UNI-T UT681L network cable tester
- Lähetetään heti! Tuote on varastossamme Suomessa. Tilaukset lähetetään salamannopeasti yleensä samana tai seuraavana arkipäivänä. Toimitusaika riippuu kohdemaasta.
- Toimitetaan 4–7 päivän kuluessa Tuote lähetetään toimittajan varastolta ja toimitetaan ensin varastollemme Suomessa. Saat seurantalinkin sähköpostitse, kun olemme lähettäneet tilauksesi varastoltamme, yleensä 4–7 arkipäivän kuluessa tilauksestasi.
- Ei varastossa Tuote ei ole tällä hetkellä saatavilla. Lähetäthän viestin asiakaspalveluumme lisätietoja varten.
Tutustu ystävällisesti Toimitustavat ja kustannukset -sivu lisätietoja.
Onko sinulla kysyttävää?
Suosittelemme, että lähetät viestisi live-chatin kautta. Chatin käyttäminen antaa meille mahdollisuuden nähdä tuote ja sivu, jolla olet parhaillaan, joten voimme tarkistaa kiinnostuksesi kohteena olevan tuotteen nopeammin.
Voimme auttaa sinua välittömästi, jos olemme saatavilla; jos olemme kiireisiä tilausten pakkaamisessa, otamme sinuun yhteyttä sähköpostitse ja live-chatin kautta.
Jos sinulla on kiire, voit jättää viestisi yhteydenottolomakkeen kautta.
Haluaisitko tehdä suuremman tukkutilauksen? Tai haluatko pyytää tarjousta räätälöidystä tilauksesta?
Tarjouspyyntö:
- Lisää kaikki tuotteet ja määrät ostoskoriin
- Siirry "Ostoskori-sivulle" napsauttamalla tätä linkkiä tai napsauta "Ota yhteyttä" -painiketta liukukorissa.
- Ostoskori-sivulla voit klikata "Ota yhteyttä" -painiketta ja lähettää viestin sekä tarjouspyynnön ostoskorisi tuotteista.
Kuvaus
Tuotetiedot
UNI-T UT681L network cable tester
UNI-T UT681L tester is a simple but effective tool for quick diagnosis of network and telephone cables. With it you can easily check the continuity of cables, detect short circuits, crossed pairs and breaks in the circuit. Its compact form, convenient one-button operation and clear LED system make the UT681L perfect for the daily work of network technicians, installers or service technicians.
The most important functions in one device
UT681L supports testing of cables terminated with RJ45 and RJ11 connectors, allowing quick verification of connections in Ethernet networks and telephone lines. LEDs (LED1~LED8 and LED_G) show the status of individual cables, allowing you to detect errors such as breaks, short circuits or crossings. Two modes are available - fast and slow - allowing you to tailor the test to your specific application.
Always ready to work
The device is powered by a standard 9V battery, ensuring mobility and quick startup without the need for charging. An automatic shut-off function after 10 minutes of inactivity extends battery life, and a low-charge indicator reminds you to replace the battery. Thanks to its compact size and low weight, the UT681L will easily fit into any service bag.
Durability and reliability in any situation
The rugged, red-gray housing ensures durability during operation in various conditions. The tester is designed to operate in a temperature range of 0 to 40°C and humidity up to 80%, making it ideal for both office and field use. The product is CE and UKCA certified, confirming its safety and compliance with European standards.
Included
- UNI-T UT681L cable tester (transmitter and receiver)
- 9V battery
- User manual (English language)
| Manufacturer | UNI-T |
|---|---|
| Manufacturer code | UT681L |
| Supported connectors | RJ45, RJ11 |
| Test functions | Detection of short circuits, breaks, crossings and incorrect connections |
| Test modes | fast, slow |
| Result display | LEDs (LED1~LED8, LED_G) |
| Ethernet cable shielding test | Yes |
| Power supply | 9V battery |
| Automatic shutdown function | After 10 minutes of inactivity |
| Low battery indicator | Below 7.2V |
| One button operation | Yes |
| Operating temperature | 0~40°C |
| Storage temperature | -10~50°C |
| Operating humidity | 20~80% RH |
| Storage Humidity | 10~90% RH |
| Maximum operating altitude | ≤2000 m |
| Safety standards | CE EN61326-1:2013, EN61326-2-2:2013 |
| Net weight | transmitter - 87 g, receiver - 51 g |
| Dimensions | Transmitter - 102 × 62 × 28 mm; receiver - 102 × 37 × 28 mm |
| Color | red-gray |
Warranty: 24 months
UNI-T UT681L network cable tester
UNI-T UT681L tester is a simple but effective tool for quick diagnosis of network and telephone cables. With it you can easily check the continuity of cables, detect short circuits, crossed pairs and breaks in the circuit. Its compact form, convenient one-button operation and clear LED system make the UT681L perfect for the daily work of network technicians, installers or service technicians.
The most important functions in one device
UT681L supports testing of cables terminated with RJ45 and RJ11 connectors, allowing quick verification of connections in Ethernet networks and telephone lines. LEDs (LED1~LED8 and LED_G) show the status of individual cables, allowing you to detect errors such as breaks, short circuits or crossings. Two modes are available - fast and slow - allowing you to tailor the test to your specific application.
Always ready to work
The device is powered by a standard 9V battery, ensuring mobility and quick startup without the need for charging. An automatic shut-off function after 10 minutes of inactivity extends battery life, and a low-charge indicator reminds you to replace the battery. Thanks to its compact size and low weight, the UT681L will easily fit into any service bag.
Durability and reliability in any situation
The rugged, red-gray housing ensures durability during operation in various conditions. The tester is designed to operate in a temperature range of 0 to 40°C and humidity up to 80%, making it ideal for both office and field use. The product is CE and UKCA certified, confirming its safety and compliance with European standards.
Included
- UNI-T UT681L cable tester (transmitter and receiver)
- 9V battery
- User manual (English language)
| Manufacturer | UNI-T |
|---|---|
| Manufacturer code | UT681L |
| Supported connectors | RJ45, RJ11 |
| Test functions | Detection of short circuits, breaks, crossings and incorrect connections |
| Test modes | fast, slow |
| Result display | LEDs (LED1~LED8, LED_G) |
| Ethernet cable shielding test | Yes |
| Power supply | 9V battery |
| Automatic shutdown function | After 10 minutes of inactivity |
| Low battery indicator | Below 7.2V |
| One button operation | Yes |
| Operating temperature | 0~40°C |
| Storage temperature | -10~50°C |
| Operating humidity | 20~80% RH |
| Storage Humidity | 10~90% RH |
| Maximum operating altitude | ≤2000 m |
| Safety standards | CE EN61326-1:2013, EN61326-2-2:2013 |
| Net weight | transmitter - 87 g, receiver - 51 g |
| Dimensions | Transmitter - 102 × 62 × 28 mm; receiver - 102 × 37 × 28 mm |
| Color | red-gray |
Warranty: 24 months