UNI-T UT681L network cable tester
- Pošiljka danes! Izdelek je na zalogi v našem skladišču na Finskem. Naročila običajno odpošljemo z bliskovito hitrostjo, ponavadi isti ali naslednji delovni dan. Čas dostave je odvisen od ciljne države.
- Pošiljka v 4–7 dneh Izdelek je poslan iz skladišča dobavitelja in najprej dostavljen v naše skladišče na Finskem. Ko bomo vaš naročilo odposlali iz našega skladišča, boste po e-pošti prejeli povezavo za sledenje, običajno v 4–7 delovnih dneh po naročilu.
- Ni na zalogi Izdelek trenutno ni na voljo. Za več informacij pošljite sporočilo naši službi za pomoč strankam.
Prosimo, oglejte si našo Stran o načinih pošiljanja in stroških za več informacij.
Imate kakšno vprašanje?
Raje imamo, da nam pošljete sporočilo preko našega klepeta v živo. Kontaktiranje preko klepeta nam omogoča, da vidimo izdelek in stran, na kateri ste trenutno, zato nam bo lažje in hitreje preveriti izdelek, ki vas zanima.
Pomagamo vam lahko takoj, če smo na voljo, če pa smo zaposleni s pakiranjem naročil, vam bomo odgovorili in vas kontaktirali preko e-pošte in klepeta v živo.
Če ste v naglici, lahko svoje sporočilo pustite preko kontaktnega obrazca.
Želite oddati večje veleprodajno naročilo? Ali želite zahtevati ponudbo za naročilo po meri?
Zahteva za ponudbo:
- Dodajte vse izdelke in količine v košarico
- Pojdite na "Stran s košarico" s klikom na to povezavo ali kliknite gumb "Kontaktirajte nas" v drsniku košarice.
- Na strani "Košarica" lahko kliknete gumb "Kontaktirajte nas" in pošljete sporočilo ter zahtevo za ponudbo za izdelke v vaši košarici.
Opis
Informacije o izdelku
UNI-T UT681L network cable tester
UNI-T UT681L tester is a simple but effective tool for quick diagnosis of network and telephone cables. With it you can easily check the continuity of cables, detect short circuits, crossed pairs and breaks in the circuit. Its compact form, convenient one-button operation and clear LED system make the UT681L perfect for the daily work of network technicians, installers or service technicians.
The most important functions in one device
UT681L supports testing of cables terminated with RJ45 and RJ11 connectors, allowing quick verification of connections in Ethernet networks and telephone lines. LEDs (LED1~LED8 and LED_G) show the status of individual cables, allowing you to detect errors such as breaks, short circuits or crossings. Two modes are available - fast and slow - allowing you to tailor the test to your specific application.
Always ready to work
The device is powered by a standard 9V battery, ensuring mobility and quick startup without the need for charging. An automatic shut-off function after 10 minutes of inactivity extends battery life, and a low-charge indicator reminds you to replace the battery. Thanks to its compact size and low weight, the UT681L will easily fit into any service bag.
Durability and reliability in any situation
The rugged, red-gray housing ensures durability during operation in various conditions. The tester is designed to operate in a temperature range of 0 to 40°C and humidity up to 80%, making it ideal for both office and field use. The product is CE and UKCA certified, confirming its safety and compliance with European standards.
Included
- UNI-T UT681L cable tester (transmitter and receiver)
- 9V battery
- User manual (English language)
| Manufacturer | UNI-T |
|---|---|
| Manufacturer code | UT681L |
| Supported connectors | RJ45, RJ11 |
| Test functions | Detection of short circuits, breaks, crossings and incorrect connections |
| Test modes | fast, slow |
| Result display | LEDs (LED1~LED8, LED_G) |
| Ethernet cable shielding test | Yes |
| Power supply | 9V battery |
| Automatic shutdown function | After 10 minutes of inactivity |
| Low battery indicator | Below 7.2V |
| One button operation | Yes |
| Operating temperature | 0~40°C |
| Storage temperature | -10~50°C |
| Operating humidity | 20~80% RH |
| Storage Humidity | 10~90% RH |
| Maximum operating altitude | ≤2000 m |
| Safety standards | CE EN61326-1:2013, EN61326-2-2:2013 |
| Net weight | transmitter - 87 g, receiver - 51 g |
| Dimensions | Transmitter - 102 × 62 × 28 mm; receiver - 102 × 37 × 28 mm |
| Color | red-gray |
Warranty: 24 months
UNI-T UT681L network cable tester
UNI-T UT681L tester is a simple but effective tool for quick diagnosis of network and telephone cables. With it you can easily check the continuity of cables, detect short circuits, crossed pairs and breaks in the circuit. Its compact form, convenient one-button operation and clear LED system make the UT681L perfect for the daily work of network technicians, installers or service technicians.
The most important functions in one device
UT681L supports testing of cables terminated with RJ45 and RJ11 connectors, allowing quick verification of connections in Ethernet networks and telephone lines. LEDs (LED1~LED8 and LED_G) show the status of individual cables, allowing you to detect errors such as breaks, short circuits or crossings. Two modes are available - fast and slow - allowing you to tailor the test to your specific application.
Always ready to work
The device is powered by a standard 9V battery, ensuring mobility and quick startup without the need for charging. An automatic shut-off function after 10 minutes of inactivity extends battery life, and a low-charge indicator reminds you to replace the battery. Thanks to its compact size and low weight, the UT681L will easily fit into any service bag.
Durability and reliability in any situation
The rugged, red-gray housing ensures durability during operation in various conditions. The tester is designed to operate in a temperature range of 0 to 40°C and humidity up to 80%, making it ideal for both office and field use. The product is CE and UKCA certified, confirming its safety and compliance with European standards.
Included
- UNI-T UT681L cable tester (transmitter and receiver)
- 9V battery
- User manual (English language)
| Manufacturer | UNI-T |
|---|---|
| Manufacturer code | UT681L |
| Supported connectors | RJ45, RJ11 |
| Test functions | Detection of short circuits, breaks, crossings and incorrect connections |
| Test modes | fast, slow |
| Result display | LEDs (LED1~LED8, LED_G) |
| Ethernet cable shielding test | Yes |
| Power supply | 9V battery |
| Automatic shutdown function | After 10 minutes of inactivity |
| Low battery indicator | Below 7.2V |
| One button operation | Yes |
| Operating temperature | 0~40°C |
| Storage temperature | -10~50°C |
| Operating humidity | 20~80% RH |
| Storage Humidity | 10~90% RH |
| Maximum operating altitude | ≤2000 m |
| Safety standards | CE EN61326-1:2013, EN61326-2-2:2013 |
| Net weight | transmitter - 87 g, receiver - 51 g |
| Dimensions | Transmitter - 102 × 62 × 28 mm; receiver - 102 × 37 × 28 mm |
| Color | red-gray |
Warranty: 24 months