Jack Puluz tie microphone with clip PU426 1.5m 3.5mm Lightning
- Pošiljka danes! Izdelek je na zalogi v našem skladišču na Finskem. Naročila običajno odpošljemo z bliskovito hitrostjo, ponavadi isti ali naslednji delovni dan. Čas dostave je odvisen od ciljne države.
- Pošiljka v 4–7 dneh Izdelek je poslan iz skladišča dobavitelja in najprej dostavljen v naše skladišče na Finskem. Ko bomo vaš naročilo odposlali iz našega skladišča, boste po e-pošti prejeli povezavo za sledenje, običajno v 4–7 delovnih dneh po naročilu.
- Ni na zalogi Izdelek trenutno ni na voljo. Za več informacij pošljite sporočilo naši službi za pomoč strankam.
Prosimo, oglejte si našo Stran o načinih pošiljanja in stroških za več informacij.
Imate kakšno vprašanje?
Raje imamo, da nam pošljete sporočilo preko našega klepeta v živo. Kontaktiranje preko klepeta nam omogoča, da vidimo izdelek in stran, na kateri ste trenutno, zato nam bo lažje in hitreje preveriti izdelek, ki vas zanima.
Pomagamo vam lahko takoj, če smo na voljo, če pa smo zaposleni s pakiranjem naročil, vam bomo odgovorili in vas kontaktirali preko e-pošte in klepeta v živo.
Če ste v naglici, lahko svoje sporočilo pustite preko kontaktnega obrazca.
Želite oddati večje veleprodajno naročilo? Ali želite zahtevati ponudbo za naročilo po meri?
Zahteva za ponudbo:
- Dodajte vse izdelke in količine v košarico
- Pojdite na "Stran s košarico" s klikom na to povezavo ali kliknite gumb "Kontaktirajte nas" v drsniku košarice.
- Na strani "Košarica" lahko kliknete gumb "Kontaktirajte nas" in pošljete sporočilo ter zahtevo za ponudbo za izdelke v vaši košarici.
Opis
Informacije o izdelku
Puluz tie microphone with clip PU426 1.5m 3.5mm Lightning
Puluz PU426 is a compact tie microphone with Lightning connector, which is great for recording interviews, podcasts, videos or online lessons. Thanks to the length of the 1.5-meter cable, you can operate the device freely, and the practical clip allows you to attach the microphone directly to your clothes. It's a versatile tool that works without additional batteries and works with iPhones and other devices with a Lightning port.
Clear sound and effective noise reduction
The PU426 uses active sound recording technology and a capacitive transducer to provide clear and natural sound. The built-in noise cancellation module minimizes ambient noise, making your voice sound clear even in less favorable conditions. The microphone captures audio at 360° and works best at a distance of up to 20 cm from the source - ideal, for example, for close-up recordings such as vlogs and interviews.
Durable construction and a set of accessories
The PU426 is made of durable materials - the PVC used and the shielded enamel cable provide resistance to damage and interference. In the set you will find a set of necessary accessories: two clips, two sponge covers and one deadcat wind shield, so that the microphone can also cope in the field. The whole set is packed in a handy carrying case, making it easy to transport and store the equipment.
Included
- Puluz PU426 microphone × 1
- Deadcat wind shield × 1
- Sponge cover × 2
- Attachment clip × 2
- Storage case × 1
| Manufacturer | Puluz |
|---|---|
| Manufacturer code | PU426 |
| Microphone type | Electret condenser microphone |
| Transducer size | 6.0 × 2.7 mm |
| Directional characteristics | Omnidirectional (dual capacitance) |
| Sensitivity | -34 dB ± 3 dB (0 dB = 1 Pa) |
| Frequency range | 20 Hz - 16,000 Hz |
| Signal-to-noise ratio | >60 dB SPL |
| Impedance | <2.2 kΩ |
| Cable length | 1,5 m |
| Connector type | Lightning (8 Pin) |
| Cable material | PVC, shielded enamel cable |
Warranty: 12 months
Puluz tie microphone with clip PU426 1.5m 3.5mm Lightning
Puluz PU426 is a compact tie microphone with Lightning connector, which is great for recording interviews, podcasts, videos or online lessons. Thanks to the length of the 1.5-meter cable, you can operate the device freely, and the practical clip allows you to attach the microphone directly to your clothes. It's a versatile tool that works without additional batteries and works with iPhones and other devices with a Lightning port.
Clear sound and effective noise reduction
The PU426 uses active sound recording technology and a capacitive transducer to provide clear and natural sound. The built-in noise cancellation module minimizes ambient noise, making your voice sound clear even in less favorable conditions. The microphone captures audio at 360° and works best at a distance of up to 20 cm from the source - ideal, for example, for close-up recordings such as vlogs and interviews.
Durable construction and a set of accessories
The PU426 is made of durable materials - the PVC used and the shielded enamel cable provide resistance to damage and interference. In the set you will find a set of necessary accessories: two clips, two sponge covers and one deadcat wind shield, so that the microphone can also cope in the field. The whole set is packed in a handy carrying case, making it easy to transport and store the equipment.
Included
- Puluz PU426 microphone × 1
- Deadcat wind shield × 1
- Sponge cover × 2
- Attachment clip × 2
- Storage case × 1
| Manufacturer | Puluz |
|---|---|
| Manufacturer code | PU426 |
| Microphone type | Electret condenser microphone |
| Transducer size | 6.0 × 2.7 mm |
| Directional characteristics | Omnidirectional (dual capacitance) |
| Sensitivity | -34 dB ± 3 dB (0 dB = 1 Pa) |
| Frequency range | 20 Hz - 16,000 Hz |
| Signal-to-noise ratio | >60 dB SPL |
| Impedance | <2.2 kΩ |
| Cable length | 1,5 m |
| Connector type | Lightning (8 Pin) |
| Cable material | PVC, shielded enamel cable |
Warranty: 12 months