The GA-10 is based on SEPP (Single-Ended Push-Pull) architecture, which guarantees precise sound reproduction and minimal harmonic distortion. The amplifier combines tube warmth with cutting-edge technology to provide a rich, spacious musical stage. Such a solution allows you to enjoy both subtle details and dynamic parts of music.
Versatile headphone outputs
The amplifier offers three types of headphone outputs: 4-Pin XLR, 4.4mm balanced and 6.35mm single-ended. This allows the user to adapt the interface to different headphone models for flexibility and convenience. A built-in impedance switch allows perfect matching to headphones with impedances above and below 32 ohms, optimizing listening quality.
Analog signal inputs
The GA-10 features two analog signal inputs: XLR and RCA. The INPUT switch on the front panel allows you to easily select the appropriate audio source. Such a solution allows the amplifier to integrate with a variety of audio devices, from classic CD players to modern DACs.
Precise volume control
The amplifier features a high-quality ALPS-branded volume potentiometer, which ensures smooth and precise adjustment of the sound level. This gives the user full control over the sound, allowing you to adjust it to your preferences and the characteristics of your headphones.
High power and performance
The GA-10 delivers 3,000 mW of power at 300 ohm impedance and 600 mW at 32 ohm, allowing it to handle even the most demanding headphones. The device guarantees dynamic sound, deep bass and detailed treble, regardless of the music genre.
Robust construction and efficient cooling
The amplifier's chassis is made of high-quality materials that ensure durability and aesthetics. Special vents on the sides and top of the unit effectively dissipate heat, ensuring stable operation even during long listening sessions.
Unique features of tube amplifier
As a tube amplifier, the GA-10 operates at a high voltage and generates a higher temperature, which is characteristic of this type of device. For safety, it is recommended to use the amplifier in well-ventilated conditions and not to exceed 24 hours of continuous operation. Such attention to design details ensures the long life of the device.
Compact dimensions and elegant design
Despite its advanced capabilities, the GA-10 stands out for its compact dimensions - 330 x 110 x 380 mm. Stylish design and refined details make the amplifier fit perfectly into any audiophile environment, becoming not only a functional, but also an aesthetic element of the sound system.
Included
- HiFiMAN GA-10 amplifier x1
- Power cable x1
| Manufacturer | HiFiMAN |
|---|---|
| Model | GA-10 Amp |
| Analog signal input | XLR * 1 pair, RCA * 1 pair |
| Headphone output interface | 4-pin balanced*1, 4.4 balanced *1, 6.35mm single-ended *1 |
| Tube model | 12AX7/ECC83*4, 6P14/EL84*4 |
| Maximum input level | 3Vrms@RCA, 6Vrms@XLR, GAIN=3; |
| Frequency response | 20Hz-24KHz(±0.5dB@1KHz) |
| THD+N | 0.001%(2Vin, GAIN=1-3, @1KHz); |
| Output power | 3000MW/300Ω; 600MW/32Ω, @1KHz; |
| Dimensions | 330*110*380 |
Warranty: 24 months
HiFiMAN GA-10 headphone amplifier
HiFiMAN GA-10 is an anniversary headphone amplifier, designed for lovers of the highest quality sound. It uses carefully selected ECC83 and EL84 vacuum tubes, which provide exceptional clarity and warmth of sound. The device is distinguished by its advanced design and excellent acoustic performance, meeting the expectations of the most demanding audiophiles.
Advanced SEPP architecture
The GA-10 is based on SEPP (Single-Ended Push-Pull) architecture, which guarantees precise sound reproduction and minimal harmonic distortion. The amplifier combines tube warmth with cutting-edge technology to provide a rich, spacious musical stage. Such a solution allows you to enjoy both subtle details and dynamic parts of music.
Versatile headphone outputs
The amplifier offers three types of headphone outputs: 4-Pin XLR, 4.4mm balanced and 6.35mm single-ended. This allows the user to adapt the interface to different headphone models for flexibility and convenience. A built-in impedance switch allows perfect matching to headphones with impedances above and below 32 ohms, optimizing listening quality.
Analog signal inputs
The GA-10 features two analog signal inputs: XLR and RCA. The INPUT switch on the front panel allows you to easily select the appropriate audio source. Such a solution allows the amplifier to integrate with a variety of audio devices, from classic CD players to modern DACs.
Precise volume control
The amplifier features a high-quality ALPS-branded volume potentiometer, which ensures smooth and precise adjustment of the sound level. This gives the user full control over the sound, allowing you to adjust it to your preferences and the characteristics of your headphones.
High power and performance
The GA-10 delivers 3,000 mW of power at 300 ohm impedance and 600 mW at 32 ohm, allowing it to handle even the most demanding headphones. The device guarantees dynamic sound, deep bass and detailed treble, regardless of the music genre.
Robust construction and efficient cooling
The amplifier's chassis is made of high-quality materials that ensure durability and aesthetics. Special vents on the sides and top of the unit effectively dissipate heat, ensuring stable operation even during long listening sessions.
Unique features of tube amplifier
As a tube amplifier, the GA-10 operates at a high voltage and generates a higher temperature, which is characteristic of this type of device. For safety, it is recommended to use the amplifier in well-ventilated conditions and not to exceed 24 hours of continuous operation. Such attention to design details ensures the long life of the device.
Compact dimensions and elegant design
Despite its advanced capabilities, the GA-10 stands out for its compact dimensions - 330 x 110 x 380 mm. Stylish design and refined details make the amplifier fit perfectly into any audiophile environment, becoming not only a functional, but also an aesthetic element of the sound system.
Included
- HiFiMAN GA-10 amplifier x1
- Power cable x1
| Manufacturer | HiFiMAN |
|---|---|
| Model | GA-10 Amp |
| Analog signal input | XLR * 1 pair, RCA * 1 pair |
| Headphone output interface | 4-pin balanced*1, 4.4 balanced *1, 6.35mm single-ended *1 |
| Tube model | 12AX7/ECC83*4, 6P14/EL84*4 |
| Maximum input level | 3Vrms@RCA, 6Vrms@XLR, GAIN=3; |
| Frequency response | 20Hz-24KHz(±0.5dB@1KHz) |
| THD+N | 0.001%(2Vin, GAIN=1-3, @1KHz); |
| Output power | 3000MW/300Ω; 600MW/32Ω, @1KHz; |
| Dimensions | 330*110*380 |
Warranty: 24 months