xTool SafetyPro™ AP2 smoke canister
- Lähetetään heti! Tuote on varastossamme Suomessa. Tilaukset lähetetään salamannopeasti yleensä samana tai seuraavana arkipäivänä. Toimitusaika riippuu kohdemaasta.
- Toimitetaan 4–7 päivän kuluessa Tuote lähetetään toimittajan varastolta ja toimitetaan ensin varastollemme Suomessa. Saat seurantalinkin sähköpostitse, kun olemme lähettäneet tilauksesi varastoltamme, yleensä 4–7 arkipäivän kuluessa tilauksestasi.
- Ei varastossa Tuote ei ole tällä hetkellä saatavilla. Lähetäthän viestin asiakaspalveluumme lisätietoja varten.
Tutustu ystävällisesti Toimitustavat ja kustannukset -sivu lisätietoja.
Onko sinulla kysyttävää?
Suosittelemme, että lähetät viestisi live-chatin kautta. Chatin käyttäminen antaa meille mahdollisuuden nähdä tuote ja sivu, jolla olet parhaillaan, joten voimme tarkistaa kiinnostuksesi kohteena olevan tuotteen nopeammin.
Voimme auttaa sinua välittömästi, jos olemme saatavilla; jos olemme kiireisiä tilausten pakkaamisessa, otamme sinuun yhteyttä sähköpostitse ja live-chatin kautta.
Jos sinulla on kiire, voit jättää viestisi yhteydenottolomakkeen kautta.
Haluaisitko tehdä suuremman tukkutilauksen? Tai haluatko pyytää tarjousta räätälöidystä tilauksesta?
Tarjouspyyntö:
- Lisää kaikki tuotteet ja määrät ostoskoriin
- Siirry "Ostoskori-sivulle" napsauttamalla tätä linkkiä tai napsauta "Ota yhteyttä" -painiketta liukukorissa.
- Ostoskori-sivulla voit klikata "Ota yhteyttä" -painiketta ja lähettää viestin sekä tarjouspyynnön ostoskorisi tuotteista.
Kuvaus
Tuotetiedot
xTool SafetyPro™ AP2 Smoke Absorber
The xTool SafetyPro™ AP2 is a powerful smoke absorber that provides optimal air quality when working with laser engravers. With an advanced filtration system, it effectively removes harmful particles and odors, creating a safe and comfortable working environment. Whether you're using the xTool Laserbox, xTool M1, or xTool D1/D1 Pro with an enclosure, the AP2 works perfectly with any of these devices to guarantee the best results.
Powerful, three-stage filtration
The xTool SafetyPro™ AP2 is equipped with an advanced filtration system consisting of three layers. The pre-filter captures larger particulates, the middle filter removes up to 99.97% of microscopic particles as small as 0.03 μm, and the main filter effectively absorbs harmful gases and odors. In this way, the air remains clean and the risk of inhaling harmful substances is minimized.
Quiet operation for complete focus
With low noise emissions, the xTool SafetyPro™ AP2 allows you to work in a quiet environment without unnecessary distractions. The unit's quiet operation promotes concentration and keeps you comfortable, no matter how long the engraving process takes.
Sealed design and easy operation
The AP2's airtight housing prevents contaminants from escaping to the outside, ensuring that fresh air is kept in the room. In addition, replacing the filter is quick and easy - simply remove the cover, remove the used filter and insert a new filter set. This solution minimizes downtime and ensures that the device is always ready to work.
Mobility and compatibility
The xTool SafetyPro™ AP2 is compact and easy to carry, so you can easily place it where you need it most. The device is fully compatible with xTool's laser engravers, such as the Laserbox, M1 and D1/D1 Pro with case accessory. This makes the AP2 a versatile and practical addition to any workshop.
Create in a healthy environment
With the xTool SafetyPro™ AP2 canister, you can work without worrying about air quality. The device eliminates smoke and unpleasant odors, which significantly increases the comfort of your work and takes care of your health. No matter what type of material you are working with, the AP2 allows you to enjoy clean air and better efficiency.
Included
- P5010391 x1
- Filter set x1
- Pipe clamp x3
- Smoke exhaust pipe x1
- Screw set x1
- Power cable x1
- Pipe connector x2
- Wall connector x1
- Screwdrivers (Phillips and flathead) x2
- User manual x1
| Manufacturer | xTool |
|---|---|
| Model | P5010391 |
| Adapted machine | P2S, P2, S1, M1 Ultra, F1 Ultra, D1, M1, F1 |
| Product size | 290*491*542mm |
| Product weight | 20.7 kg |
| Control mode | Touch button, four adjustable gears |
| Pre-filtration system | Cyclone separation |
| Rated power | 220W |
| Filter layers | SuperCyclone filter, pre-filter, medium efficiency filter, activated carbon layer, extra dense carbon mesh, high efficiency filter |
| Noise | 55dB |
Warranty: 24 months
xTool SafetyPro™ AP2 Smoke Absorber
The xTool SafetyPro™ AP2 is a powerful smoke absorber that provides optimal air quality when working with laser engravers. With an advanced filtration system, it effectively removes harmful particles and odors, creating a safe and comfortable working environment. Whether you're using the xTool Laserbox, xTool M1, or xTool D1/D1 Pro with an enclosure, the AP2 works perfectly with any of these devices to guarantee the best results.
Powerful, three-stage filtration
The xTool SafetyPro™ AP2 is equipped with an advanced filtration system consisting of three layers. The pre-filter captures larger particulates, the middle filter removes up to 99.97% of microscopic particles as small as 0.03 μm, and the main filter effectively absorbs harmful gases and odors. In this way, the air remains clean and the risk of inhaling harmful substances is minimized.
Quiet operation for complete focus
With low noise emissions, the xTool SafetyPro™ AP2 allows you to work in a quiet environment without unnecessary distractions. The unit's quiet operation promotes concentration and keeps you comfortable, no matter how long the engraving process takes.
Sealed design and easy operation
The AP2's airtight housing prevents contaminants from escaping to the outside, ensuring that fresh air is kept in the room. In addition, replacing the filter is quick and easy - simply remove the cover, remove the used filter and insert a new filter set. This solution minimizes downtime and ensures that the device is always ready to work.
Mobility and compatibility
The xTool SafetyPro™ AP2 is compact and easy to carry, so you can easily place it where you need it most. The device is fully compatible with xTool's laser engravers, such as the Laserbox, M1 and D1/D1 Pro with case accessory. This makes the AP2 a versatile and practical addition to any workshop.
Create in a healthy environment
With the xTool SafetyPro™ AP2 canister, you can work without worrying about air quality. The device eliminates smoke and unpleasant odors, which significantly increases the comfort of your work and takes care of your health. No matter what type of material you are working with, the AP2 allows you to enjoy clean air and better efficiency.
Included
- P5010391 x1
- Filter set x1
- Pipe clamp x3
- Smoke exhaust pipe x1
- Screw set x1
- Power cable x1
- Pipe connector x2
- Wall connector x1
- Screwdrivers (Phillips and flathead) x2
- User manual x1
| Manufacturer | xTool |
|---|---|
| Model | P5010391 |
| Adapted machine | P2S, P2, S1, M1 Ultra, F1 Ultra, D1, M1, F1 |
| Product size | 290*491*542mm |
| Product weight | 20.7 kg |
| Control mode | Touch button, four adjustable gears |
| Pre-filtration system | Cyclone separation |
| Rated power | 220W |
| Filter layers | SuperCyclone filter, pre-filter, medium efficiency filter, activated carbon layer, extra dense carbon mesh, high efficiency filter |
| Noise | 55dB |
Warranty: 24 months