FNIRSI index humidity meter WMT-10 hygrometer
- Skickas idag! Produkten finns i lager på vårt lager i Finland. Beställningar skickas blixtsnabbt, vanligtvis samma eller nästa arbetsdag. Leveranstiden beror på destinationslandet.
- Levereras inom 4–7 dagar Produkten skickas från leverantörens lager och levereras först till vårt lager i Finland. Du kommer att få en spårningslänk via e-post när vi har skickat din beställning från vårt lager, vanligtvis inom 4–7 arbetsdagar efter din beställning.
- Slut i lager Produkten är för närvarande otillgänglig. Vänligen skicka ett meddelande till vår kundtjänst för mer information.
Vänligen ta en titt på vår Sida för fraktmetoder och kostnader för mer information.
Har du några frågor?
Vi föredrar att du skickar ditt meddelande via vår livechatt. Att kontakta oss via chatten gör att vi kan se produkten och sidan där du befinner dig just nu, vilket gör det snabbare för oss att kontrollera produkten du är intresserad av.
Vi kan hjälpa dig omedelbart om vi är tillgängliga, om vi är upptagna med att packa beställningar återkommer vi till dig och kontaktar dig via e-post och livechatt.
Om du har bråttom kan du lämna ditt meddelande via kontaktformuläret.
Vill du lägga en större grossistorder? Eller vill du begära offert för en specialbeställning?
Förfrågan om offert:
- Lägg till alla artiklar och kvantiteter i kundvagnen
- Gå till "Kundvagnssidan" genom att klicka på denna länk eller klicka på knappen "Kontakta oss" i slider-kundvagnen.
- På "Kundvagnssidan" kan du klicka på knappen "Kontakta oss" och skicka ett meddelande samt offertförfrågan för dina kundvagnsartiklar.
Beskrivning
Produktinformation
FNIRSI WMT-10 indicative moisture meter hygrometer
The FNIRSI WMT-10 is an advanced, non-invasive moisture meter that provides fast and accurate readings without puncturing surfaces. Thanks to its induction technology and four measurement modes, it will work well with wood, as well as for testing walls, floors or building materials. High resolution (0.1%) and a wide measurement range of up to 75% allow precise results in just seconds. The large 2.4" TFT color screen ensures readability even in dark rooms, and the built-in flashlight further supports work in difficult conditions.
Measurement on any surface - 4 modes of operation
The WMT-10 offers four dedicated modes, including Softwood Mode for softwood (beech, spruce, birch, cherry, etc.), Hardwood Mode for hardwood (teak, walnut, ash, oak, etc.), Masonry Mode for masonry surfaces (brick, stone, compacted ground), and Powdered Wall Mode for plaster and concrete (lime walls, ceilings, floors). Each mode has been programmed with a corresponding measurement range - up to 75% moisture at a measurement depth of 17 mm.
Advanced measurement functions
The meter features a highly sensitive electromagnetic wave sensor and an extra-wide 40.5 × 40.5 cm measuring panel. The device offers light and audible alarms when the limits are exceeded, a HOLD function to stop the reading, and memory for up to 30 measurements. This allows you to easily compare results and return to previous readings at any time.
Durable design and convenient operation
The FNIRSI WMT-10 is not only about functionality, but also about refined ergonomics. The case with a non-slip finish and silicone coating fits well in the hand, and the soft plastic buttons make it easy to operate. The built-in 1,000 mAh battery with USB-C charging ensures long use and can be set to automatically turn off after 5, 10 or 15 minutes. The compact size makes the meter easy to fit in a tool bag.
Versatile applications
The FNIRSI WMT-10 will prove useful for measuring the moisture content of wood, paper, plaster, cement, plaster, concrete or brick. It is an indispensable tool for professionals in the construction, renovation, carpentry and finishing trades - anywhere where accuracy of measurement and not disturbing the surface under test are crucial.
The set includes
- moisture meter
- Type-C cable
- user manual
| Manufacturer | FNIRSI |
|---|---|
| Model | WMT-10 |
| Display | 2.4-inch color TFT screen |
| Screen resolution | 0.1% |
| Maximum detection depth | 17 mm |
| Sensor dimensions | 40.5 x 40.5 mm |
| Working temperature | 0~40°C |
| Measurement range | Gypsum wall: 0-25%, brick wall: 0-43%, soft wood: 0-75%, hard wood: 0-75% |
| Maximum measurement range | 0-75% |
| Error range | ±1.5% |
| Power source | Lithium rechargeable battery with 1000 mAh capacity |
Warranty: 24 months
FNIRSI WMT-10 indicative moisture meter hygrometer
The FNIRSI WMT-10 is an advanced, non-invasive moisture meter that provides fast and accurate readings without puncturing surfaces. Thanks to its induction technology and four measurement modes, it will work well with wood, as well as for testing walls, floors or building materials. High resolution (0.1%) and a wide measurement range of up to 75% allow precise results in just seconds. The large 2.4" TFT color screen ensures readability even in dark rooms, and the built-in flashlight further supports work in difficult conditions.
Measurement on any surface - 4 modes of operation
The WMT-10 offers four dedicated modes, including Softwood Mode for softwood (beech, spruce, birch, cherry, etc.), Hardwood Mode for hardwood (teak, walnut, ash, oak, etc.), Masonry Mode for masonry surfaces (brick, stone, compacted ground), and Powdered Wall Mode for plaster and concrete (lime walls, ceilings, floors). Each mode has been programmed with a corresponding measurement range - up to 75% moisture at a measurement depth of 17 mm.
Advanced measurement functions
The meter features a highly sensitive electromagnetic wave sensor and an extra-wide 40.5 × 40.5 cm measuring panel. The device offers light and audible alarms when the limits are exceeded, a HOLD function to stop the reading, and memory for up to 30 measurements. This allows you to easily compare results and return to previous readings at any time.
Durable design and convenient operation
The FNIRSI WMT-10 is not only about functionality, but also about refined ergonomics. The case with a non-slip finish and silicone coating fits well in the hand, and the soft plastic buttons make it easy to operate. The built-in 1,000 mAh battery with USB-C charging ensures long use and can be set to automatically turn off after 5, 10 or 15 minutes. The compact size makes the meter easy to fit in a tool bag.
Versatile applications
The FNIRSI WMT-10 will prove useful for measuring the moisture content of wood, paper, plaster, cement, plaster, concrete or brick. It is an indispensable tool for professionals in the construction, renovation, carpentry and finishing trades - anywhere where accuracy of measurement and not disturbing the surface under test are crucial.
The set includes
- moisture meter
- Type-C cable
- user manual
| Manufacturer | FNIRSI |
|---|---|
| Model | WMT-10 |
| Display | 2.4-inch color TFT screen |
| Screen resolution | 0.1% |
| Maximum detection depth | 17 mm |
| Sensor dimensions | 40.5 x 40.5 mm |
| Working temperature | 0~40°C |
| Measurement range | Gypsum wall: 0-25%, brick wall: 0-43%, soft wood: 0-75%, hard wood: 0-75% |
| Maximum measurement range | 0-75% |
| Error range | ±1.5% |
| Power source | Lithium rechargeable battery with 1000 mAh capacity |
Warranty: 24 months